BTX halted error after upgrade attempt

  • Hello all…
    Yesterday I try to auto update from ver 2.1.1 to 2.1.3 using web gui. After 1 hr box didnot restarted so I check via VGA notice box was stuck at BTX halted error!! then able to boot from F2 option (nanobsd) from try to reset default but boot F1 always stuck at BTX halted error...please help what to do?? need help to bring back to full install....thanks in advance...

    Box Info:
    Supermicro PDSMI+

    Intel Pentium Dual CoreP4 2.80GHz

    4 GB DDR2 RAM

    250GB SATA HDD 7200rpm - plenty of room for packages

    4 (four) INTEL Gigabit ethernet ports

    2 USB, 1 VGA, 1 console, keyboard port, mouse port.

    Pfsense (Full Version) is installed on a 250GB Sata drive.

    Compact Flash (512mb) failover / backup cf card with pfsense embedded.

  • here dashboard pic…250 gb hd change to 2 gb! had full install change to nano BSD!

  • BIOS Boot Pic

    ![Bios Boot1.png](/public/imported_attachments/1/Bios Boot1.png)
    ![Bios Boot1.png_thumb](/public/imported_attachments/1/Bios Boot1.png_thumb)

  • sys log pic

    ![System Log.PNG](/public/imported_attachments/1/System Log.PNG)
    ![System Log.PNG_thumb](/public/imported_attachments/1/System Log.PNG_thumb)

  • sys log

    ![System Log1.PNG](/public/imported_attachments/1/System Log1.PNG)
    ![System Log1.PNG_thumb](/public/imported_attachments/1/System Log1.PNG_thumb)

  • boot

    ![pf Boot Selection1.jpg](/public/imported_attachments/1/pf Boot Selection1.jpg)
    ![pf Boot Selection1.jpg_thumb](/public/imported_attachments/1/pf Boot Selection1.jpg_thumb)

  • Box

    ![Super Micro Box1.jpg](/public/imported_attachments/1/Super Micro Box1.jpg)
    ![Super Micro Box1.jpg_thumb](/public/imported_attachments/1/Super Micro Box1.jpg_thumb)

  • any one can help please  :(

Log in to reply