Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Successful Install on Watchguard Firebox X700!

    Scheduled Pinned Locked Moved
    Hardware
    151
    690
    873.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      Nicklas
      last edited by

      @Krisstian:

      someone asked for pictures… this is an Firebox x700

      Krisstian, I notice you replaced the FANs, I would like to do that as well, could you please advise which fans you brought and where? Are you pleased with the result is the sound level dropped and nearly silent?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Given that Kristian hasn't posted since March and before that not sinse 2008 you may be waiting a while!  :P
        However there are a number of posts here about replacing the fans with quieter ones.
        Be careful replacing the main cpu fan. The original is a radial fan because the clearance to the top of the case is small. If you use a standard axial fan you may have to cut hole in the case to prevent it being mostly covered. Even if the case top fits it may not allow enough clearance to get sufficient airflow.

        Steve

        1 Reply Last reply Reply Quote 0
        • N
          Nicklas
          last edited by

          Thanks Steve :-)

          I found indeed 2 type of silent fans to replace the 3 fans on the back of my x700.

          A) Fractal Design FD 40mm  13.0 dba max. 4000rpm
          B) Scythe Mini Kaze            14.0 dba max. 3500rpm

          But the CPU FAN it blows it all to the back and no replacement found as yet for that one.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Well woc38 above said:

            replaced default CPU fan with a similar new Titan radial fan (TFD-B6015M12B) and used a Zalman Fan Mate 2 to control its speed and noise.

            Looks likely.
            You could just try a fan controller on the existing fan. What ever you do make sure you monitor the cpu temps.

            Steve

            1 Reply Last reply Reply Quote 0
            • W
              woc38
              last edited by

              @Nicklas:

              Krisstian, I notice you replaced the FANs, I would like to do that as well, could you please advise which fans you brought and where? Are you pleased with the result is the sound level dropped and nearly silent?

              I choose these fans:
              @woc38:

              • replaced default 3 case-fans with 3 Noiseblocker XM2 fans, used 2 Y-fan-cables and attached them to the fan2 connector on the motherboard
              • replaced default CPU fan with a similar new Titan radial fan (TFD-B6015M12B) and used a Zalman Fan Mate 2 to control its speed and noise.

              The 3 case-fans are fairly silent. The radial fan does give some noise, but less then the original one. With the Fan mate I can control the noise to a more acceptable level.
              It still makes noise though, I can't sleep next to this red machine… I installed mbmon (pkg_add -r mbmon) to monitor temperature and fanspeed.

              Some news about 2.0RC3

              • Today I upgraded to the current snapshot (2.0RC3(i386) built on Wed Aug 3 01:54:50 EDT 2011). Previous version was the snapshot from 2 aug.

              • After the reboot: Yes! I saw the first userland console output since long time: the console menu seems to work again

              • Sometimes it seems to hang (non-responsive). After a minute or so, the menu is rebuilding and back

              • For the first time since 2.0 I get Watchdog timeouts on the LAN interface. There is virtually no traffic: 1 laptop directly connected to the LAN port accessing the webinterface.

              I tried different install methods: 2.0RC3 nanobuilds on microdrives, 2.0RC3 on a harddisk with embedded, uni- or SMP kernels, 1.2.3 upgrades. Massive editing of /etc/ttys. The boot procedure and the pfSense startup is always visible through serial console. It always stopped after "bootup complete" (when the system is entering userland?).
              This is a HD full install with a uniproc. kernel. Until today there was no console output after the "Bootup complete" message.

              There is also a new problem: I can't assign interfaces anymore via the webinterface. I have 2 out of 6 interfaces enabled (WAN and LAN) and I want to add a 3th one (OPT1).
              After clicking interfaces - assign - plus-sign the webinterface reports with "Interface has been added" but there is no new interface in the list.
              I can add them without trouble through serial console or SSH and after that they are visible in the webinterface.
              This problem also existed in the snapshot from 2 aug.

              More of you have serial console output after upgrading to the latest snapshot?
              And what about assigning interfaces?

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Hmm, strange. There doesn't seem to be anything directly related to any of those things in the recent commits list: https://github.com/bsdperimeter/pfsense/commits/master

                Steve

                1 Reply Last reply Reply Quote 0
                • W
                  woc38
                  last edited by

                  Hmmm,

                  My joy didn't last for long… After rebooting a few times guess what... no serial console anymore (and no watchdog timeouts).
                  Seems like the re driver has some effect on the console... After a watchdog error, the console begins to respond (for a while).
                  Earlier I noticed that a SMART error also triggers the console for a short time.
                  And this X700 unit also suffers very slow halt times (except when the console is working, then it halts in good old 1.2.3 times).

