Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Login

    Nasty pppoe reconnection bug returns in 2.2 RC

    2.2 Snapshot Feedback and Problems - RETIRED
    4
    24
    4.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • X
      xbipin
      last edited by

      do i use with the first patch or shall i revert the first patch and then apply the second one?

      1 Reply Last reply Reply Quote 0
      • E
        eri--
        last edited by

        It does not matter.You can apply both or either

        1 Reply Last reply Reply Quote 0
        • X
          xbipin
          last edited by

          i applied both and then tried but i dont seem to get that message in system log and issue is as it is

          Dec 18 08:57:45 	kernel: vr1: link state changed to DOWN
Dec 18 08:58:49 	php: rc.kill_states: rc.kill_states: Removing states for IP 2.51.127.81/32
Dec 18 08:59:01 	check_reload_status: Linkup starting vr1
Dec 18 08:59:01 	kernel: vr1: link state changed to UP
Dec 18 08:59:41 	kernel: ovpnc1: link state changed to DOWN
Dec 18 08:59:41 	check_reload_status: Reloading filter
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:48 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 08:59:49 	php-fpm[5482]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:12 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:12 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 18 09:00:12 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).


          Dec 18 08:58:18 	ppp: [wan_link0] LCP: no reply to 2 echo request(s)
Dec 18 08:58:38 	ppp: [wan_link0] LCP: no reply to 4 echo request(s)
Dec 18 08:58:48 	ppp: [wan_link0] LCP: no reply to 5 echo request(s)
Dec 18 08:58:48 	ppp: [wan_link0] LCP: peer not responding to echo requests
Dec 18 08:58:48 	ppp: [wan_link0] LCP: state change Opened --> Stopping
Dec 18 08:58:48 	ppp: [wan_link0] Link: Leave bundle "wan"
Dec 18 08:58:48 	ppp: [wan] Bundle: Status update: up 0 links, total bandwidth 9600 bps
Dec 18 08:58:48 	ppp: [wan] IPCP: Close event
Dec 18 08:58:48 	ppp: [wan] IPCP: state change Opened --> Closing
Dec 18 08:58:48 	ppp: [wan] IPCP: SendTerminateReq #4
Dec 18 08:58:48 	ppp: [wan] IPCP: LayerDown
Dec 18 08:58:50 	ppp: [wan] IFACE: Delete route 0.0.0.0/0 2.48.4.1 failed: No such process
Dec 18 08:58:50 	ppp: [wan] IFACE: Down event
Dec 18 08:58:50 	ppp: [wan] IFACE: Rename interface pppoe0 to pppoe0
Dec 18 08:58:50 	ppp: [wan] IPV6CP: Close event
Dec 18 08:58:50 	ppp: [wan] IPV6CP: state change Stopped --> Closed
Dec 18 08:58:50 	ppp: [wan] IPCP: Down event
Dec 18 08:58:50 	ppp: [wan] IPCP: LayerFinish
Dec 18 08:58:50 	ppp: [wan] Bundle: No NCPs left. Closing links...
Dec 18 08:58:50 	ppp: [wan] IPCP: state change Closing --> Initial
Dec 18 08:58:50 	ppp: [wan] IPV6CP: Down event
Dec 18 08:58:50 	ppp: [wan] IPV6CP: state change Closed --> Initial
Dec 18 08:58:50 	ppp: [wan_link0] LCP: SendTerminateReq #3
Dec 18 08:58:50 	ppp: [wan_link0] LCP: LayerDown
Dec 18 08:58:53 	ppp: [wan_link0] LCP: SendTerminateReq #4
Dec 18 08:58:55 	ppp: [wan_link0] LCP: state change Stopping --> Stopped
Dec 18 08:58:55 	ppp: [wan_link0] LCP: LayerFinish
Dec 18 08:58:55 	ppp: [wan_link0] PPPoE: connection closed
Dec 18 08:58:55 	ppp: [wan_link0] Link: DOWN event
Dec 18 08:58:55 	ppp: [wan_link0] LCP: Down event
Dec 18 08:58:55 	ppp: [wan_link0] LCP: state change Stopped --> Starting
Dec 18 08:58:55 	ppp: [wan_link0] LCP: LayerStart
Dec 18 08:58:55 	ppp: [wan_link0] Link: reconnection attempt 1 in 3 seconds
Dec 18 08:58:58 	ppp: [wan_link0] Link: reconnection attempt 1
Dec 18 08:58:58 	ppp: [wan_link0] PPPoE: Connecting to ''
          1 Reply Last reply Reply Quote 0
          • E
            eri--
            last edited by

            Can you show me from config.xml the interface section where pppoe is configured.
            Also from ppp section related to this interface?

