• Hy All

    I have a trouble to installing my USB 3g HUAWEY K3806 and reading the guide I see that if don't read the model I have to post the problem in the forum.

    This is the LOG message

    The modem is not responding to "AT" at ModemCmd: label.
    Dec 17 11:20:25 ppp: [opt6_link0] MODEM: chat script failed

    And this is my dmesg

    ugen1.2: <vodafone zte="">at usbus1
    umass1: <vodafone 0="" 2="" zte="" k3806-z,="" class="" 0,="" rev="" 2.00="" 0.01,="" addr="">on usbus1
    umass1:  SCSI over Bulk-Only; quirks = 0x0000
    umass1:1:1👎 Attached to scbus1
    (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
    (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
    (probe0:umass-sim1:1:0:0): SCSI status: Check Condition
    (probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
    cd0 at umass-sim1 bus 1 scbus1 target 0 lun 0
    cd0: <vodafone usb="" scsi="" cd-rom="" 0001="">Removable CD-ROM SCSI-0 device
    cd0: 40.000MB/s transfers
    cd0: Attempt to query device size failed: NOT READY, Medium not present

    Can you help me please

    Thank you so much


  • Someone that can help me?

  • I've had a look at a few similar posts, and from what I can see this modem isn't supported in the 8.3 release of FreeBSD: Unless anyone else has another idea I can only suggest you try a different modem - and check first if it's compatible with FeeBSD 8.3.

  • Netgate Administrator

    It's stuck in CD-ROM mode and needs to be switched to modem mode. The device appears to be a ZTE K3806-Z not a Huawei. Some quick Googling shows it has a number of modes, you want to get modem mode not cdc-ether mode to work well with pfSense.
    There's no easy fix for this. You can probably install usb-modeswitch and change to the correct mode but you then need to hope that the resulting USB ID is something u3g knows about and creates serial ports for.


  • Ok thank you so much so our replay :) . I think that it's more simple change device and pick one compatible with pfsense

    The thread for me it resolved


Log in to reply