                  Time for an other device... I read some things about the X750e series (and a-like). Are these units "problem free"?

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    @woc38:

                    I read some things about the X750e series (and a-like). Are these units "problem free"?

                    They have Marvell Gigabit interfaces. The four built in use the sk driver and work absolutely no problem. The X550e only has these.
                    The X750e and higher models have four additional interfaces on a plug in card that are supported by the msk driver.
                    Unfortunately the msk driver in FreeBSD 8.1 is buggy and can lock up. I've only experienced this when I was load testing the box.
                    The driver has since been patched so it will be fine in pfSense 2.1. The driver could be backported but it's beyond my skills.  ::)
                    The box has some nice features though and is very upgradable. Read through the thread for more.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • K
                      kolkjaer
                      last edited by

                      Not Sure I any off you can help…

                      I have a x700 with a 4GB Cf card where I have flashed pfSense-2.0-RC3-4g-i386-20110621-1821-nanobsd.img
                      But I can't seem to get it working.
                      I don't get any console output, only thing that it dose is to flash green in the arm/diarm LED.

                      Any ideas ?

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Any problems flashing it? Try using the 1GB or 2GB image instead, it will definitely fit on your 4GB card.

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • K
                          kolkjaer
                          last edited by

                          No the flashing went well.

                          I have in the mean time tryed with the org CF card, and it dose the same.
                          It has been working up to around midt last week, with both 1.2.3 and 2.0RC3
                          So looks like there is some thing worng with the box  :'(

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Test the CMOS battery. Re-seat the CPU and the RAM. Does the LCD show anyting at all?

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • K
                              kolkjaer
                              last edited by

                              Have tryed all 3 things.
                              No the LCD just light up.

                              1 Reply Last reply Reply Quote 0
                              • L
                                leefuji
                                last edited by

                                hi all!
                                I'm just getting into this pfsense/firebox thing and I'm really confused on which Image to use to load up pfsense on my Hitachi 40GB laptop drive which I will install in the x700. Can anyone point me to the right image I need or link.

                                ps. keep in mind its a clean install of the latest pfsense which I do believe is 2.0RC3 if 'im not mistaken.

                                Thanks  ;D
                                Lee

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  The latest version is the daily build from the snapshot server however 2.0r3 is probably fine unless you find a specific bug that needs fixing.

                                  On a hard drive you can use the full install version. The easiest way to do this is boot the install CD, built from the ISO image, in a laptop. Install to the hard drive and then transfer to the firebox. You will need to boot up the laptop into pfsense once in order to turn on serial console. When you first boot the image in the firebox it will probably fail to boot and you will have to manually enter the location of root.

                                  It's really much easier to use a CF card!  ;)

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • L
                                    leefuji
                                    last edited by

                                    @stephenw10,
                                    Cool didn't know about the Snapshot server link .. thanks for that. Sounds good I will download the ISO image file and follow the instructions as exaplained earlier in this post. Now if I wanted to go with the CF would I still use the ISO image or is there a different one that is recommended to be used with a CF card? I read something about an embedded edition but didn't get if that was something CF or HD specific.

                                    Thanks
                                    Lee

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      If you use a CF card you need to use the NanoBSD image (a special version of FreeBSD for embedded applications). You can find them on the snapshot server or the main download site. E.g. here: http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_RELENG_2_0/nanobsd/pfSense-2.0-RC3-1g-i386-20110905-0445-nanobsd.img.gz

                                      You need to write the image directly to the CF card with some appropriate software like physdiskwrite as described here: http://m0n0.ch/wall/physdiskwrite.php

                                      You can use any of the images that will fit on your card (1GB image on a 4GB card is fine) however manufacturers seem to continuously reduce the actual size of their cards so you may find the 4GB image doesn't fit on your 4GB card. Just use the 1GB image.  ;) There is almost no advantage to using a bigger image.

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • L
                                        leefuji
                                        last edited by

                                        @Steve,
                                        Thanks you very much. I will try to find me a cheap 2GB-4GB CF card. I do have 10+ laptop HD's sitting around but I prefer the CF solution to avoid any mechanical issues that might arise with those older beat up Laptop HD's  :D. I might need to kick up the Installed RAM on the x700 from factory 256MB to 512MB since the writes go towards the RAM instead of the CF as far my understanding goes from what I've read.

                                        Regards,
                                        Lee

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          The NanoBSD image has no swap, mounts the partitions noatime to prevent writes to the card when reading files and all logs are sent to ram. The CF card will not suffer from write failure with 256MB.

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • L
                                            leefuji
                                            last edited by

                                            Ok cool.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post