NAT not working after update from 2.x.x to 2.1.4



  • Hi guys

    i am not shure if this is just happening to me, but after i did the update online from my previous 2.x version to 2.1.4 my NAT is going crazy

    all my ports and rules configured for my WAN inbound and outbound are not working

    when i reboot pfsense via the webconfigurator, it boots normally but all my ports on NAT stay blocked, i need then to edit one rule configuration on some nat port, then press SAVE, APPLY CHANGES and only after the NAT starts working and i start getting inbound connection on my wan and lan ports configured..

    this is really crazy and it was not happenning before the update, anyone else having this issue?

    i am also having another issue with my ipcountryblock wich was replaced by the pfblock app, i have setup accordingly to the manuals, and default country lists available on the tool, once i activate it it starts giving me tmp erros for the country lists.. like example above

    Any ideas on how to sort this issue?????????? any one else having the same issue after the update?

    ![error pfsense.jpg](/public/imported_attachments/1/error pfsense.jpg)
    ![error pfsense.jpg_thumb](/public/imported_attachments/1/error pfsense.jpg_thumb)



  • This can occur if the overall table entries exceeds the configured maximum table entries. pfBlocker uses some huge tables, so it will be required to increase this value.

    You can do this in System: Advanced: Firewall and NAT.