Proxy for Multiwan ??
-
Hi, I have 2 wan and I will like to install a Proxy.
I read a lot of problem with squid :(
So any one know of a Proxy server working on MultiWan ?
Thanks -
I setup Multi-WAN on a 2.1.5 like shown in the official tutorial…. Works only for Connections without squid. And works very fine. But I also need squid. So I installed the squid 3.3-dev package from the package-list, because squid supports the "radom" command since 3.2.
I know it is a dev-package, but I run it on a wlan-network with 5000 Users on peek and its runs very fine. Also with squidguard.
I also know that there is no failover for squid, if one of the lines will be offline, but that is not important for me, because the two lines are from the same provider and come over the same cable. It’s a cable internet connection from unitymedia(Germany).I added these lines, for split the traffic to two lines. *1
acl fiftyPercent random 0.5
tcp_outgoing_address 192.0.2.1 fiftyPercent
tcp_outgoing_address 192.0.2.2*1: The information’s found here: http://wiki.squid-cache.org/Features/AclRandom
greets Smithes -
@smithes wouldn't you also need an IP alias for 192.0.2.2 ?
also fyi:
192.0.2.0/24 192.0.2.0–192.0.2.255 = Assigned as "TEST-NET" in RFC 5737 for use solely in documentation and example source code and should not be used publicly. -
I dont juse that. Its only a example. My own config is another. Look at the link. I copied from there and market it with a footmark. Std and normal to so so.
Greets