Speedtest CLI. Run speedtest on pfSense box
-
I'm suggesting that Speedtest could be using the correct source IP but that traffic is still using the default route via WAN1. Check the state table when you're testing to see if that traffic is being NAT'd from the WAN2 address to the WAN1 address.
That would not normally be possible though. The auto outbound NAT rules on WAN1 would not include the WAN2 address.Steve
-
Just set up on Version 2.6.0-DEVELOPMENT (amd64)
Really nice, thanks
Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
Current: 2100 MHz, Max: 2101 MHz
16 CPUs: 1 package(s) x 8 core(s) x 2 hardware threads
AES-NI CPU Crypto: Yes (active)
QAT Crypto: No -
@aln Thanks for your plugin.
I just installed it but couldn't get it working with the latest speedtest for FreeBSD (https://www.speedtest.net/apps/cli).
I manually edited 1 line in the php ( $results = shell_exec("speedtest -f json");), but got stuck there.Many thanks if you (or anyone) can offer support. :)
Edit: In the interim, it did work using the earlier speedtest-cli ( pkg install -y py38-speedtest-cli-2.1.3 ) and unedited php
-
Sorry, but had to interject here. It seem @johnpoz has a very narrow view of what pfsense is, despite being a forum mod.
Maybe due to supporting a majority of non-technical users, he only sees the cases where pfsense is used on the bare minimum hardware and only for IP routing.
The reality of pfsense is that it is also for power users. Maybe they @johnpoz doesn't hear about the advanced use cases as much.Using pfsense to perform periodic ISP speed tests is absolutely a fair ask.
pfsense has packages that make it way more than just a router.In addition to "just being a router" it is also a DHCP server of course, but also can be:
- Web Server
- Captive Portal
- DNS Server
- RADIUS Authentication Server
- Gateway monitoring Daemon
- Squid Proxy
- NG Firewall (pfblocker)
- Dynamic DNS Client
- VPN Client and VPN Server
- and much, much more.
Yes, all of these services running does require good hardware, but not even a full desktop sucking down 95W. A mini PC like a NUC does work great.
pfsense IS SUPPOSED to also be a client in many situations. VPN is a good example. It's OpenVPN package allows a user to create a persistent VPN client on the pfsense to a VPN provider on the Internet. That's more resource intensive than a periodic speedtest.
And the built in "dpinger" Gateway Monitoring Daemon has the sole purpose of keeping an eye on the WAN gateways to see if they go down. It pings the ISP periodically. A periodic speedtest would be a natural extension of this function. DDNS is another client that goes out to a service on the internet to update the Public IP.
So it is absolutely a proper request that a speedtest client be an available feature.Regarding "slow results" from speedtest-cli running on the pfsense, this is due to the sivel package being old/buggy and not using the closest servers compared to the Speedtest.net website and/or the Ookla provided cli client.
Power users understand that speedtest.net isn't going to be 100% perfect, but it does provide a source of trending data that will help users if they need to show their ISP that they are not getting what they pay for.
-
B bearhntr referenced this topic on
-
S stephenw10 referenced this topic on
-
S stephenw10 referenced this topic on
-
P provels referenced this topic on
-
Hello to all,
My need : Evaluate the speed of my ISP directly on my firewall because my machines are behind other network equipments (Switch, ect...).
My hardware, a DELL R230 server (CPU E3-1260L v5 @ 2.90GHz) with pfSense 2.6.0-RELEASE (amd64) FreeBSD 12.3-STABLE.After a quick search on google, I installed the speeptest package by following some tutorials found everywhere from the Diagnostics > Command Prompt menu
Unfortunately I have a message ERROR: Unable to connect to servers to test latency.
Is there any specific opening to do for the application to work? Someone can help me to open it properly from pfSense please?
If not, someone can tell me more ?I ran the following commands:
Translated with www.DeepL.com/Translator (free version)
# pkg search speedtest
py38-speedtest-cli-2.1.3 Command line interface for testing internet bandwidth# pkg install -y py38-speedtest-cli-2.1.3
# speedtest-cli
Retrieving speedtest.net configuration...
Testing from Free SAS (82.xx.xx.xx)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
ERROR: Unable to connect to servers to test latency.# speedtest --version
speedtest-cli 2.1.3
Python 3.8.12 (default, Jan 12 2022, 15:22:58) [Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aBest Regards.
