IPsec tunnel problem with 2.1.5 and 2.2rc
-
Hi,
I can't get my tunnels connected anymore since build from 7th of Jan.
before it was working good with Aggressive Mode, but even switching to Main didn't help.
I have 2 phase 2 policies.
The other side of course is a pfsense 2.1.5
I'm using Main, AES/256, with SHA, DH Key2 with NAT-T enabled.
Phase2: ESP, AES(auto) with SHA1, MD5, PFS key2
Additional info: I'm dual homed, already tried to switch the tunnel to other WAN, same result.Updated to build 11th of Jan.
Errors on the 2.1.5:
Jan 10 17:17:16 racoon: ERROR: phase1 negotiation failed due to time up. 14607675c166a280:0000000000000000 Jan 10 17:17:10 racoon: [mchome kabel]: [9.1.176.100] INFO: request for establishing IPsec-SA was queued due to no phase1 found. Jan 10 17:17:07 racoon: [mchome kabel]: [9.1.176.100] INFO: request for establishing IPsec-SA was queued due to no phase1 found. Jan 10 17:17:02 racoon: INFO: delete phase 2 handler. Jan 10 17:17:02 racoon: [mchome kabel]: [9.1.176.100] ERROR: phase2 negotiation failed due to time up waiting for phase1 [Remote Side not responding]. ESP 9.1.176.100[0]->6.1.47.71[0] -
This is the log from 2.2build 11th of Jan:
Jan 11 12:29:46 charon: 15[CFG] ignoring acquire, connection attempt pending Jan 11 12:29:46 charon: 16[KNL] creating acquire job for policy 9.1.188.120/32|/0 === 6.1.47.71/32|/0 with reqid {5} Jan 11 12:29:40 charon: 16[NET] sending packet: from 9.1.188.120[500] to 6.1.47.71[500] (184 bytes) Jan 11 12:29:40 charon: 16[ENC] generating ID_PROT response 0 [ SA V V V V V ] Jan 11 12:29:40 charon: 16[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA Jan 11 12:29:40 charon: 16[IKE] <95> 6.1.47.71 is initiating a Main Mode IKE_SA Jan 11 12:29:40 charon: 16[IKE] received DPD vendor ID Jan 11 12:29:40 charon: 16[IKE] <95> received DPD vendor ID Jan 11 12:29:40 charon: 16[IKE] received FRAGMENTATION vendor ID Jan 11 12:29:40 charon: 16[IKE] <95> received FRAGMENTATION vendor ID Jan 11 12:29:40 charon: 16[IKE] received draft-ietf-ipsec-nat-t-ike-00 vendor ID Jan 11 12:29:40 charon: 16[IKE] <95> received draft-ietf-ipsec-nat-t-ike-00 vendor ID Jan 11 12:29:40 charon: 16[IKE] received draft-ietf-ipsec-nat-t-ike-02\n vendor ID Jan 11 12:29:40 charon: 16[IKE] <95> received draft-ietf-ipsec-nat-t-ike-02\n vendor ID Jan 11 12:29:40 charon: 16[IKE] received draft-ietf-ipsec-nat-t-ike-02 vendor ID Jan 11 12:29:40 charon: 16[IKE] <95> received draft-ietf-ipsec-nat-t-ike-02 vendor ID Jan 11 12:29:40 charon: 16[IKE] received NAT-T (RFC 3947) vendor ID Jan 11 12:29:40 charon: 16[IKE] <95> received NAT-T (RFC 3947) vendor ID Jan 11 12:29:40 charon: 16[ENC] parsed ID_PROT request 0 [ SA V V V V V V ] Jan 11 12:29:40 charon: 16[NET] received packet: from 6.1.47.71[500] to 9.1.188.120[500] (212 bytes)This one is 9.1.188.120 and trying to reach the .47.71
The ipsec status shows this:
Any identifier 9.1.188.120
Port: 500 Any identifier 6.1.47.71
Port: 500 IKEv1
responder AES_CBC:256
HMAC_SHA1_96:0
PRF_HMAC_SHA1
MODP_1024connecting
Connect
inetra_LAN-DMZ Any identifier 9.1.188.120
Port: 500 Any identifier 6.1.47.71
Port: 500 IKEv1
initiatorconnecting
Any help greatly appreciated.
