Pfense network problem



  • Hello

    I have the following devices:

    Pfsens Box (WAN, LAN1, LAN2, DMZ)
    Cisco Router 1712 (1 10/100 Ethernet, 4 integrated Switch Ports)
    Cisco Switch WS-C2960S-24TS-L
    4 PCs

    My connection

    PFsense WAN port  =======> Internet OK
    PFsense LAN1: ==========> Pfsenes Web GUI OK
    PFsense LAN2: ==========> Creating 4 VLANs OK

    How can connect Pfsense + Cisco 1712 + Cisco 2960 and How can I configure them so that I can achieve the following:

    1- Behind the firewall, 4 VLANs, 4 different network segment, and they can ping each other
    2- 4 PCs in the sub-net can ping the internet

    I appreciate so much if you can point me to some post where people doing similar thing

    Best Regards



  • Basically inter-LAN and inter-vLAN routing is done automatically. You only need to create rules to allow traffic. If you want those to go to the internet, then you need to make sure that outbound nat is working correctly also.