Squid will not work at all
-
So ever since an update in April, I have been unable to successfully use Squid or Squid3. It used to work and now it hasn't and I cannot find a way to solve this issue. So what I see under services is that Squid has stopped. It isn't activated. Now if I try to dabble with the settings and attempt to change it or activate it, I cannot connect to anything and it quickly stops the service. If it does work, then I have the "The requested URL could not be retrieved" error. I have tried reinstalls, restarts and just about everything I can think of.
PC specs.
AMD FX Quad core 2.6GHz
6GB DDR3 RAM
ASRock motherboard
250GB HDD
600 Watt PSU (Used to be a gaming PC)Squid settings
Proxy Interface: LAN
Allow users on interface: Y
Transparent proxy: Y
Bypass proxy for Private Address Space (RFC 1918) destination: N
Bypass proxy for these source IPs: Blank
Bypass proxy for these destination IPs: Blank
Enable logging: N (Used to be Y)
Proxy port: 3128
ICP port: Blank
Language: English
Disable X-Forward: N
Disable VIA: N
What to do with requests that have whitespace characters in the URI: Allow (Used to be Strip)
Use alternate DNS-servers for the proxy-server: Blank
Suppress Squid Version: N
Custom Options: Blank
Cache Management:
Hard disk cache size: 5000
Hard disk cache system: ufs
Hard disk cache location: /var/squid/cache
Memory cache size: 1024
Minimum object size: 0
Maximum object size: 1024
Maximum object size in RAM: 1024
Level 1 subdirectories: 32
Memory replacement policy: Heap LFUDA
Cache replacement policy: Heap LFUDA
Low-water-mark in %: 90
High-water-mark in %: 95
Do not cache: Blank (Used to have Speed Test)
Enable offline mode: Y (Used to be N)
Access Control:Allowed subnets: 192.168.1.1/24
Is there anything I am missing? I have tried everything all the way to reinstalling PfSense.
-
Do you have a backup you can try to restore from?
System -> Firmware -> Restore Full Backup
or
Diagnostics -> Backup/Restore