WAN site access to Internet through LOCAL pfsense?



  • Hi guys I have a remote site connected via our service providers WAN service which I am wanting to give access to our internet through. The remote site IP range is 192.168.10.0/24 and I am using a OpenWRT wifi access point with IP of 192.168.10.100, gateway of 192.168.10.1 and DNS of 192.168.0.5.

    The providers routers (cisco which I do not have access to configure) are 192.168.10.1 and 192.168.0.1 for connecting our branches. Our Local internet router is 192.168.0.5 and is running pfsense.

    Somehow I need traffic from devices connected via wifi to the 192.168.10.100 to route through to 192.168.0.5 and then onto the internet. From the router web interface 192.168.10.100 I can ping through to the 192.168.0.0/24 network fine yet when I try to ping any website address it gets as far as 192.168.10.1 then stops. It does resolve the DNs to IP Address correctly though from 192.168.0.5 (pfsense).

    I tried adding static routes to the OpenWRT 192.168.10.100 as follows:

    • dest: 192.168.0.0/255.255.255.0 gateway: 192.168.10.1
    • dest: 0.0.0.0/0.0.0.0 gateway: 192.168.0.5

    I hope that made some sense and someone can give me a few ideas. Thanks in advance.



  • Anyone? Still trying to figure this one out. Thanks.