Multiwan problem, with routing?

  • I have dsl connection and a wifi fail over to somewhere else, .. wifi uses vlan, so the routers interface has and the wifi has and added that as default gateway, .. for the interface that is.

    Now when I try to connect from to the internet from any computer in the network, it works fine. However when I set to use when wan is down it doesn't work, even when i add openvpn client to use that interface it doesn't connect however when i set the openvpn server ip as monitor ip for that gateway it can connect why is this.

    For some reason there's an routing issue and no it's not a firewall thing I've disabled the firwall even added allow all but it doesn't change anything.

    Why can the openvpn or any other connection only work when it's added as monitor IP

  • # ping
    PING ( 56 data bytes
    64 bytes from icmp_seq=0 ttl=47 time=51.797 ms
    64 bytes from icmp_seq=1 ttl=47 time=50.209 ms
    64 bytes from icmp_seq=2 ttl=47 time=55.771 ms
    64 bytes from icmp_seq=3 ttl=47 time=56.505 ms
    --- ping statistics ---
    4 packets transmitted, 4 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 50.209/53.570/56.505/2.641 ms
    # route get
       route to:
    destination: default
           mask: default
      interface: vr2_vlan20
          flags: <up,gateway,done,static>
     recvpipe  sendpipe  ssthresh  rtt,msec    mtu        weight    expire
           0         0         0         0      1500         1         0 
    # route get</up,gateway,done,static>

    redit the configuration now when the link is down it is able to get on the internet from the router only, .. could this be because i use wan ip's on my lan.

Log in to reply