Successful Install on Watchguard Firebox X700!
-
That's really interesting. There are always people asking what throughput different hardware is capable of, at last here's some numbers! :)
Watchguards specs are here: http://www.watchguard.com/products/x2500.asp
You have to look at the top X-Core model as all ther others are software restricted.
You've inspired me to do some testing. However to do this I'd have to swapout my box as my wan connection is only ~10Mbps. Would a test between two of the other ports be equivalent? I can't see why not they are still firewalled.
Then I'm possibly up against streaming a file at a sufficient speed. There must be a software package for doing this that doesn't rely on disk speed anyone recommend anything?Steve
-
So here is my dreaded post. I finally managed to make my x700 timeout :(
It happens when I VNC from my LAN (re2 in my case) to a server on the other side of an IPSEC tunnel.
Does anyone have any clues on what I can try to do to fix this?
-
Oh no! >:(
Can't help with that I'm afraid. You might want to check that VNC isn't sending some crazy packet size or using an odd protocol.
I have ended up using ttcp for network speed testing seems a useful package. Easy to install it to pfsense, pkg_add -r ttcp, but also windows and linux versions and all seem compatible.
I'm pretty impressed that iFloris managed 98.4Mbps from a 100M interface using a suposedly bad NIC chip. I'm only getting around 85Mbps. -
It happens when I VNC from my LAN (re2 in my case) to a server on the other side of an IPSEC tunnel.
Does anyone have any clues on what I can try to do to fix this?
What I've found is that the firebox nics are very sensitive to mtu sizes.
Make sure that you are sending regular sized, e.g. 1500 byte packages as opposed to irregular sized 1501 byte packages or something of that ilk.If that doesn't help, lay off the IPSEC and switch to OpenVPN, which, in my usage (road warrior setup) hasn't caused a timeout yet.
I'm pretty impressed that iFloris managed 98.4Mbps from a 100M interface using a suposedly bad NIC chip. I'm only getting around 85Mbps.
If you like, I can do some additional tests, but I download a few files at that speed nearly every day.
I actually have two fireboxes, originally an x500 and the x700 currently in use.
Since I did something stupid yesterday I switched out the disk drive to the x500 and the speeds remain the same, so my speeds aren't a fluke/oddity.
It'll be interesting to see if my original measurements of being able to firewall 100/100 hold up since I'm upgrading / crossgrading my home office 120/10 docsis 3.0 connection to a 100/100 fiber connection in a month or two.
When that change is complete I'll be able to test more completely for what I think (or hope) is full duplex linespeed capability. -
What I've found is that the firebox nics are very sensitive to mtu sizes.
Make sure that you are sending regular sized, e.g. 1500 byte packages as opposed to irregular sized 1501 byte packages or something of that ilk.Any idea on how I can change the MTU size of the VNC packets? Or force it VPN wide?
-
If it's an MTU problem try pinging through your vpn tunnel with increasing packet size until you get timeouts.
ping -l 1480 -f (remote IP)The f option prevents the packet being fragmented, in Windows.
You could try capturing some packets in pfsense. I've never used that function so can't help you.What OS's are you running ?
-
All Linux, bar pfsense of course.
BTW, it's the LAN NIC on my side that times out
-
I bought today an X700 firebox, flashed latest nightly on a 4GB CF, and inserted on Firebox.
Firebox booted correctly into pfSense, followed the setup and assigned two NICs, and then continue booting until "Bootup complete" message, and beeper play pfSense ring. And nothing …. serial terminal don't respond, no welcome string, no main menu, no Control+C response, nothing ....
Only way is switching off the Firefox.
What I'm doing wrong ?
Edit: I already tried with differents nightlies, with equal results. Tried different NIC configurations, with LAN cables pluged and unplugged ... Nothing. Already tried the "hint.acpi.0.disabled=1". Nothing.
(sorry for my bad english)
Thanks!
-
I bought today an X700 firebox, flashed latest nightly on a 4GB CF, and inserted on Firebox.
Firebox booted correctly into pfSense, followed the setup and assigned two NICs, and then continue booting until "Bootup complete" message, and beeper play pfSense ring. And nothing …. serial terminal don't respond, no welcome string, no main menu, no Control+C response, nothing ....
Only way is switching off the Firefox.
What I'm doing wrong ?
Edit: I already tried with differents nightlies, with equal results. Tried different NIC configurations, with LAN cables pluged and unplugged ... Nothing. Already tried the "hint.acpi.0.disabled=1". Nothing.
(sorry for my bad english)
Thanks!
I have the same issue, but even tho the console was useless the webgui was up on the LAN port.
I have since taken a break from working on the Firebox, waiting on my 512 RAM, 1.4Gz Celeron and 4GB microdrive to arrive.
-
I bought today an X700 firebox, flashed latest nightly on a 4GB CF, and inserted on Firebox.
Firebox booted correctly into pfSense, followed the setup and assigned two NICs, and then continue booting until "Bootup complete" message, and beeper play pfSense ring. And nothing …. serial terminal don't respond, no welcome string, no main menu, no Control+C response, nothing ....
Only way is switching off the Firefox.
What I'm doing wrong ?
Edit: I already tried with differents nightlies, with equal results. Tried different NIC configurations, with LAN cables pluged and unplugged ... Nothing. Already tried the "hint.acpi.0.disabled=1". Nothing.
(sorry for my bad english)
Thanks!
I have the same issue, but even tho the console was useless the webgui was up on the LAN port.
