Replacing vendor xDSL router
-
Hi guys and welcome to me! ;D ;D ;D
i've the following scenario:
INTERNET <–---> Vendor Router xDSL (with 8 static IP) <-----> Internal Router <-----> Office LAN
Example of assigned IP addresses:
20.20.20.1/29
In my case, i checked that the vendor router has 20.20.20.6 and have assigned to my internal router WAN IP 20.20.20.1 and for my LAN IP 192.168.x.x
EVERYTHING IS WORKING PERFECT
now, I need to change my vendor router with a stupid xDSL modem/router in bridge mode + a dedicated hardware with pfsense on board.
I think to be able to configure this, but unlucky haven't pfsense here....
My question is now:
- configure one Ethernet NIC as my WAN IP (20.20.20.6)
- configure another Ethernet NIC as my LAN IP (20.20.20.1/29)
BUT, what if i shoulda configure a third NIC exactly like the second one?
OK, WILL MAKE IT EASY.
think one like this:

In the LAN ports, now I have every 20.20.20.1/29 IP and i can plug a cable whatever I want. In Pfsense, how can I configurate them?
THX guys!!!
-
P.S. in real, no LAN with 20.x.x.x… they're WAN and NAT is disabled ;)
-
sorry guys again…... I'm watching some youtube videos, and I think that in my case i shoulda use "interface groups"
tomorrow i will try at office
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy