Successful Install on Watchguard Firebox X700!

stephenw10

My X-peak uses about 37W (idle) with an underclocked processor.

Steve

subfire91

i found a driver in realteks website regarding the RTL8139+ found on x700s

im posting a RS link to driver. Can anyone test and see if watchdog errors are resolved??

http://rapidshare.com/files/423085904/uw-8139_220_.zip

stephenw10

That isn't a BSD driver and it's actually dated 2005!
I don't think it's going to help. :(

Steve

sevilla

I recently put pfsense 1.2.3 on x1250e and all works very well. I want use this system as a bridge filter. Im using the devices msk0 and msk1 (port 4 and 5) as bridge and let the port 1 and 2 as WAN/LAN. I enable a firewall rule to permit all, but isnt not forwarding nothing from one port to another.

Anyone are using bridge mode on pfsense 1.2.3?

wallabybob

@sevilla:

Anyone are using bridge mode on pfsense 1.2.3?

I have a wireless NIC bridged to LAN and it works very well.

I don't understand your configuration. You have msk0 bridged to msk1?, msk0 bridged to LAN?
What is connected externally to msk0 and msk1?

Firewall rules apply on the input side of an interface so saying you have a firewall rule to permit all doesn't really provide enough information to be useful.

It would probably help if you explained what you want to do. A configuration diagram would help that explanation.

This discussion probably belongs in a new topic.

3molo

Hi,

Just bought an x700 off ebay. I booted the pfsense live cd on a vmware fusion guest, with a 2GB CF card in a usb reader. Installation was successful, tried first without boot loader and second time with boot loader.

Trying to boot the CF card on a laptop, but after mountroot> prompt I get uptime - then automatic reboot.
Here's the terminal:

panic: Root mount failed, startup aborted.
cpuid = 0
uptime: 11s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort
–> Press a key on the console to reboot,
--> or switch off the system now

What might be the problem here? Someone suggested editing /etc/fstab, wouldnt I need to edit the equivalence of Linux/GRUB menu.lst?

Looking at the data, /etc/fstabs root filesystem was ad1s01, on the firebox it's likely to be ad0s1a? And this is probably why the laptop won't boot it, cause it has a hdd and cd so the CF is more likely ad2 there?

stephenw10

Why not just download the embedded image and write it to the compact flash card?

http://doc.pfsense.org/index.php/HOWTO_Install_pfSense#Embedded_.28Compact_Flash.29_Installation

Steve

Edit: I may have misunderstood your problem here. ;)

ng12345

Appreciate all the information on this; I just bought an x700 to try and hack pfsense onto it.

When I turn the firewall on, the red and orange lights stay on constantly and there is a bar of black boxes on the top line of the lcd.

it never reaches the booting stage. i tried with the original CF card and the pfsense formatted laptop drive

is my firewall fried?

stephenw10

The orange, power, led and the red, unarmed, led stay on thats correct. The unarmed led is supposed to turn green when the system has booted correctly with the original OS. No one has ever figured out the correct command for bsd so pfsense doesn't do that, yet!
The lcd is written by the bios during boot so if it's only showing bars that's not good.
Try clearing the CMOS.

Steve

Edit: I figured out the arm/disarm led! ;D Check it out here.

ng12345

thanks for the input.

i popped out the cmos battery for 30s-1min and then stuck it back in.

when i power on the 10 and 100 lights flash green for a millisecond on the last port, the red and orange ones turn on and it stays with the black bars

does it need an ethernet connection to post?

any other way to clear the cmos? is there a cmos reset pin?

stephenw10

I don't actually have one of these to hand anymore and my memory is a little vague. ::)
I think that the ethernet port leds are driven directly such that they should light to indicate a link even of the board hasn't posted. Try connecting a PC or a switch, at least then you'd know if the board is powering up at all.
Have you tested the cmos battery? Usually after a reset the board will automatically boot into the bios so you can set it up. Without a pci graphics card or console redirection you wouldn't know that is happening. If the battery is flat it will do that on every boot!
It could be just the screen that's broken. It could be a faulty PSU (only one rail). Try swapping it for a standard atx if you have one.
If the battery is good then I'd try re-seating all the components including the cpu. The board requires the cpu and some ram to post.