Marc -
Update:
The tunnel is defined to use IF WAN, but when I do a packetcapture with filter on IF KABEL (o pf2.2) I can see packets with WAN public ipaddess to my remote peer with port 500 (UDP).Either there's something wrong with the Packetcapture or chron is sending right packets on wrong if out.
With 'right' I mean they do have the IP of the IF they should leave from but are showing on the wrong IF (KABEL). -
Hmm, just found that I'm using advanced outbound NAT with these two rules:
( Hybrid Outbound NAT rule generation
(Automatic Outbound NAT + rules below)KABELDE 192.168.24.0/24 * * * KABELDE address * NO
WAN any * * * WAN address * NOCould this be my problem with charon ?
-
Your WAN NAT with source "any" is definitely a problem, that's NATing the IPsec, which you can't do.
You'll also want to be on something newer than the 7th with IPsec and multi-WAN, there were issues there that were resolved a day or so after that.
-
Thanks for the hint.
I updated to the evening build of the 11th, removed the "any" NAT rule and still get stuck. -
You need something from today late or wait or tomorrow ones.
-
Now seeing:
Jan 12 21:07:29 racoon: [mchome kabel]: [93.104.176.148] ERROR: couldn't find the pskey for 93.104.176.148. Jan 12 21:07:29 racoon: INFO: Adding xauth VID payload. Jan 12 21:07:29 racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02 Jan 12 21:07:29 racoon: INFO: received Vendor ID: RFC 3947 Jan 12 21:07:29 racoon: INFO: received broken Microsoft ID: FRAGMENTATION Jan 12 21:07:29 racoon: INFO: received Vendor ID: CISCO-UNITY Jan 12 21:07:29 racoon: INFO: received Vendor ID: DPD Jan 12 21:07:29 racoon: INFO: received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt Jan 12 21:07:29 racoon: INFO: begin Identity Protection mode.Jan 12 21:07:28 racoon: ERROR: such policy already exists. anyway replace it: 192.168.24.0/24[0] 10.0.48.0/24[0] proto=any dir=in Jan 12 21:07:28 racoon: ERROR: such policy already exists. anyway replace it: 10.0.48.0/24[0] 192.168.24.0/24[0] proto=any dir=out Jan 12 21:07:28 racoon: ERROR: such policy already exists. anyway replace it: 192.168.24.0/24[0] 10.0.47.0/24[0] proto=any dir=in Jan 12 21:07:28 racoon: ERROR: such policy already exists. anyway replace it: 10.0.47.0/24[0] 192.168.24.0/24[0] proto=any dir=out Jan 12 21:07:28 racoon: INFO: unsupported PF_KEY message REGISTER Jan 12 21:07:28 racoon: INFO: unsupported PF_KEY message REGISTER Jan 12 21:07:28 racoon: INFO: unsupported PF_KEY message REGISTER -
@Ermal:
I took the latest availabled thru my autoupdater 20mins ago.
Will check again for the next 2hours… UPDATED to todays release:
Still getting above errors and :Jan 12 21:27:55 racoon: INFO: delete phase 2 handler. Jan 12 21:27:55 racoon: [mchome kabel]: [9.1.180.217] ERROR: phase2 negotiation failed due to time up waiting for phase1 [Remote Side not responding]. ESP 9.1.180.217[0]->6.1.47.71[0]Anymore ideas ?
-
You're still getting the "ERROR: couldn't find the pskey" log from your post earlier today? Likely you have a config mismatch of some sort, maybe after changing the WANs around things weren't set back to match appropriately.
