Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfSense randomly loses connection, and reboot is only solution.

    Scheduled Pinned Locked Moved Hardware
    28 Posts 7 Posters 10.2k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      rocketdog
      last edited by

      So, I just did and fresh install on a new computer. Using the built-in NIC as LAN, and an USB-nic for WAN.
      After a few hours I lost connection to Internet, but I still could reach the FW, and I all clients could ping the GW. All DNS:es were unreachable tho.
      The only solution to solve the problem was to reboot.

      Here are some info, just after the connection-loss:

      $ dmesg
      Copyright (c) 1992-2012 The FreeBSD Project.
      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      	The Regents of the University of California. All rights reserved.
      FreeBSD is a registered trademark of The FreeBSD Foundation.
      FreeBSD 8.3-RELEASE-p11 #0: Wed Sep 11 18:39:44 EDT 2013
          root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
      Timecounter "i8254" frequency 1193182 Hz quality 0
      CPU: Intel(R) Celeron(R) CPU 2.53GHz (2527.08-MHz 686-class CPU)
        Origin = "GenuineIntel"  Id = 0xf41  Family = f  Model = 4  Stepping = 1
        Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x451d <sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,xtpr>AMD Features=0x100000 <nx>TSC: P-state invariant
      real memory  = 2147483648 (2048 MB)
      avail memory = 2072616960 (1976 MB)
      ACPI APIC Table: <dell  sx280 ="">
      ioapic0: Changing APIC ID to 8
      ioapic0 <version 2.0=""> irqs 0-23 on motherboard
      lapic0: Forcing LINT1 to edge trigger
      wlan: mac acl policy registered
      ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07bb6f0, 0) error 1
      ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bb790, 0) error 1
      ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bb830, 0) error 1
      kbd1 at kbdmux0
      cryptosoft0: <software crypto=""> on motherboard
      padlock0: No ACE support.
      acpi0: <dell sx280 =""> on motherboard
      acpi0: [ITHREAD]
      acpi0: Power Button (fixed)
      acpi0: reservation of 0, a0000 (3) failed
      acpi0: reservation of 100000, f00000 (3) failed
      acpi0: reservation of 1000000, 7e686c00 (3) failed
      Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
      acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
      cpu0: <acpi cpu=""> on acpi0
      acpi_button0: <power button=""> on acpi0
      pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
      pci0: <acpi pci="" bus=""> on pcib0
      pcib1: <acpi pci-pci="" bridge=""> irq 16 at device 1.0 on pci0
      pci1: <acpi pci="" bus=""> on pcib1
      vgapci0: <vga-compatible display=""> port 0xecd8-0xecdf mem 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at device 2.0 on pci0
      agp0: <intel 82915g="" (915g="" gmch)="" svga="" controller=""> on vgapci0
      agp0: aperture size is 256M, detected 7932k stolen memory
      vgapci1: <vga-compatible display=""> mem 0xdff80000-0xdfffffff at device 2.1 on pci0
      pcib2: <acpi pci-pci="" bridge=""> irq 16 at device 28.0 on pci0
      pci2: <acpi pci="" bus=""> on pcib2
      bge0: <broadcom netxtreme="" gigabit="" ethernet="" controller,="" asic="" rev.="" 0x004001=""> mem 0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2
      bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E
      miibus0: <mii bus=""> on bge0
      brgphy0: <bcm5750 10="" 100="" 1000basetx="" phy=""> PHY 1 on miibus0
      brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
      bge0: [ITHREAD]
      uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a=""> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
      uhci0: [ITHREAD]
      uhci0: LegSup = 0x3000
      usbus0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a=""> on uhci0
      uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b=""> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
      uhci1: [ITHREAD]
      usbus1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b=""> on uhci1
      uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c=""> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
      uhci2: [ITHREAD]
      usbus2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c=""> on uhci2
      uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d=""> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
      uhci3: [ITHREAD]
      usbus3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d=""> on uhci3
      ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller=""> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
      ehci0: [ITHREAD]
      usbus4: EHCI version 1.0
      usbus4: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller=""> on ehci0
      pcib3: <acpi pci-pci="" bridge=""> at device 30.0 on pci0
      pci3: <acpi pci="" bus=""> on pcib3
      isab0: <pci-isa bridge=""> at device 31.0 on pci0