            1 Reply Last reply Reply Quote 0
            • X
              xbipin
              last edited by 

              	 <interfaces><wan><if>pppoe0</if>
			<bandwidth>100</bandwidth>
			<bandwidthtype>Mb</bandwidthtype>
			 <spoofmac><disableftpproxy><enable><blockpriv><blockbogons><mtu>1492</mtu>
			<ipaddr>pppoe</ipaddr></blockbogons></blockpriv></enable></disableftpproxy></spoofmac></wan> 
		 <lan><if>vr0</if>
			<bandwidth>100</bandwidth>
			<bandwidthtype>Mb</bandwidthtype>
			 <bridge><disableftpproxy><enable><spoofmac><ipaddr>192.168.0.1</ipaddr>
			<subnet>24</subnet></spoofmac></enable></disableftpproxy></bridge></lan> 
		 <opt2><if>ovpnc1</if>
			 <spoofmac><enable></enable></spoofmac></opt2></interfaces> 

              	 <ppps><ppp><ptpid>0</ptpid>
			<type>pppoe</type>
			<if>pppoe0</if>
			<ports>vr1</ports>
			<username>username</username>
			<password>password</password>
			 <ondemand><bandwidth><mtu><mru><mrru><provider><pppoe-reset-type>custom</pppoe-reset-type></provider></mrru></mru></mtu></bandwidth></ondemand></ppp></ppps>
              1 Reply Last reply Reply Quote 0
              • E
                eri--
                last edited by

                I just pushed a fix beacause the code in rc.linkup was wrong.

                The commit will apear or on github for you to test.

                1 Reply Last reply Reply Quote 0
                • X
                  xbipin
                  last edited by

                  could u kindly give me the link so i can test?

                  1 Reply Last reply Reply Quote 0
                  • X
                    xbipin
                    last edited by

                    ok dont bother, found it and applied and seems to work but will test once more tomorrow after a reboot and all possible scenarios and then give u final confirmation.

                    bytheway i found one bug, when pppoe reconnects, the serial console shows this which actually it shouldnt (check the last 2 lines)

                    FreeBSD/i386 (firewall) (ttyu0)

*** Welcome to pfSense 2.2-RC-nanobsd (i386) on firewall ***

 WAN (wan)       -> pppoe0     -> v4/PPPoE: x.x.x.x/32
 LAN (lan)       -> vr0        -> v4: 192.168.0.1/24
 VPN (opt2)      -> ovpnc1     -> v4: 10.10.0.222/32
 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) pfSense Developer Shell
 4) Reset to factory defaults         13) Upgrade from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: Dec 18 18:45:13 php-fpm[52868]: /rc.newwanip: Removing static r
oute for monitor y.y.y.y and adding a new route through z.z.z.z
                    1 Reply Last reply Reply Quote 0
                    • E
                      eri--
                      last edited by

                      The error log is during bootup or after?

                      1 Reply Last reply Reply Quote 0
                      • X
                        xbipin
                        last edited by

                        It happens after, once the wan is disconnected and then it auto reconnects

                        1 Reply Last reply Reply Quote 0
                        • K
                          kb1ujs
                          last edited by

                          Would one of you mind posting a link to the fixed code and a brief description of how to apply it?  I am seeing the same problem with PPPoE on my DSL connection under pfSense 2.2 RC.

                          1 Reply Last reply Reply Quote 0
                          • K
                            kb1ujs
                            last edited by

                            @kb1ujs:

                            Would one of you mind posting a link to the fixed code and a brief description of how to apply it?  I am seeing the same problem with PPPoE on my DSL connection under pfSense 2.2 RC.

                            OK, I found the commit in question at https://github.com/pfsense/pfsense/blob/ab0e40807d3a38972b04f75f8c9429bfb93f7a5d/etc/rc.linkup and manually edited it into the /etc/rc.linkup file using ee.  I'm happy to say it did the trick.

                            1 Reply Last reply Reply Quote 0
                            • X
                              xbipin
                              last edited by

                              well for me it worked once only and the next 5 times i tried it never worked

                              Dec 20 09:28:35 	kernel: vr1: link state changed to DOWN
Dec 20 09:29:41 	php: rc.kill_states: rc.kill_states: Removing states for IP 92.99.177.145/32
Dec 20 09:29:41 	check_reload_status: Rewriting resolv.conf
Dec 20 09:29:46 	kernel: ovpnc1: link state changed to DOWN
Dec 20 09:29:46 	check_reload_status: Reloading filter
Dec 20 09:29:47 	check_reload_status: updating dyndns WAN
Dec 20 09:29:47 	check_reload_status: Restarting ipsec tunnels
Dec 20 09:29:47 	check_reload_status: Restarting OpenVPN tunnels/interfaces
Dec 20 09:29:47 	check_reload_status: Reloading filter
Dec 20 09:29:50 	kernel: vr1: link state changed to UP
Dec 20 09:29:50 	check_reload_status: Linkup starting vr1
Dec 20 09:29:51 	php-fpm[32866]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN.
Dec 20 09:29:51 	php-fpm[32866]: /rc.openvpn: OpenVPN: Resync client1 ExpressVPN
Dec 20 09:29:51 	check_reload_status: Reloading filter
Dec 20 09:29:57 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:57 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:57 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:57 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:57 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:57 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:58 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:58 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:29:58 	php-fpm[23733]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:05 	php-fpm[32866]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Dec 20 09:30:18 	login: login on ttyu0 as root
Dec 20 09:30:18 	sshlockout[47575]: sshlockout/webConfigurator v3.0 starting up
                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post