DHCP & Carp
-
Same config for LAN & OPT3 (except ip addresses of course):
DHCP on LAN works without problem with CARP/failover
DHCP on OPT4 does the following when CARP/failover is enabled:
3times:
dhcpd: DHCPREQUEST for 192.1.1.100 from xx:xx:xx:xx:xx:xx via em4: not responding (recovering)several times:
dhcpd: DHCPDISCOVER from xx:xx:xx:xx:xx:xx via em4: peer holds all free leasesError msg on both machines, without failover ip it works.
-
btw. dhcp leases for the lan segment sync to both fws, but the status puzzles me:
dhcp_lan (LAN) recover 2014/09/29 18:37:09 unknown-state 2014/09/29 18:37:09
dhcp_opt3 (GUESTS) recover 2014/09/29 18:37:09 unknown-state 2014/09/29 18:37:09except the timestamp same on both machines
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.