      isa0: <isa bus=""> on isab0
      atapci0: <intel ich6="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
      ata0: <ata channel=""> at channel 0 on atapci0
      ata0: [ITHREAD]
      ata1: <ata channel=""> at channel 1 on atapci0
      ata1: [ITHREAD]
      atapci1: <intel ich6="" sata150="" controller=""> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
      atapci1: [ITHREAD]
      ata2: <ata channel=""> at channel 0 on atapci1
      ata2: [ITHREAD]
      ata3: <ata channel=""> at channel 1 on atapci1
      ata3: [ITHREAD]
      pci0: <serial bus,="" smbus=""> at device 31.3 (no driver attached)
      acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0
      Timecounter "HPET" frequency 14318180 Hz quality 900
      atrtc0: <at realtime="" clock=""> port 0x70-0x7f irq 8 on acpi0
      ppc0: <parallel port=""> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
      ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
      ppc0: FIFO with 16/16/8 bytes threshold
      ppc0: [ITHREAD]
      ppbus0: <parallel port="" bus=""> on ppc0
      plip0: <plip network="" interface=""> on ppbus0
      plip0: [ITHREAD]
      lpt0: <printer> on ppbus0
      lpt0: [ITHREAD]
      lpt0: Interrupt-driven port
      ppi0: <parallel i="" o=""> on ppbus0
      uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
      uart0: [FILTER]
      pmtimer0 on isa0
      orm0: <isa option="" roms=""> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff,0xcc800-0xcdfff,0xce000-0xcffff pnpid ORM0000 on isa0
      sc0: <system console=""> at flags 0x100 on isa0
      sc0: VGA <16 virtual consoles, flags=0x300>
      vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
      atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0
      atkbd0: <at keyboard=""> irq 1 on atkbdc0
      kbd0 at atkbd0
      atkbd0: [GIANT-LOCKED]
      atkbd0: [ITHREAD]
      p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0
      Timecounter "TSC" frequency 2527082964 Hz quality 800
      Timecounters tick every 1.000 msec
      IPsec: Initialized Security Association Processing.
      usbus0: 12Mbps Full Speed USB v1.0
      usbus1: 12Mbps Full Speed USB v1.0
      usbus2: 12Mbps Full Speed USB v1.0
      usbus3: 12Mbps Full Speed USB v1.0
      usbus4: 480Mbps High Speed USB v2.0
      ugen0.1: <intel> at usbus0
      uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0
      ugen1.1: <intel> at usbus1
      uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus1
      ugen2.1: <intel> at usbus2
      uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus2
      ugen3.1: <intel> at usbus3
      uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus3
      ugen4.1: <intel> at usbus4
      uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus4
      acd0: CDROM <hl-dt-st gcr-8240n="" 1.06=""> at ata0-master UDMA33 
      ad4: 38146MB <wdc wd400bd-75jma0="" 05.01c05=""> at ata2-master UDMA100 SATA
      uhub0: 2 ports with 2 removable, self powered
      uhub1: 2 ports with 2 removable, self powered
      uhub2: 2 ports with 2 removable, self powered
      uhub3: 2 ports with 2 removable, self powered
      uhub4: 8 ports with 8 removable, self powered
      ugen4.2: <vendor 0x0b95=""> at usbus4
      axe0: <vendor 2="" 0x0b95="" product="" 0x772a,="" rev="" 2.00="" 0.01,="" addr=""> on usbus4
      Trying to mount root from ufs:/dev/ad4s1a
      miibus1: <mii bus=""> on axe0
      ukphy0: <generic ieee="" 802.3u="" media="" interface=""> PHY 16 on miibus1
      ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
      ue0: <usb ethernet=""> on axe0
      ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
                  add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
      ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
                   Consider tuning vm.kmem_size and vm.kmem_size_max
                   in /boot/loader.conf.
      ZFS filesystem version 5
      ZFS storage pool version 28
      ue0: link state changed to DOWN
      bge0: link state changed to DOWN
      tun2: changing name to 'ovpns2'
      tun3: changing name to 'ovpns3'
      ovpns2: link state changed to UP
      pflog0: promiscuous mode enabled
      ue0: link state changed to UP
      bge0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP
      ue0: link state changed to DOWN
      ue0: link state changed to UP</usb></generic></mii></vendor></vendor></wdc></hl-dt-st></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></at></keyboard></generic></system></isa></parallel></printer></plip></parallel></parallel></at></high></serial></ata></ata></intel></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></bcm5750></mii></broadcom></acpi></acpi></vga-compatible></intel></vga-compatible></acpi></acpi></acpi></acpi></power></acpi></dell></software></version></dell ></nx></sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>
      

      I have no idea if the connection-loss started when ue0 seems to have went crazy.

