Multi-WAN Nat Problem

[apant]

Hello. I try 2.2 and I found out that on multi-wan configuration, NAT is not working on the interface that is not the default route. For example I have wan and opt1. I have some NATs on WAN and some on OPT1. If WAN is the default gw then OPT1's NATs are not working. If I set OPT1 as the default gw then WAN's NATs are not working.

I have exactly the same configuration at 2.1.4 and works great so there is no possibility to be a misconfiguration.

Thank you.