Steve

jonnytabpni

Folks,

I've been following this large thread for quite some time now. I have a few posts a few pages back, where I commented on the fact that I aquired one of these boxes and tried pfsense. Of course, I got the timeout errors.

Today, I decided to try again with the latest 2.0 build (1/1/11). Low and behold, no timeouts!! The box has had an uptime of 9 hours with 4 ports (interfaces) configured as well as 3 or 4 IPSEC tunnels. It's also being used in production with no timeouts showing in system.log. The only issue I had was that I needed to remove the crypto card for IPSEC traffic to pass. No idea why, however I'm not too bothered as 1.2Ghz is plenty for me.

Have the watchdog timeouts been fixed, and are these cheap boxes excellent little pfsense gems?

stephenw10

@jonnytabpni:

Have the watchdog timeouts been fixed, and are these cheap boxes excellent little pfsense gems?

If that's true then it's great news. However I wouldn't get your hopes up just yet. Reading back through this and other threads on this issue, people have seemingly solved the timeout problem before only for it to come back after some time.
Have there been any changes to the re driver recently?

Steve

iFloris

@stephenw10:

If that's true then it's great news. However I wouldn't get your hopes up just yet. Reading back through this and other threads on this issue, people have seemingly solved the timeout problem before only for it to come back after some time.
Have there been any changes to the re driver recently?
Steve

There have not been changes to the driver, but rather in the way that pfsense 2.0 works.
By disabling device polling, hardware checksum offload, hardware tcp segmentation offload and hardware large receive offload, as well as changing the system tunables net.inet.tcp.tso and hw.bce.tso_enable to 0, watchdog timeouts are a thing of the past.

Except for one situation: When accessing the webgui on a macbook pro over a 2.4ghz wirelss N connection coming from a first generation Apple time capsule, timeouts are thrown up.
Attempts to replicate this through other wireless base stations, different connections and different devices have failed, which leads me to believe that this is a different issue entirely.
That laptop is never used for accessing the webgui, so it is irrelevant to me.

As usual, ymmv of course.

Edit: typo, shuffle sections

jonnytabpni

@iFloris:

There have not been changes to the driver, but rather in the way that pfsense 2.0 works.
By disabling device polling, hardware checksum offload, hardware tcp segmentation offload and hardware large receive offload, as well as changing the system tunables net.inet.tcp.tso and hw.bce.tso_enable to 0, watchdog timeouts are a thing of the past.

Are you saying that these things are changed by default? I haven't touched any of those settings.

BTW, I don't have access to the serial console. If timeouts were being thrown, where would I see them? In system.log?

I've had the traffic graph up all night and no matter what I do, I have yet to see one timeout with this build. Even Windows CIFS transfers work between interfaces

iFloris

@jonnytabpni:

Are you saying that these things are changed by default? I haven't touched any of those settings.

BTW, I don't have access to the serial console. If timeouts were being thrown, where would I see them? In system.log?

A few settings have been changed by default, but I changed them all manually a while ago, just to be sure.
Timeouts are seen in console, system.log and felt by having a non-responsive internet connection / webgui.

jonnytabpni

Which build are you running?

iFloris

@jonnytabpni:

Which build are you running?

At the moment, my pfsense version is 2.0-BETA5 (i386) built on Sat Jan 1 17:53:01 EST 2.
I usually update once a week on saturday.

jonnytabpni

@iFloris:

At the moment, my pfsense version is 2.0-BETA5 (i386) built on Sat Jan 1 17:53:01 EST 2.
I usually update once a week on saturday.

Im not far from you:
2.0-BETA5 (i386) built on Sat Jan 1 19:56:40 EST 2011

Have you seen timeouts at all with this current build?

iFloris

@jonnytabpni:

Im not far from you:
2.0-BETA5 (i386) built on Sat Jan 1 19:56:40 EST 2011

Have you seen timeouts at all with this current build?

No.

In fact, I haven't seen any timeouts whatsoever using any 2.0b4 build (ignoring an odd issue with a macbook pro) since this post:
http://forum.pfsense.org/index.php/topic,25870.msg147085.html#msg147085