Ping to Virtual IP from Internet?
If I Set a Virtual IP and add new firewall rule to permit in wan interface protocol icmp to pass.
Can i ping that Virtual IP from Internet? ???
That depends on the type of VIP. You can ping a CARP IP directly. If you choose PROXY ARP you need to redirect the ICMP protocol to another machine that then can respond the ping. Same for type OTHER. If you use PROXY ARP or OTHER make sure you then allow ICMP to the redirected machine, not the public VIP. First NAT is processed, then firewallrules are applied!
I undertand you, but let me explain my PF settings.
VIP(Other or Proxy ARP)=220.127.116.11/32
Setting In Nat:1.1
External IP: 18.104.22.168/32
Internal IP: 192.168.10.158/32
In Firewall Rule
Just One Rule:
I cant ping 22.214.171.124 from Internet. if you like, can log in into my PFSense at 126.96.36.199 to see. :)
Come to the IRC channel at freenode ##pfsense and I might have a look at your setup.
now i'm in IRC.
But where are you? :'(
I'm usually there during central european evening and night times. I'm online atm.
now i'm in IRC.
But where are you? :'(
I have same problem too.
WAN Interface: 188.8.131.52/29
LAN Interface: 172.16.4.252/16
VIP: 184.108.40.206 (Other)
External IP: 220.127.116.11/32
Internal IP: 172.16.4.16/32
NAT Advanced Outbound
Source Port: *
Destination Port: *
NAT Address: *
NAT Port: *
Static Port: NO
Source: LAN net
Destination: WAN address
I'm using pfSense BETA2.
Still stuck with incoming connection from internet to my selected LAN.
My server located in the LAN, not DMZ.
I only able to open ICMP and SSH in the pfSense it self.
Add another Rules WAN:
And still won't able to ping to 172.16.4.16 from internet.
What do you need the advanced outbound NAT for? 1:1 nat takes care of natting the inside IP to the right external one. Also your outbound NAT rule is wrong as it doesn't have a "map to IP" specified (is that assignable this way anyway?).
- Disable advanced outbound nat again.
- Change your rule at WAN to have the internal IP of your client (172.16.4.16) (NAT is first processed and after that firewall rules are applied!)
If it doesn't work with VIP "other" use "proxy arp" or "CARP" instead (your provider then most likely needs some kind of Layer2 reply).
Disable advance outbound NAT
Recreate NAT 1:1
Recreate Rules at WAN
And still won't able to ping the VIP address.
Is there something wrong with my rules? ???
Well, I can Ping your VIP:
PING 18.104.22.168 (22.214.171.124): 56 data bytes
64 bytes from 126.96.36.199: icmp_seq=0 ttl=44 time=370.610 ms
64 bytes from 188.8.131.52: icmp_seq=1 ttl=44 time=348.927 ms
64 bytes from 184.108.40.206: icmp_seq=2 ttl=44 time=355.200 ms
–- 220.127.116.11 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 348.927/358.246/370.610/9.110 ms
sorry… the real 18.104.22.168 is my existing linux with iptables.
but i'm trying pfsense beta 2 in my lab with the real IP too, so i can switch that linux/iptables with pfsense if it's work.
right now i'm using 4 machine for testing:
two as internal with IP 172.16.4.16 and 172.16.4.74
one for pfsense with LAN 172.16.4.252, WAN 22.214.171.124 (GW 126.96.36.199), VIP 188.8.131.52
the last for external with 184.108.40.206
i just reset pfsense to factory default and recreate again the whole config.
but still won't able to ping VIP from external. I only able to ping WAN interface from external.
all trafic from internal to external works fine.
btw, my pfsense mobo is GA-K8NSNXP-939 with 2 RJ45 onboard, one with NVidia Ethernet (nve0) and the other with Marvell 8801 Gigabit Ethernet (pfsense didn't detect this chip) and 4 additional Linksys (pfsense probe as dc0, dc1, dc2, dc3).
Finally… after testing on three motherboard, I can do ping and port forwarding from external to internal machine.
The main problem is in the default gateway of the internal machine. I forgot to add additional gw in the server routing table. ;D ;D ;D
I will switch to pfSense immediately... thanks guys... ;) ;) ;)