APU install only shows 2 interfaces
-
Yesterday I installed pfSense on an APU with mSata. All went well but only 2 network interfaces are showing. Is that some way to enable the 3rd network interface ?
Thanks in advance.
-
Interfaces –> (assign) and click the "+"
-
There is no + in the assign screen only an x beside the WAN port. The interface isn't showing at the OS level.
-
Well that is a bit tricky - the OS should have found re0, re1 and re2.
At the console, does the menu option to assign interfaces only give you 2 to choose from? -
When I do an assign interfaces from the console I receive the following:
Valid interfaces are:
re0 00:0d:b9:35:95:10 (up) RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet
re1 00:0d:b9:35:95:11 (up) RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet
re2 00:0d:b9:35:95:12 (down) RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet -
Did an auto detect on all three and they are all working now.