      Here is a picture of System Activity after connection was lost:

      Help would me much appreciated, since I finally upgraded the CPU from 450mhz to 2.53ghz, and 192mb ram > 2gb.

      Thanks.

      1 Reply Last reply Reply Quote 0
      • R
        rocketdog
        last edited by

        Forget to say that the USB-NIC is Asix ax88772b, using axe_4.ko

        [2.1-RELEASE][admin@firewall.ninya.org]/root(4): usbconfig -u 4 dump_device_desc
        
        ugen4.2: <product 0x772a="" vendor="" 0x0b95="">at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
        
          bLength = 0x0012
          bDescriptorType = 0x0001
          bcdUSB = 0x0200
          bDeviceClass = 0x00ff
          bDeviceSubClass = 0x00ff
          bDeviceProtocol = 0x0000
          bMaxPacketSize0 = 0x0040
          idVendor = 0x0b95
          idProduct = 0x772a
          bcdDevice = 0x0001
          iManufacturer = 0x0001  <asix elec.="" corp.="">iProduct = 0x0002  <ax88x72a>iSerialNumber = 0x0003  <000002>
          bNumConfigurations = 0x0001</ax88x72a></asix></product> 
        
        1 Reply Last reply Reply Quote 0
        • B
          BeerHat
          last edited by

          Did you already do the MBUF tweak?  In /boot/loader.conf… you might try setting kern.ipc.nmbclusters="32768".  The default I believe is 0.  You'll need to reboot the firewall after the change.

          This fixed some goofy NIC behavior in 2 of my remote office deployments.

          1 Reply Last reply Reply Quote 0
          • M
            mikeisfly
            last edited by

            I had the same issue using a USB nic. The fix was to ditch the USB nic and do both lan and wan on the same port using vlans. Of course you will need a switch capable of vlans to make this work.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              @rocketdog:

              Forget to say that the USB-NIC is Asix ax88772b, using axe_4.ko

              Do you just mean its using the axe driver or you have actually loaded some alternative kernel module? I'm not familiar with 'axe_4.ko'.

              Steve

              1 Reply Last reply Reply Quote 0
              • R
                rocketdog
                last edited by

                @BeerHat:

                Did you already do the MBUF tweak?  In /boot/loader.conf… you might try setting kern.ipc.nmbclusters="32768".  The default I believe is 0.  You'll need to reboot the firewall after the change.

                This fixed some goofy NIC behavior in 2 of my remote office deployments.

                Thanks! I'll give this a try.

                P.S. The FW hasn't dropped in 24 hours now!

                @mikeisfly:

                I had the same issue using a USB nic. The fix was to ditch the USB nic and do both lan and wan on the same port using vlans. Of course you will need a switch capable of vlans to make this work.

                The thing is, I don't want to get rid of my USB-nic.

                @stephenw10:

                Do you just mean its using the axe driver or you have actually loaded some alternative kernel module? I'm not familiar with 'axe_4.ko'.

                Steve

                Yeah, I just meant it's using the axe driver. I dunno why I wrote "axe_4.ko"

                1 Reply Last reply Reply Quote 0
                • R
                  rocketdog
                  last edited by

                  I noticed this during bootup:

                  ukphy0: <generic ieee="" 802.3u="" media="" interface=""> PHY 16 on miibus1
                  ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
                  ue0: <usb ethernet=""> on axe0
                  usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored)
                  usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED
                  ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
                              add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
                  ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
                               Consider tuning vm.kmem_size and vm.kmem_size_max
                               in /boot/loader.conf.</usb></generic>
                  

                  Anyone knows what those STALLED-errors means?

