Firebox LCD Driver for LCDProc
-
fix it by:
cd /lib
ln -s libc.so.7 libc.so.6
ln -s libkvm.so.4 libkvm.so.3then it works
Yup. I did that.
Friend also recommended using libmap.conf instead of ln, but I didn't get myself to try it yet.
-
Hi. Kinda new to this. I got a 128 MB card loaded with the PFSense but need some more detailed newb type help to get the LCD portion to work. Can anyone help me?
Thanks for your time,
Jess
Dizydiz@gmail.com -
I am also new and interested in getting the LCD to work on my Firebox. 1.2.1 final works great from CompactFlash otherwise.
-
what is the chance somebody will get the buttons on the firebox x series working within lcdproc? prior to installing pfsense on my watchguard I had full ubuntu server installed using lcd4linux. The latest version of lcd4linux supports 100% the sdec lcd on the firebox x series as well as the buttons. I was able to configure screens and reboot the firebox through the interface.
The aptitude version of lcd4linux doesnt have this support, only the latest v10.1 rc2 version does which I manually downloaded and installed on top of the v10.0 that is available through aptitude.
-
In response to a couple requests; I've posed the LCDproc driver code for the lcd. I've been informed we might be able to make a charmap for the hd44780 standard driver in LCDproc. Doing this would allow the buttons to work too!
Source code is posted on my site: http://www.ktechs.net/
-
Works fine here on 1.2.3-RC1, even without the symlinks. As I run an embeded kernel on a HDD, I just had to comment out the 2 mount lines in the install script before running.
Would be nice to see the buttons working.
Phil
-
fix it by:
cd /lib
ln -s libc.so.7 libc.so.6
ln -s libkvm.so.4 libkvm.so.3then it works
Did you do this on an embedded system or full install? When I try on an embedded, I get:
pfsense:/lib# ln -s libc.so.7 libc.so.6
ln: libc.so.6: Read-only file system -
http://doc.pfsense.org/index.php/Remount_embedded_filesystem_as_read-write
-
Thank you. Awesome job on this. Another x700 LCD working on an embedded system.
-
Since this has been rolled up in the LCDProc package - which driver did you write for the x700? I cannot seem to find the name of the driver in question as well as what port did you assign it (parallel port?, usb com1?)
Thanks again guys. One less X700 on the market.
Dayblade
I recently installed a full version of this and would also like to know if this was ever figured out. What port and driver were used in the package for the watchguards?
-
Just bumpin this up, anyone?
-
I've been looking for a firewall to replace an aging netgear fsv box. Stumbled on pfSense, found it to be pretty amazing, got a decommisioned Firebox x700 and replaced the cf card with a 4g and lcdproc on the 1.2.3rc1 embedded image. Works like a champ. Had some troulble getting lcdproc to work but after finding this thread and adding symlinks, all is good. Was there any ever progress with controlling the lcd with the buttons on the firebox and a charmap that was discussed in this thread? Sorry to resurrect an old thread but thought those that originally started it might have more insight.
Thanks,
Eric -
I've not done any work with mine at all. I started troubleshooting a problem with no connectivity and turned out the old firebox bit the dust :(
So I won't have a test system any more to work with this specific LCD. BUT I did build a kick-ass system with a power efficient mini-itx board, 6 GIG E ports, 2 GIG of memory, fan less and quite all in a nice small metal case. Now I wonder how I can squeeze an LCD in there ::)
I did have fun writing the driver for this. I've never written one before but sounds like a lot of you were able to make some use of it.
-
Hello,
I found where is the keyboard, :) i just wrote a scanning program which tracks changes on all ports… ;D
and if found the 4 pushbuttons are at address 0x379 !!
for the moment, i am not able to reach the front panel lights...
if it was easy to write a small test program, when i tried to modify sdeclcd to add the key_read routine, unfortunately, i encounter a lot of difficulties to compile it ???
If someone could support me for that, so all fireboxes X series could enable the keyboard !
Jean Jacques
-
You have to download the source for lcdproc and modify the autoconfig scripts to find your sources. The best advice I have is to look at the lcdproc documentation on how to integrate a new driver and use the already established name of the files that I've posted. They have a whole
section on how to develop drivers and integrate the
with the autoconfig and autobuild scripts. Once you do that you can just type make :) after you run the configure script of course setting the parameter to include your driver. -
While you were writing, i found the developer documentation.
i was not able to ./configure –enable-driver=all ... there was an error in the documentation, the right switch is --enable-drivers...
unfortunately, i do not know why, the new driver i called sdeclcd2 becomes sdeclcd2SO in the makefile !!
i corrected that manually and i am able to compile it ! :)Now, i am proud ;D to tell that my driver is working fine, the 4 buttons returns "Left","Right","Up" and "Down" and i can change the screens.
For sure, the main part of the program is your, not mine !!
I will put in online in a few days because i prefer to test it before.
About the name, do you want to keep this name ?
Jean Jacques
-
I'd prefer it say the same as it references the name of the LCD module that is being used in the fireboxes. I think we should also submit the source code to the project so people can just download it as part of the normal distribution of LCDProc. Then again i'm not sure if there is such of a "demand" to warrant a driver that is for something so specific.
-
I agree, it's a so specific driver that it may not included in lcdproc.
Anyway, it can be added to pfsense, maybe in download area for those who got a nice red firebox box (i like the color!)
I have made some tests, it works fine, it's nice in addition with lcdexec.
I prefer to have more feedback before giving it. Additionnally, i need to understand my compilation troubles, i certainely did someting wrong in the *.am files, but i do not see what for the moment.
nota : I removed the #include "shared/str.h", because it was giving me a compile error (file not found). It compiles without. Have you some idea?
Jean Jacques
-
Hello all,
I solved all my compile problems!
It was a mistake in Makefile.am …so i tested th driver yesterday and today, it works.
here is attached the file, jst change the name : remove the .txt
make a copy of previous sdeclcd.so file, in case of trouble, you can reinstall it
copy it instead of original sdeclcd.so
restart LCDdThen the 4 keys send messages "Up","Down","Left","Right"
So the standard LCDd.conf will work.
if you want to use my kbd setup, here it is :
PrevScreenKey=Down
NextScreenKey=Up[menu]
MenuKey=Left
EnterKey=Right
UpKey=Up
DownKey=DownEnjoy :D
Jean Jacques
-
Hi all Fireboxes users!
Good news, I improved a little bit sdeclcd.so driver, by adding now a backlight timer.
here are instructions:
- backup your old sdeclcd.so to sdeclcd.so.bak, just in case of trouble, you can reinstall the previous one
- donwload sdeclcd.so.txt, rename it sdeclcd.so
- copy the new sdeclcd.so instead of the old
- edit the /usr/local/etc/LCDd.conf file and add in [sdeclcd] section:
================================
Backlight_Timer=60 if you want 60 seconds
================================
notice: if no entry is written in LCDd.conf, or if value is set to 0, the timer is disabled. - you need to restart your lcdproc driver :
- killall LCDd
- LCDd
- lcdproc
- lcdexec (if you use it)
or reboot your Firebox
=> after 60 seconds (or the time you decided), the backlight will turn off. any key will turn it on. ;D
keep me informed of your trials.
Enjoy it :)
Jean Jacques
