Failed to boot
-
I have intel d915glvg board with seagate 80GB sataII. Installation went fine with 1.2 rc4 but when I reboot the system it looks like new screen and I cant read any thing there (to fast).
any ideas.
-
Sounds like a Problem similiar to what I have seen on a nexcom 1041c with an 80 gb drive. See http://marc.info/?l=pfsense-support&m=113688606829411&w=2 for what solved it for me.
-
I just change the SATA to PATA and its working now. Although the ICH6 is listed in HCL.
-
Most likely a bug. If you have an extra drive and or MB it would be most helpful if you could send it to the SATA driver maintainer for FreeBSD (Søren). http://people.freebsd.org/~sos/