Firebox LCD Driver for LCDProc

stephenw10

Hmm, well that's the exact set of things that I would expect to cause a problem. Perhaps the bug has been fixed?
Anyway if it's not a problem I would reflash and use lcdd4 to be sure.

Steve

Edit: Doesn't seem to have been fixed, not deliberately anyway! http://redmine.pfsense.org/issues/1279

FJSchrankJr

@stephenw10:

Hmm, well that's the exact set of things that I would expect to cause a problem. Perhaps the bug has been fixed?
Anyway if it's not a problem I would reflash and use lcdd4 to be sure.

Steve

Edit: Doesn't seem to have been fixed, not deliberately anyway! http://redmine.pfsense.org/issues/1279

After all of my config experiments yesterday, I got the reflashing process down fast! no problem at all. Thanks for the help Steve and enjoy your weekend.

FJSchrankJr

@stephenw10:

Hmm, well that's the exact set of things that I would expect to cause a problem. Perhaps the bug has been fixed?
Anyway if it's not a problem I would reflash and use lcdd4 to be sure.

Steve

Edit: Doesn't seem to have been fixed, not deliberately anyway! http://redmine.pfsense.org/issues/1279

Slightly off topic a bit but do you know anything about the serial console menu not showing up on a watchguard. last message is "Bootup complete".

stephenw10

It seems to be an issue only with the X-Core, or at least I haven't had that problem with either the X-peak or X-e boxes. It may be a symptom of the file system being mounted incorrectly. It seemed to start showing up around the same time the lcdd3 script broke.

Steve

FJSchrankJr

@stephenw10:

It seems to be an issue only with the X-Core, or at least I haven't had that problem with either the X-peak or X-e boxes. It may be a symptom of the file system being mounted incorrectly. It seemed to start showing up around the same time the lcdd3 script broke.

Steve

That's what I am using the xcore. It seams as though the BIOS for the watchguard also has control of the LCD because I noticed without any CF card in there you can boot it and change the port speed from the LCD/keypad. Maybe something is conflicting, not sure will have to play around with it more but it's wierd that it works for the rest of the boot and stops at Bootup complete.

stephenw10

Hello Firebox users! :)
I am still working on getting the LCD driver into a proper pfSense package. It's proving to be far beyond my usual level of tinkering but it's all good fun.
Anyway as, jjgoessens said when he wrote it, there isn't enough memory in the LCD to hold all the special characters required for vertical graphs, big clock and the heartbeat graphic. His latest driver doesn't support the heatbeat as a result.
Personally I would rather see the heartbeat working as I don't use big clock or vertical graphs.
Is anybody out there actually using these features?

Steve

TaNk

when i try to install the tar package and give ./ command it say's permission denied . logged in via ssh as root

stephenw10

You mean when you try to run this?

./install-embed2.lcdd.sh

Seems odd. It usually untars with the correct permissions.
You can reset the permissions with:

chmod 0755 install-embed2.lcddd.sh

What version of pfSense are you using?

Steve

TaNk

Thanks for reply.

I'm runing 2.0 Rc3 its a full hd install on x700. when i try to do chmod it say's command not found?

stephenw10

Hmm, well that seems very weird.
I don't have a full install to test right now but I can't believe that there's no chmod in it. It's certainly present in the nanoBSD install of RC3.
Are you experiencing any other problems?
The script is intended for embedded installs and may cause a problem with mounting the filesystem RO on a full install. However as you haven't managed to run it yet it can't be that. ???

Steve

TaNk

Hey

just like to confirm that it work's with full HDD install aswell

this is what i did

$ chmod 0755 ./install-embed2.lcdd.sh
$ /usr/local/etc/rc.d/lcdd.sh

VOLA it works :)

Thanks again for your help …

xleox

Hello stephenw10,

thank you for lcdd4.tar, it work quit well on my Firebox X700.

It is possible to disable/enable/blink the "Arm/Disarm"-LED in the BIOS (permanent).

One think could be enhanced: to extend the lcd-driver to set the "Arm/Disarm"-LED to green on init and to red on exit.
I don't have the source code, but I think it should be simple and would be the icing on the cake.

xleox

stephenw10

It wasn't at all simple! ::)
Read the entire thread to discover just how not simple or go straight to this post to get the resulting program to set the led.

Steve

woc38

I'm currently in the proces of migrating to pfSense 2.0. I installed a full 2.0RC3 version on a HD and installed Steve's LCD and LED packages on a WG Firebox X700. Just like on 1.2.3 it looks like it is running fine. I once encounterd a problem with the LCD driver only displaying "LCDproc Server" but couldn't reproduce.

Today I booted my Firebox for configuring and directly after bootup the LCD is "locked up" (see picture).
Arrow up shows "next", down shows "prev", right does nothing, left enters the menu with: options, screens, test menu. There is no system data like uptime, mem usage etc.

version: 2.0-RC3 (i386) built on Sun Jul 24 19:17:15 EDT 2011
did not install the package LCDproc via packages, only Steve's tarball
Serial console shows a normal startup of the lcdd script


Starting CRON... done.
 Starting /usr/local/etc/rc.d/WGXepc.sh...done.
 Starting /usr/local/etc/rc.d/lcdd.sh...done.
Bootup complete

What is going on here? Strange thing is it doesn't happen every time I boot or reboot the firewall…
I have little knowledge of FreeBSD, but is it possible to restart the lcdd service via the terminal? How?

