Kernel panic after about a week



  • I couldn't run bt since keyboard input didn't work, and it doesn't save the logs since I'm using a nanobsd build x64, 2.1

    Hardware: asus p45 deluxe board
    Nics: Marvell (not being used these were extremely buggy, they are built into the board, they are not assigned interfaces)
    HP dual nic pci express 4x, not sure which one. They are listed as bce1 and bce0
    CPU: q6600
    Memory passes memtest86
    On an 8 gigabyte usb stick

    Here's just a typed out version:

    
    kernel trap 12 with interrupts disabled
    
    Fatal trap 12: page fault while in kernel mode 
    cpuid = 2; apic id = 02
    fault virtual address = 0xfffffbff810a20d0
    fault code = supervisor write data, page not present 
    instruction pointer = 0x20:0xffffffff8065c642
    stack pointer = 0x28:0xffffff8246f519c0
    frame pointer = 0x28:0xffffffff810a1980
    code segment = base 0x0, limit 0xfffff, type0x1b
    DPL 0, pres 1, long 1, def32 0, gran 1
    processor eflags = resume, IOPL = 0
    current process = 22847 (awk)
    trap numer = 12
    panic: page fault
    cpuid =2
    
    

    edit: just saw this
    https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#Broadcom_bce.284.29_Cards

    I just added those changes for the broadcom adapters, hopefully it fixes the issue


Log in to reply