Cannot telnet over network with pfsene
-
I have a network setup with devices that I have to telnet into. Its a simple /24 network and I know that PFsense is doing something to block port 23 or something because if I go to
System > Advanced > Firewall/NAT > Disable all packet filteringand put a check mark on this checkbox (and disable the firewall) I can telnet just fine. Again I am only telnetting to devices in my network which is all with a /24 network
Trying to telnet from 192.168.0.5 > 192.168.0.25. It works fine with firewall disabled. I am not aware and cant find the right info I need to fix this. Please help me out here thanks!
PS I know that telnetting isnt super secure but thats the only option these devices allow me to use and this is a very private network. Please let me know what to try, thanks!
-
You'd better send a crystal ball… Alternatively, post the firewall configuration screenshots after making sure you have NOT checked "Block private networks" in your LAN configuration.
P.S. There's also this wonderful Status - System Logs - Firewall thing that shows you what's blocked by what rule.
-
"Trying to telnet from 192.168.0.5 > 192.168.0.25"
And why would pfsense be involved in this traffic?? Are you bridging interfaces? WHY would be my first question ;)
Traffic on the same segment doesn't go through pfsense in a normal setup. Only if you were bridging interfaces could this happen.
As requested already - give us something to work with any be happy to help you. Lets see your firewall rules for starters..
