Allow traffic between subnets OpenVPN
-

I want to be able to allow traffic between these subnets.
But i think there is something i have to do for the routing to work.(other than adding firewall roules?)
Manual Outbound NAT rule generationAlbum:
http://imgur.com/a/4ZVfHAs you can se, the "Testlan" interface is beeing routed via the VPN gateway,
Summary:
I want be able to reach the machines in the 192.168.0.1/24 from the 192.168.1.1/24 subnet, while the clients in the "Testlan" interface is beeing routed via the VPN. -
Not sure about the exact config here. But in any case, you need to add ordinary pass rules to pass the traffic that is NOT to be "policy-routed" out a gateway to the internet. Those rules go above the policy-routing rules you already have:
On LAN, Pass source LANnet destination TESTLANnet
On TESTLAN, Pass source TESTLANnet destination LANnet -
Thanks:!
I did the same thing before, just that i haven't moved the roules to the top!Regards.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy