Create multi vlans problem



  • Dear Friends,

    I'm create multi Vlans for use into departments (10 vlans total), but, I nothing access services or hosts in this VLans.

    I create rules to allow access in this networks in each VLan (pass all).

    In console, return this message during ping test (Diagnostics: Ping):

    Ping output:

    PING 192.168.229.130 (192.168.229.130) from 200.183.229.129: 56 data bytes

    –- 192.168.229.130 ping statistics ---
    3 packets transmitted, 0 packets received, 100% packet loss

    The configuration to this VLan is:

    <opt1><if>vlan0</if>
                            <descr>EBRDiadema</descr>
                            <bridge><ipaddr>200.183.229.129</ipaddr>
                            <subnet>26</subnet>
                            <gateway><spoofmac>00:08:54:45:d1:e2</spoofmac>
                            <mtu><enable></enable></mtu></gateway></bridge></opt1>

    Some sugestion to solv this problem?

    Thanks.

    []
    Sergio Lima


Log in to reply