[Solved]…...Live CD hangs/waits on configuring WAN interface
-
I have a fixed IP address so I suspect that PFsense is waiting for an answer from a DHCP server. How do I go about this?
Thanks
-
Just wait until the DHCP times out.
-
Yes I did! I took some time though :-)
-
I still have the same problem with 1.2 RC4 LiveCD. Even after five minutes nothing happens. ???
With 1.2 RC2 LiveCD it takes some time - but it works. :o
I'm using two Intel PRO/100 Dual Port NICs. :P
Any ideas? Thanks in advance! :)
-
Upgrade to latest snapshot livecd.
-
@Michael:
I still have the same problem with 1.2 RC4 LiveCD. Even after five minutes nothing happens. ???
With 1.2 RC2 LiveCD it takes some time - but it works. :o
I'm using two Intel PRO/100 Dual Port NICs. :P
Any ideas? Thanks in advance! :)
I have this problem too with my ALIX 2c2, WRAP 2e or VIA EPIA VE5000, I use last 1.2 RC4 LiveCD (but I try embedded image too) boot is always hang when configuring WAN (my difference from Michaels configuration is Atheros based WLAN MINI PCI CARD ) :(
When I configure vr0 or sis0 as WAN interface, then booting without problem but i need ath0 as WAN …
Any other ideas ?
-
Same as I said before. Grab the latest version from the snapshots.pfsense.org server.
-
I get it and it working well …
Thanks
-
In my case timeout timed me out. So I installed again, with no wired NICs. Then timeout seemed a lot faster.
Regards,
Bert
