Pfsense with 3 NICS
-
But he stated this as well
"LAN 1 and LAN 2 are not attached to Physical NIC, "I if he even knows what he wants, I think it is getting lost in translation.. Maybe he would have better luck with someone that speaks his native language?
if i remove the physical NIC from vSwitch 1,
my Physical Machines in the office will be able to communicat with LAN 1 ( 192.168.4.1 ) even it doesn't have Physique NIC ?when you say remove the bridgen ? which one you mean?
on the interfaces there is no bridgen.
attached is a screenshot of my bridgen
-
if i remove the physical NIC from vSwitch 1, my Physical Machines in the office will be able to communicat with LAN 1 ( 192.168.4.1 ) even it doesn't have Physique NIC ?
No. You need a physical NIC on vSwitch1 to allow that. We just needed confirmation that was what you're trying to do.
on the interfaces there is no bridgen.
Ok, so you removed it already? In your much earlier out put of 'ifconfig' it showed a bridge.
Steve
-
"my Physical Machines in the office will be able to communicat with LAN 1 ( 192.168.4.1 ) even it doesn't have Physique NIC ?"
And these physical machines are on 192.168.4.0/24 or are they on the wan that your pfsense is connected too 192.168.2.0/24 I think?
-
Ah, very good question. Yes, you mentioed via WAN earlier, did you mean that?
Steve
-
"my Physical Machines in the office will be able to communicat with LAN 1 ( 192.168.4.1 ) even it doesn't have Physique NIC ?"
And these physical machines are on 192.168.4.0/24 or are they on the wan that your pfsense is connected too 192.168.2.0/24 I think?
the physical Machines are using PFsense as Gateway,
on the WAN side I have just the ESXI and the ISP Modem,
all other machines are connecting to the internet through the PFSENSE( Virtual or Physiques)
all my network is going through the Pfsense.Steve yes this exactly what I want :).
thank you so much
-
Well then are you working.. If you removed the bridge and have firewall rules correct, change your lan2 pfsense IP to be .1 vs .0 you should be up and running.
-
Well then are you working.. If you removed the bridge and have firewall rules correct, change your lan2 pfsense IP to be .1 vs .0 you should be up and running.
this what I did and it working thank you so much for your help.
to do this my PFSENSE LAN1 required a Physique NIC ? right
as showed on my screenshot the Vswitch 1 has attached Physique NIC.my question is , is it possible to have Pfsense ( I mean LAN1 ) accessible to the physique machines even Vswitch 1 doesn't have a Physique NIC ?
-
Only if those machines are somehow routed through the pfSense WAN with appropriate firewall and port forwarding rules.
No, is probably the answer. If you wish to have physical machines connected to LAN1 and using pfSense as their gateway to the internet you need to have a physical NIC connected to vSwitch1 to get that real traffic into the virtual network.Steve
-
If they are connected to LAN, then they will so long as the rules exist. They will be on LAN subnet and accessing LAN1 resources either by IP of configured DNS name. They have do go through pfSense as a route to get to LAN1 resources. There will not be a direct path.
-
John Steve, and all
thank you so much for your help and help me get to know the product.
really guys appreciate it.
I own you a drink guys :) -
I would say a couple of them, stiff ones!! Or some really good craft IPA's at a min. If you were in the area I would take you up on it, but since not take a look at my signature.
-
all who does helps in this topic,
i appreciate your effort and time to have a look at this with me,
Thank you so much guys !John i looked to your signature, will work on it this week.
-
So it all working as you expected?
Good to hear. :)I would say a couple of them, stiff ones!!
;)
Steve
-
So it all working as you expected?
Good to hear. :)I would say a couple of them, stiff ones!!
;)
Steve
everything was working fine, just want to understand how the system works.
really appreciate everyone took the time to answer my questions ! -
@bryan-paradis This is Funny and I know this is an old topic, but sometime ago I added a 5th Nic to my PFsense, it never worked. Added VMX that did not work either, today I tried again multiple times to no avail and stared over like 3 times. Then I decided to enable track interface and I got ipv6 and it worked I could ping tracert every thing for the first time my 5th Network card was operational, just not on ipv4. I am trying to setup a vlan for wifi in another location in the building. Well I followed your suggestion above even though the path was a little wrong but I fixed the Rule that was not auto created for some reason. Now I have the extra Vlan and the 5th network card working in a virtualized pfsense.
