X10SBA-L Temperature sensor
-
I have just setup a new X10SBA-L running x64 full install, everything seems to be working well, however the onboard temp sensors seems stuck at 26.8c, its been like this for the past 2 days! Rebooting does't seem to change it.
sysctl -a | grep "dev.cpu.*.temperature" returns nothing.
[2.1.2-RELEASE][root@gateway.XXX.local]/root(3): sysctl hw.acpi.thermal
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 26.8C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 85.0C
hw.acpi.thermal.tz0._HOT: 85.0C
hw.acpi.thermal.tz0._CRT: 90.0C
hw.acpi.thermal.tz0._ACx: 50.0C -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: 1
hw.acpi.thermal.tz0._TC2: 5
hw.acpi.thermal.tz0._TSP: 50Is this a support issue with *BSD and this motherboard? Here's a link to the manufacture: http://www.supermicro.co.uk/products/motherboard/celeron/X10/X10SBA-L.cfm
-
What setting are you using for your temp sensors? Check System > Advanced > Misc. It should be the "Intel Core" option.
-
Thanks thats added the individual core temps from the J1900 but the sensor which I guess is on the motherboard remains at 26.8c:
-
Thanks thats added the individual core temps from the J1900 but the sensor which I guess is on the motherboard remains at 26.8c:
Maybe that sensor actually is 26.8C. Many motherboards have an ambient air ("case") sensor which is far away from the CPU and other heat-generating components.
-
I don't think that's the case as the room temperature is fluctuating a good 5c or more. And the case has a small 40mm fan to remove heat.
-
I know this is a couple months back, but just wanted to chime in:
I bought a Supermicro motherboard a while back for a FreeNAS build, and it ended up having a bad temp sensor on it (the CPU fan would be at max RPMs all the time). You can check the temperatures in BIOS to better see if it is a problem with the sensor itself or with the mobo interfacing with pfSense. Just a thought.
I ended up RMA-ing the mobo and getting a new one. The temp sensor works fine on the second one :)
-
I know this is a couple months back, but just wanted to chime in:
I bought a Supermicro motherboard a while back for a FreeNAS build, and it ended up having a bad temp sensor on it (the CPU fan would be at max RPMs all the time). You can check the temperatures in BIOS to better see if it is a problem with the sensor itself or with the mobo interfacing with pfSense. Just a thought.
I ended up RMA-ing the mobo and getting a new one. The temp sensor works fine on the second one :)
Hi
so temp problem could be because of a defective motherboard?