Dynamic DNS only updating daily
-
Multiwan setup using dynamic dns on WAN2 (Dyndns paid) that onyl updates at 1:01 cron job or manual "save and force update"
PFsense reports when the IP address changes but always fails on the curl error.
As cron and manual works, I don't beliebe its a multiwan/dns/gateway issue.
Any suggestions?
Thanks
1/10/2028 10:55 php: rc.newwanip: Curl error occurred: Failed connect to members.dyndns.org:443; Operation timed out 1/10/2028 10:55 php: rc.newwanip: DynDNS (xxx.dyndns.biz): Current Service: dyndns 1/10/2028 10:55 php: rc.newwanip: DynDNS (xxx.dyndns.biz): DynDns _checkStatus() starting. 1/10/2028 10:54 php: rc.newwanip: DynDNS: (xxx.dyndns.biz) DNS update() starting. 1/10/2028 10:54 php: rc.newwanip: DynDNS (xxx.dyndns.biz): DynDns _update() starting. 1/10/2028 10:54 php: rc.newwanip: DynDns (xxx.dyndns.biz): DynDns: cacheIP != wan_ip. Updating. Cached IP: xxx.157.122.51 WAN IP: xxx.157.23.92 1/10/2028 10:54 php: rc.newwanip: DynDns (xxx.dyndns.biz): Current WAN IP: xxx.157.23.92 Cached IP: xxx.157.122.51 1/10/2028 10:54 php: rc.newwanip: DynDns (xxx.dyndns.biz): xxx.157.23.92 extracted from local system. 1/10/2028 10:54 php: rc.newwanip: DynDNS (xxx.dyndns.biz): running get_failover_interface for opt2\. found bge0_vlan4 1/10/2028 10:54 php: rc.newwanip: DynDns (xxx.dyndns.biz): xxx.157.23.92 extracted from local system. 1/10/2028 10:54 php: rc.newwanip: DynDns: updatedns() starting
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.