                  And how should the loader.conf look?

                  vm.kmem_size="4355443200"
                  vm.kmem_size_max="4355443200"
                  

                  or```
                  vm.kmem_size=4355443200
                  vm.kmem_size_max=4355443200

                  1 Reply Last reply Reply Quote 0
                  • R
                    rocketdog
                    last edited by

                    Google didnt gave me much, so I give it a shot here:
                    Another problem I've found is that I can't reach http://192.168.0.1 with Mozilla (with or without safemode), only through Chrome. With Mozilla it just keeps "reading 192.168.0.1", while in Chrome it's in matter of milliseconds.

                    And by the way, the comp I'm running the current FW on is an Dell SX280, I'm not sure if you guys can see it directly through dmesg, but I cannot get the thermal sensors to work. Any ideas?

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      The thermal sensors dashboard widget (I assume that's what you mean?) relies on the sensor selection in System: Advanced: Miscellaneous:. Since the SX280 is pre-Core architecture it can only use ACPI to read the CPU temperature which relies on Dell having written a bios that passes that info to a non Windows OS.
                      If you just want to know what the CPU temp is you can probably use the mbmon FreeBSD package to read it but it doesn't talk to the dashboard widget.

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • R
                        rocketdog
                        last edited by

                        @stephenw10:

                        The thermal sensors dashboard widget (I assume that's what you mean?) relies on the sensor selection in System: Advanced: Miscellaneous:. Since the SX280 is pre-Core architecture it can only use ACPI to read the CPU temperature which relies on Dell having written a bios that passes that info to a non Windows OS.
                        If you just want to know what the CPU temp is you can probably use the mbmon FreeBSD package to read it but it doesn't talk to the dashboard widget.

                        Steve

                        Excatly. After a lot of testing, I've come to realize that neither the ACPI-thing nore mbmon works.

                        [2.1-RELEASE][admin@firewall.ninya.org]/root(4): mbmon
                        ioctl(smb0:open): No such file or directory
                        No Hardware Monitor found!!
                        InitMBInfo: Bad file descriptor
                        
                        
                        1 Reply Last reply Reply Quote 0
                        • R
                          rocketdog
                          last edited by

                          I'm not sure what wrong, but suddenly my FW starts to act like a monkey. It loses all connection to my gateway, and the only solution is, as topis say, reboot. 'dmesg' gives nothing. Anyone got a clue? This is really frustrating since I'm running TOR, http, mumble etc.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            So you can still access the webgui? And can you, like previously, still ping the gateway?

                            What is the gateway? Is the pfSense box behind another router or does it have a public IP on WAN? How is it connected?

                            You need to methodically go through and identify exactly which part of the connection is failing. What you can ping and what you can't. Is DNS working? Does the routing table look reasonable?

                            It's interesting that neither ACPI or mbmon work with that box. There must be a few people running identical hardware since they are so common. There will at least be people running FreeBSD on it. Do you have the most recent bios?

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • R
                              rocketdog
                              last edited by

                              Yeah, I can access the webGui. The GW is down, cannot be pinged (red-flagged @ webGui) etc. DNS:es can't be reached..

                              I have a static ip, static GW, and the FW is connected directly to the "wall-jack".

                              Not sure about the BIOS, but could take a look..Been thinking about things getting overheated, but then why would just the GW drop?
                              The box seems no the have any support for temp-support, so I have no idea about if it is a overheat-problem..

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Ok so the gateway device is some box at your ISP?
                                When the gateway is marked down there will be something in the system logs. Often it will report the reason for marking it down as either excessive packet loss or delay. If it does not it usually means the connection has gone down. Is the WAN interface still showing as UP?
                                It may be the remote box doesn't like being pinged continuously. You could try altering the ping interval (1s be default) or disabling apinger entirely in System: Routing: Gateways: (edit gateway - advanced section for apinger tuning).

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • D
                                  dreamslacker
                                  last edited by

                                  @rocketdog:

                                  Not sure about the BIOS, but could take a look..Been thinking about things getting overheated, but then why would just the GW drop?

                                  If you do a Dmesg after the GW drops, does it show the link flapping on the ue0 nic?

                                  If so, you either have a failing NIC or just general instability with the USB NIC (these aren't exactly what I would consider to be stable).

                                  If the System Logs do not show Apinger alarm, restarting the NIC and followed by a filter reload, then the problem probably lies with the NIC (I've had this with a failing NIC before).

