Usb to ethernet AX88772

salida

i updated to 2.2, usb to ethernet doesnt get recognized as ue0
i get this errorskernel: ugen1.2: <vendor 0x0b95=""> at usbus1 (disconnected)</vendor>and ```
[ There were error(s) loading the rules: pfctl: DIOCADDRULE: Operation not supported by device - The line in question reads [0]: ]

PhilipG

I believe more recent builds are missing a number of kernel modules / drivers; I have referenced this post and two other posts I believe to be related in my post:-
Topic: Missing cdce kernel module
https://forum.pfsense.org/index.php?topic=74664.0

It seems you might be missing the axe kernel module

What snapshot version / date of 2.2 did you update to? That might help others sort things out.

salida

@PhilipG:

What snapshot version / date of 2.2 did you update to? That might help others sort things out.

pfSense-Full-Update-2.2-ALPHA-i386-20140404-0651

eri--

Try with the tomorrow snapshots should be fixed.

Raul Ramos

Hi

Are this USB's NICs OK for pfsense?

Thanks

eri--

Only testing will tell in general.
First though you have to check if they are supported on FreeBSD 10.

salida

@ermal:

Try with the tomorrow snapshots should be fixed.

Hey there again i tried both

pfSense-memstick-2.2-ALPHA-i386-20140409-0901
pfSense-memstick-2.2-ALPHA-i386-20140408-0719

usb to ethernet adapter does not get recognized :(

pubmsu

Hi,

In our case, our USB to ethernet NICs used to work with pfSense 2.1.x. But currently, on 2.2 alpha, a message says that these are not ALTQ compatible (and hence traffic shaper can't be used) even though we're only using interfaces based on VLAN on top of LAGG (which, as I understand, virtualizes and abstracts the underlying hardware).

Please address this by including the required drivers as they were in 2.1.x and 2.0.x.

Thanks,
msu

eri--

You have to do more than that and tell us which drivers!!!