Native IPV6

Cybdex

Since i kinda feel i hijack the other thread i posted in, i started a new one "just for my problem".

My windows ipconfig has the following info (some are masked with xxx):

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . : home.net
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 00-11-22-33-44-55
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:4610:x:x::xxx(Preferred)
   Lease Obtained. . . . . . . . . . : 17\. juni 2014 19:08:13
   Lease Expires . . . . . . . . . . : 17\. juni 2014 20:08:12
   Link-local IPv6 Address . . . . . : fe80::f459:3a28:2f63:aa8c%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 85.165.xx.xx(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.252.0
   Lease Obtained. . . . . . . . . . : 17\. juni 2014 19:08:11
   Lease Expires . . . . . . . . . . : 17\. juni 2014 20:08:11
   Autoconfiguration IPv4 Address. . : 169.254.170.140(Tentative)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . : fe80::2a0:a50f:fc7a:8b00%10
                                       85.165.xx.xx
   DHCP Server . . . . . . . . . . . : 88.xx.xx.x
   DHCPv6 IAID . . . . . . . . . . . : 18455xxxx
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-xx-12-22-xx-8C-00-xx-15-xx-xx-xx

   DNS Servers . . . . . . . . . . . : 2001:4600:4:fff::53
                                       2001:4600:4:1fff::53
                                       130.67.15.198
                                       193.213.112.4
   Primary WINS Server . . . . . . . : 192.168.xx.xx
   NetBIOS over Tcpip. . . . . . . . : Enabled

If the attachment thing works, you can see the test from ipv6 test page.

In other words, ipv6 works as it should when my windows computer is directly connected to the fiber modem.

If i connect my pfsense box to the fiber modem as i should, and enable DHCP6 on my WAN interface, this is what it sais under "interfaces":

Status 	up
DHCP 	up  
MAC address 	00:11:33:55:12:12
IPv4 address 	85.166.xx.xx  
Subnet mask IPv4 	255.255.252.0
IPv6 Link Local 	fe80::202:1eff:fef2:8981%xl0  
IPv6 address 	2001:4610:x:x::xxx  
Subnet mask IPv6 	128
ISP DNS servers 	127.0.0.1
2001:4600:4:fff::53
2001:4600:4:1fff::53
8.8.8.8
2620:0:ccc::2

Basically it seems as it gets a WAN address right?

If i try to ping :

 ping6 ipv6.google.com
PING6(56=40+8+8 bytes) 2001:4610:x:x::xxx --> 2a00:1450:400f:801::1001
^C
--- ipv6.l.google.com ping6 statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss

I created a firewall rule to allow ipv6 "all-all" on WAN, and LAN just to be sure.

Where do i go from here?

C

IPV6.jpg_thumb

Cybdex

Right.. seemingly working when i did the following:

Put a notch on "Only request a IPv6 prefix, do not request a IPv6 address " on my WAN dhcp6 setting.

Also followed the other advice around and put LAN on "Track interface", added a WAN firewall rule to allow inbound source UDP 547, destination UDP 546

Internal clients get ipv6 address, and get 10/10 on the test-ipv6.com page.

Well.. guess every ISP is different perhaps?

C