                                  1 Reply Last reply Reply Quote 0
                                  • R
                                    rocketdog
                                    last edited by

                                    @dreamslacker:

                                    If you do a Dmesg after the GW drops, does it show the link flapping on the ue0 nic?

                                    If so, you either have a failing NIC or just general instability with the USB NIC (these aren't exactly what I would consider to be stable).

                                    If the System Logs do not show Apinger alarm, restarting the NIC and followed by a filter reload, then the problem probably lies with the NIC (I've had this with a failing NIC before).

                                    Yeah, tons of ups and downs. The FW has worked as a charm for the last few days…I tuned some stuff on a server (did some ifconfig eth0 RX downtune IIRC), and the TOR-server went down about 20%...Before, and when the FW-problems occured, the tor-relay was full throttle.. So I guess it's just this damn USB NIC. Too much traffic and it goes bananas..

                                    How do you reload filters?

                                    1 Reply Last reply Reply Quote 0
                                    • R
                                      rocketdog
                                      last edited by

                                      Looking at dmesg, I've lost connections several times…probably while I've not been using internet etc. And I have no idea for how long the ue0 is down, and why it comes back up again. Ideas?

                                      ukphy0: <generic ieee="" 802.3u="" media="" interface=""> PHY 16 on miibus1
                                      ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
                                      ue0: <usb ethernet=""> on axe0
                                      ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
                                                   Consider tuning vm.kmem_size and vm.kmem_size_max
                                                   in /boot/loader.conf.
                                      ZFS filesystem version 5
                                      ZFS storage pool version 28
                                      ue0: link state changed to DOWN
                                      bge0: link state changed to DOWN
                                      pflog0: promiscuous mode enabled
                                      ue0: link state changed to UP
                                      bge0: link state changed to UP
                                      ue0: link state changed to DOWN
                                      ue0: link state changed to UP
                                      ue0: link state changed to DOWN
                                      ue0: link state changed to UP
                                      ue0: promiscuous mode enabled
                                      ue0: link state changed to DOWN
                                      ue0: link state changed to UP
                                      ue0: link state changed to DOWN
                                      ue0: link state changed to UP
                                      ue0: link state changed to DOWN
                                      ue0: link state changed to UP
                                      ue0: link state changed to DOWN
                                      ue0: link state changed to UP</usb></generic>
                                      

                                      Found this! What could cause this? 1-5 minutes downtime, but no "uplink" messages?

                                      Edit: Missed to get these lines in the screenshot.

                                      Feb 10 19:35:41 	apinger: Starting Alarm Pinger, apinger(17013)
                                      Feb 10 19:35:51 	apinger: ALARM: WANGW(188.133.122.1) *** down ***
                                      Feb 10 21:20:37 	apinger: ALARM: GW_WAN(188.122.133.1) *** down ***
                                      Feb 11 00:39:54 	apinger: Starting Alarm Pinger, apinger(13674)
                                      Feb 11 00:40:05 	apinger: ALARM: WANGW(188.133.122.1) *** down ***
                                      Feb 11 03:03:19 	apinger: ALARM: GW_WAN(188.122.133.1) *** down ***
                                      Feb 11 03:31:54 	apinger: Starting Alarm Pinger, apinger(15720)
                                      Feb 11 03:32:04 	apinger: ALARM: WANGW(188.133.122.1) *** down ***
                                      Feb 13 00:17:28 	apinger: ALARM: GW_WAN(188.122.133.1) *** loss ***
                                      Feb 13 00:47:10 	apinger: alarm canceled: GW_WAN(188.122.133.1) *** loss ***
                                      

                                      "Starting Alarm Pinger", then 10 seconds later I'm offline. Where can I find options about this thingy?

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        How far apart are these up down events?
                                        Why is it using promiscuous mode? Is it bridged?

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • R
                                          rocketdog
                                          last edited by

                                          @stephenw10:

                                          How far apart are these up down events?
                                          Why is it using promiscuous mode? Is it bridged?

                                          Steve

                                          Promiscuous mode? I have no idea. I've never seen options like that. It is no bridged.

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Usually a NIC would only need to use promiscuous mode if it has to be able to process frames addressed to other MACs.  This is the case if it is part of a bridge or has been used for packet capturing among others.

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.