Upgrade 2.1.3 to 2.1.5 failing - no errors
-
gui shows 16% usage.
the upgrade seems to go successful, but after reboot still shows 2.1.3 and then states it is reinstalling packages like normal. I've updated 4 others with no problems, it is just this one with the problem.
-
Nothing in the System log?
-
THe logs clear from the upgrade, but this is there.
ov 28 11:43:41 syslogd: kernel boot file is /boot/kernel/kernel
Nov 28 11:43:41 syslogd: exiting on signal 15
Nov 28 11:43:41 php: rc.bootup: Creating rrd update script
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/ipsec-packets.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/ipsec-traffic.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt3-packets.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt3-traffic.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt1-packets.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt1-traffic.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/lan-packets.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/lan-traffic.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/wan-packets.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:41 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/wan-traffic.rrd N:U:U:U:U:U:U:U:U' returned exit code '1', the output was 'ERROR: expected 4 data source readings (got 8) from N:U:U:U:U:U:U:U:U'
Nov 28 11:43:30 check_reload_status: Updating all dyndns
Nov 28 11:43:29 php: rc.bootup: ROUTING: setting default route to 64.33.182.65
Nov 28 11:43:25 syslogd: sendto: Network is unreachable
Nov 28 11:43:25 kernel: em1: link state changed to UP
Nov 28 11:43:25 check_reload_status: Linkup starting em1
Nov 28 11:43:24 kernel: em2: link state changed to UP -
Do you have a bunch of packages installed? Perhaps as an idea, you might try removing all your installed packages and then try the upgrade. This may be a severe option if you have several packages installed and configured. Before I tried anything drastic, I would make sure that I have a fresh backup file via Diagnostics - Backup/Restore, and preferably a bare-metal image that you could restore in a snap if necessary. Or you could try performing a backup and then do a fresh install of 2.1.5, then restore from your backup file.
-
Are you sure you're installing 32-bit over 32-bit or 64-bit over 64-bit? I think installing 64 over 32 chokes on RRD data.
-
Are you sure you're installing 32-bit over 32-bit or 64-bit over 64-bit? I think installing 64 over 32 chokes on RRD data.
i would think the autoinstaller would catch that, right?
-
@KOM:
Do you have a bunch of packages installed? Perhaps as an idea, you might try removing all your installed packages and then try the upgrade. This may be a severe option if you have several packages installed and configured. Before I tried anything drastic, I would make sure that I have a fresh backup file via Diagnostics - Backup/Restore, and preferably a bare-metal image that you could restore in a snap if necessary. Or you could try performing a backup and then do a fresh install of 2.1.5, then restore from your backup file.
the only package is NRPE
-
Are you sure you're installing 32-bit over 32-bit or 64-bit over 64-bit? I think installing 64 over 32 chokes on RRD data.
i would think the autoinstaller would catch that, right?
Going from 32 to 64 I think there are issues with that. I would take a backup without RRD data, install fresh, and restore the backup.
-
I'm afraid to go from 32 to 64 bit on an upgrade. Unless there is some major config issues, I'd probably wipe and do a clean install.
I hate unexpected side effects in a device that my internet depends on. -
Those RRD logs are symptomatic of a system that ran out of RAM at boot time. Only circumstances where I can recall seeing that are systems with 256 MB or less RAM, running nano (so a chunk of the RAM is taken by rw filesystems), and more packages or other services than should be run with minimal RAM.