I have since taken a break from working on the Firebox, waiting on my 512 RAM, 1.4Gz Celeron and 4GB microdrive to arrive.
But, it's the first run. I have no chance to assign an IP address to the LAN port. So, how can I access the webgui without an IP address ?
Edit: pfSense 1.2.3 works perfectly. So, problem is with 2.0-BETA5.
Thanks.
-
Interesting. What is the date on the snapshot you were using?
-
Interesting. What is the date on the snapshot you were using?
I've tried snapshots from 3 days ago until today, and same result. Then, tried one from December (random pick) and same result.
But, I've used 1.2.3 and it works. Then, used the webgui to upgrade to latest snapshot (pfSense-2.0-BETA5-4g-i386-20110113-2030-nanobsd-upgrade.img.gz) and WORKS! Now I have 2.0-BETA5, but only upgrading from a configured and working 1.2.3.
Any idea ?
-
I bought today an X700 firebox, flashed latest nightly on a 4GB CF, and inserted on Firebox.
Firebox booted correctly into pfSense, followed the setup and assigned two NICs, and then continue booting until "Bootup complete" message, and beeper play pfSense ring. And nothing …. serial terminal don't respond, no welcome string, no main menu, no Control+C response, nothing ....
Only way is switching off the Firefox.
What I'm doing wrong ?
Edit: I already tried with differents nightlies, with equal results. Tried different NIC configurations, with LAN cables pluged and unplugged ... Nothing. Already tried the "hint.acpi.0.disabled=1". Nothing.
(sorry for my bad english)
Thanks!
I have the same issue, but even tho the console was useless the webgui was up on the LAN port.
I have since taken a break from working on the Firebox, waiting on my 512 RAM, 1.4Gz Celeron and 4GB microdrive to arrive.
But, it's the first run. I have no chance to assign an IP address to the LAN port. So, how can I access the webgui without an IP address ?
Edit: pfSense 1.2.3 works perfectly. So, problem is with 2.0-BETA5.
Thanks.
Pretty sure as soon as LAN interface goes up after initial configuration it's already assigned 192.168.1.1 and is also starting to hand out DHCP leases.
-
So re seating the CPU got the firebox working!
Unfortunately, now when I try to run the laptop drive, it says boot error on the console. I tried connecting the laptop drive in both directions to the PATA cable. One way it says boot error, the other way i just get a blank screen on the lcd but nothing shows up in the terminal.
I am using a serial to USB adapter to try and connect to it on my laptop – do I need the special firebox console cable?
Thanks for your help.
-
So re seating the CPU got the firebox working!
Unfortunately, now when I try to run the laptop drive, it says boot error on the console. I tried connecting the laptop drive in both directions to the PATA cable. One way it says boot error, the other way i just get a blank screen on the lcd but nothing shows up in the terminal.
I am using a serial to USB adapter to try and connect to it on my laptop – do I need the special firebox console cable?
Thanks for your help.
No, it's a standard console cable.
The exact type is a DB9 Null Modem F/F Console Cable I believe.
-
This post and those following it explain what's happening:
http://forum.pfsense.org/index.php/topic,7458.msg84688/topicseen.html#msg84688Assuming you installed pfsense to the HD by booting from a cd in a laptop.
If you select full install then the serial console isn't enabled by default so you can't see any errors.
You need to boot up the HD in the laptop and then, in the webgui, enable the serial console.Steve
-
Hi Folks,
I thought I'd share my stress and success on getting pfsense running on an old Watchguard X700.
The box is using a 8GB CF card which has replaced the original 64Mb Watchguard CF Card. (That's got monowall on it now, but don't tell anyone on this forum!)Install was pretty straight forward - thanks to a Doug Mitchell - http://dougmitchell.us/?p=401
However where I had an absolutely nightmare was trying to create VPN's. I have three VPN's - one to work (Watchguard x750e firewall), one to home test network (Watchguard X5) and one for my wife (Draytek Vigor 2820 Firewall). Yes she gets her own network!
Although I got the VPN's up and running and all firewalls confirmed that the VPN's were indeed there, no end of playing around with firewall rules, examination of logs could produce any clue as to what the issue was.
Finally I had a thought; the Watchguard X firewalls have a VPN Accelerator…..I wonder....
Removed one VPN accelerator card (AV-SFB160) and switched back on. VPN's started pinging straight away.
Other mods; cut a hole above the CPU and put a 92mm fan above. The original CPU blower along with the three fans by the memory are just way too noisy!
Now everything is working a treat.
Lovin' pfsense - well done to everybody involved in such a great product.All the best,
BigF
-
Another convert! ;D
Shame you couldn't get the Safenet card working as really boosts the VPN throughput (allegedly).
What type of vpns are you using? Which Pfsense version are you using?
Using IPSEC the Safenet card should be used automatically but OpenVPN or pptp you need to enable it.
You have to be using an encyption that is supported by it also.Steve
Edit: Scrub that! I see your box didn't have the Safenet SafeXcel 1141. Odd. ???
-
What kind of hardware is in these things? CPU, memory, NIC model, etc?
-
See first posts in this thread for more detail but as standard….
1.2GHz Celeron (P3 core), 256MB, 6X Realtek NICs, Compact flash slot, mini-PCI slot (usually with SafeXcel 1141!).
All of that is upgradable, except the NICs unfortunately. :(Steve
Edit: Did I imagine it or has this thread been merged?