Thanks for your info and help!

lcd1.jpg_thumb

lcd2.jpg_thumb

stephenw10

LCDproc is in two parts. lcdd is the server half that talks to the screen. lcdprocc is the client that tells lcdd what to put on the screen. If you only have the server half running you get what you are seeing.
Got to the console and run 'top' you should see both lcdd and lcdproc:


[2.0-RC3][root@pfsense.fire.box]/root(1): top
last pid:  8157;  load averages:  0.01,  0.01,  0.00   up 35+01:07:41  15:50:32
44 processes:  1 running, 43 sleeping
CPU:  4.8% user,  0.0% nice,  0.0% system,  0.0% interrupt, 95.2% idle
Mem: 52M Active, 20M Inact, 62M Wired, 128K Cache, 59M Buf, 352M Free
Swap:

  PID USERNAME  THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
18701 nobody      1  64   20  3364K  1424K nanslp  51:51  0.00% LCDd
19029 root        1  64   20  3352K  1216K nanslp  28:42  0.00% lcdproc

q to stop.

You can start lcdproc manually by running:

/usr/local/etc/rc.d/lcdd.sh

Though it will try to start both server and client. It's hard to say why it stopped working reliably, disk errors? :-\

Steve

woc38

I issued "/usr/local/etc/rc.d/lcdd.sh" earlier and indeed, now it is working.
Top shows LCDd and lcdproc.

My /usr/local/etc/rc.d/lcdd.sh contains:


#!/bin/sh
#
/usr/bin/nice -20 /usr/local/share/lcdd/LCDd -r 0 -c /usr/local/share/lcdd/LCDd.conf > /dev/null 2>&1 &
/usr/bin/nice -20 /usr/local/share/lcdd/lcdproc C T U &

Thanks for our explanation: now I understand the server (lcdd) and the client (lcdprocc) both need to be running.
What I don't understand is why the client part wasn't running after boot, even though the lcdd.sh script was executed.

<edit>Didn't see your edit before posting. Hmm, diskerrors, don't know. Didn't see any other errors.
Is there a sort of "chkdsk" tool/command for freebsd?
I will keep an eye on this…

<edit2>I booted in single user mode (i guess?) and issued fsck -y /dev/ad2s1a. It gave no errors.</edit2></edit>

stephenw10

As part of my effort to produce a package for the Watchguard lcd I recompiled the driver. Until I get a proper package out anyone installing fresh might as well use this new set of programs. This for 2.0 only, it won't work on 1.2.x. Installation is as before.
Download the attached file and remove the .png extension.
Upload lcdd5.tar via the web GUI, Diagnostics: Command Prompt: Upload, this puts it in /tmp.
Then open a command line via serial or SSH or whatever and:


[2.0-RC3][root@pfSense.localdomain]/root/tmp(3): cd /tmp
[2.0-RC3][root@pfSense.localdomain]/tmp(4): tar xvf lcdd5.tar
x install3.sh
x lcdd/
x lcdd/LCDd.conf
x lcdd/lcdd.sh
x lcdd/lcdproc
x lcdd/LCDd
x lcdd/drivers/
x lcdd/drivers/sdeclcd.so
[2.0-RC3][root@pfSense.localdomain]/tmp(5): ./install3.sh
[2.0-RC3][root@pfSense.localdomain]/tmp(6): /usr/local/etc/rc.d/lcdd.sh

And your display should be working. :)

Changelog:
Renamed the install script to make it easier to type!
The programs, lcdproc and LCDd, are now V0.53 compiled against FreeBSD 8.1-Release.
The driver, sdecldec, was giving a lot of warnings when I tried to compile it. These have been corrected.

The new version seems to obey the LCDd.conf file better such that the option heartbeat=no now works removing the ugly error on the right hand side of the display.

The key mapping is still incorrect for X-e boxes. :(

I had no response to my question as to whether anyone uses the big clock or vertical histogram functions. Personally I would rather have the heartbeat functioning but it's a choice in the driver. Any opinions?

Steve

lcdd5.tar.png

generious

Hi Steve,

I am in the middle of setting up a X500 got it today :) and just used your script for the LCD and it worked flawless the instructions are bang on no problems at all!!
Many Thanks for all your hard work put into this I'm sure it wasn't a easy time and time consuming to say the least so thank you.

stephenw10

Thanks for that! :)

Most of the hard work was done by others before me though.
Coding by ridnhard19 and jjgoessens.

Steve

stephenw10

Since it's now a very long thread and the code is somewhat spread out here are the source files for the sdeclcd driver.

Producing a driver file from these is not simply a matter of invoking gcc! I hope I have noted all the steps I took to do it here.

Steve

sdeclcd.c.png
sdeclcd.h.png