Multiple WAN (VLAN) and Multiple LAN (VLAN) not working



  • Hi All,

    I have a pfSense 2.1.5 setup setup as followed:

    2 x WAN Interface (WAN = VLAN 100 and PUBLIC = VLAN 99)
    5 x LAN Interface (Tagged interfaces)

    Now i have 2 ranges, 185.7.69.0/25 and 185.7.71.0/24. I want NAT 1:1 and outbound routing on both ranges, on the 69.0/25 range, it is working perfectly (the range on which the default gateway resides). But on the second interface it doesn't want to go outside through the 71.0/24 gateway.

    It works inbound, but it doesn't work outbound.

    Attached are a few screenshots from my configuration.

    10.0.1.35 is a server who needs to go outside through the 185.7.71.1 gateway.

    Thanks,
    Sebastiaan.

    ![Screen Shot 2014-10-20 at 11.50.17.png_thumb](/public/imported_attachments/1/Screen Shot 2014-10-20 at 11.50.17.png_thumb)
    ![Screen Shot 2014-10-20 at 11.50.17.png](/public/imported_attachments/1/Screen Shot 2014-10-20 at 11.50.17.png)
    ![Screen Shot 2014-10-20 at 11.49.33.png_thumb](/public/imported_attachments/1/Screen Shot 2014-10-20 at 11.49.33.png_thumb)
    ![Screen Shot 2014-10-20 at 11.49.33.png](/public/imported_attachments/1/Screen Shot 2014-10-20 at 11.49.33.png)