-
@elrick75
That package is extremely old and may not still work with current BSD versions. I haven't tried it so I can't say for sure, but this one from Ookla does work.
https://www.speedtest.net/apps/cli -
@elrick75 Try
speedtest --secure -
@fireodo said in Speedtest CLI. Run speedtest on pfSense box:
speedtest --secure
Same result :
Retrieving speedtest.net configuration... Testing from Free SAS (82.xx.xx.xx)... Retrieving speedtest.net server list... Selecting best server based on ping... ERROR: Unable to connect to servers to test latency. -
@elrick75 said in Speedtest CLI. Run speedtest on pfSense box:
@fireodo said in Speedtest CLI. Run speedtest on pfSense box:
speedtest --secure
Same result :
Retrieving speedtest.net configuration... Testing from Free SAS (82.xx.xx.xx)... Retrieving speedtest.net server list... Selecting best server based on ping... ERROR: Unable to connect to servers to test latency.Can you reach speedtest.net in a browser? Perhaps something in your system is blocking the access to that server.
-
@fireodo said in Speedtest CLI. Run speedtest on pfSense box:
speedtest.net
I reach it... https://www.speedtest.net/ works fine
@jarhead
How to install it ? -
@elrick75 said in Speedtest CLI. Run speedtest on pfSense box:
@fireodo said in Speedtest CLI. Run speedtest on pfSense box:
speedtest.net
I reach it... https://www.speedtest.net/ works fine
Hmmm ...
-
The speedtest pkg in out repo works fine here:
[22.05-RELEASE][admin@fw1.stevew.lan]/root: pkg-static install py38-speedtest-cli Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. The following 1 package(s) will be affected (of 0 checked): New packages to be INSTALLED: py38-speedtest-cli: 2.1.3 [pfSense] Number of packages to be installed: 1 38 KiB to be downloaded. Proceed with this action? [y/N]: y [1/1] Fetching py38-speedtest-cli-2.1.3.pkg: 100% 38 KiB 39.0kB/s 00:01 Checking integrity... done (0 conflicting) [1/1] Installing py38-speedtest-cli-2.1.3... [1/1] Extracting py38-speedtest-cli-2.1.3: 100% [22.05-RELEASE][admin@fw1.stevew.lan]/root: rehash [22.05-RELEASE][admin@fw1.stevew.lan]/root: speedtest-cli Retrieving speedtest.net configuration... Testing from Plusnet (X.X.X.X)... Retrieving speedtest.net server list... Selecting best server based on ping... Hosted by Jump Networks Ltd (London) [9.58 km]: 9.422 ms Testing download speed................................................................................ Download: 61.69 Mbit/s Testing upload speed...................................................................................................... Upload: 18.83 Mbit/sSteve
-
@jimp said in Speedtest CLI. Run speedtest on pfSense box:
That looks nice, though it's usually better to test bandwidth through the firewall and not from the firewall itself. pfSense has been optimized to work in a routing role, so sometimes you might see reduced numbers when pfSense itself is acting like the client.
Dear John!
With all my honor and appreciate to You.
As we had discuss some time before, there are two points of view on TESTING link parameters:
- From border firewall to outside (in our case pfSense);
- Through border firewall to outside (mean nearest ISP fiber splitter/switch/router)
I have a thought that approximately 85-90% of this pfSense users forum mean âWHAT IS EXACTLY MY UPLINK BANDWIDTHâ when thinking about link bandwidth testing services like speedtest/fast/librespeed.
And only we âsqueezeâ as much as possible from ISP uplink (this mean cabling, good connectors, may be spending hours on ISP hotline to resolve some issue on ISP hardware You connected up...), we must doing next step to âWHAT IS PING/BANDWIDTH FROM MY PC TO IP/ADDRESS OUTSIDE AND BACKâ.
This mean we quickly goes to ârabbit holeâ for newbies âWHATS GOING ON INSIDE PFSENSE SERVERâ (this mean adjustments of Settings, tune limits, etc...).
So logically looks like BOTH OF THIS TESTING ARE NEEDED.
-
@sergei_shablovsky said in Speedtest CLI. Run speedtest on pfSense box:
BOTH OF THIS TESTING ARE NEEDED.
And that could often confuse them even more.. When they test from their router and do not see the speed they expect..
There is a huge difference between a router, and a server/client when it comes to processing power needed and what it is optimized to do.
There is big difference in requirements in hardware to move a packet from one interface to another and change its source IP and port, etc. ie nat.. and processing all things needed to test speed..
Just because a "router" can process packets and get speed X, doesn't mean that the "router" can do that when acting as the client.. If your internet speed is low, your prob fine - of your router is beefy enough, etc. But when you start talking high speeds like gig, and low resource hardware used in "routers" that can quite easy route/firewall traffic at gig.. Doesn't always mean that it can be a client at those speeds.
I get why that might be confusing for the new user - not saying testing from the router can not be of some use in some cases, but I sure would not use a test from router to troubleshoot not seeing speed X from isp, unless you have tested before from that router and seen the speeds, etc.
If you had tested from router before and seen speed X, and then test it another day and only see something much lower than X - then sure that is an indication that something is wrong.
What I wouldn't assume is isp says I should see 900mbps, and then never seeing 900mbps from some cli running on my router and only seeing 700mbps for example that isp is problem, etc. Or that there is anything wrong or needing adjustment on the router.
example:
I see my speed from client that I pay for 500mbps, but from pfsense I do not - there is nothing wrong.. I wouldn't expect to see full speed from my router. What I expect is my router to be be able to route at my isp speed.
-
@stephenw10 I see but it doesn't explain to me why not on my side. How to troubleshoot it?
-
FWIW, my server that runs the Python CL version of Speedtest started failing to provide data. After some searching I found I needed to add the ' --secure ' switch to my batch file. YMMV.
This is the line I use to retrieve the list of servers:
C:\Python27\python.exe C:\Python27\Lib\site-packages\speedtest.py --list --secure > serverlist.txt -
Yes I would try
--listand see if that fails with or without--secure.I assume you can ping other targets?
Steve
-
# speedtest --secure Retrieving speedtest.net configuration... Testing from Free SAS (82.XXX.XXX.XXX)... Retrieving speedtest.net server list... Selecting best server based on ping... ERROR: Unable to connect to servers to test latency.# speedtest --list Retrieving speedtest.net configuration...From my computer :
c:\>ping speedtest.net Envoi dâune requĂȘte 'ping' sur speedtest.net [151.101.2.219] avec 32 octets de donnĂ©es : RĂ©ponse de 151.101.2.219 : octets=32 temps=3 ms TTL=59 RĂ©ponse de 151.101.2.219 : octets=32 temps=3 ms TTL=59 RĂ©ponse de 151.101.2.219 : octets=32 temps=3 ms TTL=59 RĂ©ponse de 151.101.2.219 : octets=32 temps=3 ms TTL=59 Statistiques Ping pour 151.101.2.219: Paquets : envoyĂ©s = 4, reçus = 4, perdus = 0 (perte 0%), DurĂ©e approximative des boucles en millisecondes : Minimum = 3ms, Maximum = 3ms, Moyenne = 3ms -
That version seems to work fine for me from the FW even w/o --secure. Maybe check out your FW logs. Maybe you're blocking yourself.
[22.05-RELEASE][root@fw.workgroup]/root: pkg-static install py38-speedtest-cli Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. pkg-static: warning: database version 36 is newer than libpkg(3) version 35, but still compatible The following 1 package(s) will be affected (of 0 checked): New packages to be INSTALLED: py38-speedtest-cli: 2.1.3 [pfSense] Number of packages to be installed: 1 38 KiB to be downloaded. Proceed with this action? [y/N]: y [1/1] Fetching py38-speedtest-cli-2.1.3.pkg: 100% 38 KiB 39.0kB/s 00:01 Checking integrity... done (0 conflicting) [1/1] Installing py38-speedtest-cli-2.1.3... [1/1] Extracting py38-speedtest-cli-2.1.3: 100% [22.05-RELEASE][root@fw.workgroup]/root: rehash [22.05-RELEASE][root@fw.workgroup]/root: speedtest Retrieving speedtest.net configuration... Testing from Comcast Cable (73.111.129.66)... Retrieving speedtest.net server list... Selecting best server based on ping... Hosted by Windstream (Chicago, IL) [69.50 km]: 14.881 ms Testing download speed............................................................................... .Download: 81.45 Mbit/s Testing upload speed...................................................................................................... Upload: 12.02 Mbit/s [22.05-RELEASE][root@fw.workgroup]/root: -
But can you ping things from pfSense where the script is running?
However if it fails to pull a list of servers it's probably not a ping problem.