-
Hi Chris,
yes, that's what I see on the 2.1.5 side on the 2.2 I see the log below:
I just updated to the todays build.Jan 13 20:16:53 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:16:53 charon: 16[ENC] generating ID_PROT response 0 [ KE No ] Jan 13 20:16:53 charon: 16[ENC] parsed ID_PROT request 0 [ KE No ] Jan 13 20:16:53 charon: 16[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:16:53 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (144 bytes) Jan 13 20:16:53 charon: 16[ENC] generating ID_PROT response 0 [ SA V V V ] Jan 13 20:16:53 charon: 16[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:16:53 charon: 16[IKE] <205> 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:16:53 charon: 16[IKE] received DPD vendor ID Jan 13 20:16:53 charon: 16[IKE] <205> received DPD vendor ID Jan 13 20:16:53 charon: 16[IKE] received FRAGMENTATION vendor ID Jan 13 20:16:53 charon: 16[IKE] <205> received FRAGMENTATION vendor ID Jan 13 20:16:53 charon: 16[ENC] parsed ID_PROT request 0 [ SA V V ] Jan 13 20:16:53 charon: 16[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (132 bytes) Jan 13 20:16:50 charon: 16[CFG] ignoring acquire, connection attempt pending Jan 13 20:16:50 charon: 09[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:16:46 charon: 09[JOB] deleting half open IKE_SA after timeout Jan 13 20:16:45 charon: 09[CFG] ignoring acquire, connection attempt pending Jan 13 20:16:45 charon: 16[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:16:43 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (108 bytes) Jan 13 20:16:43 charon: 16[IKE] sending retransmit 5 of request message ID 0, seq 3 Jan 13 20:16:43 charon: 16[IKE] <con1000|192> sending retransmit 5 of request message ID 0, seq 3 Jan 13 20:16:29 charon: 16[CFG] ignoring acquire, connection attempt pending Jan 13 20:16:29 charon: 10[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:16:16 charon: 10[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:16:16 charon: 10[ENC] generating ID_PROT response 0 [ KE No ] Jan 13 20:16:16 charon: 10[ENC] parsed ID_PROT request 0 [ KE No ] Jan 13 20:16:16 charon: 10[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:16:16 charon: 10[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (144 bytes) Jan 13 20:16:16 charon: 10[ENC] generating ID_PROT response 0 [ SA V V V ] Jan 13 20:16:16 charon: 10[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:16:16 charon: 10[IKE] <204> 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:16:16 charon: 10[IKE] received DPD vendor ID Jan 13 20:16:16 charon: 10[IKE] <204> received DPD vendor ID Jan 13 20:16:16 charon: 10[IKE] received FRAGMENTATION vendor ID Jan 13 20:16:16 charon: 10[IKE] <204> received FRAGMENTATION vendor ID Jan 13 20:16:16 charon: 10[ENC] parsed ID_PROT request 0 [ SA V V ] Jan 13 20:16:16 charon: 10[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (132 bytes) Jan 13 20:16:15 charon: 10[JOB] deleting half open IKE_SA after timeout Jan 13 20:16:01 charon: 10[CFG] ignoring acquire, connection attempt pending Jan 13 20:16:01 charon: 16[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:16:01 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (108 bytes) Jan 13 20:16:01 charon: 16[IKE] sending retransmit 4 of request message ID 0, seq 3 Jan 13 20:16:01 charon: 16[IKE] <con1000|192> sending retransmit 4 of request message ID 0, seq 3 Jan 13 20:15:54 charon: 16[CFG] ignoring acquire, connection attempt pending Jan 13 20:15:54 charon: 10[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:15:45 charon: 10[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:15:45 charon: 10[ENC] generating ID_PROT response 0 [ KE No ] Jan 13 20:15:45 charon: 10[ENC] parsed ID_PROT request 0 [ KE No ] Jan 13 20:15:45 charon: 10[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:15:45 charon: 10[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (144 bytes) Jan 13 20:15:45 charon: 10[ENC] generating ID_PROT response 0 [ SA V V V ] Jan 13 20:15:45 charon: 10[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:15:45 charon: 10[IKE] <203> 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:15:45 charon: 10[IKE] received DPD vendor ID Jan 13 20:15:45 charon: 10[IKE] <203> received DPD vendor ID Jan 13 20:15:45 charon: 10[IKE] received FRAGMENTATION vendor ID Jan 13 20:15:45 charon: 10[IKE] <203> received FRAGMENTATION vendor ID Jan 13 20:15:45 charon: 10[ENC] parsed ID_PROT request 0 [ SA V V ] Jan 13 20:15:45 charon: 10[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (132 bytes) Jan 13 20:15:42 charon: 10[JOB] deleting half open IKE_SA after timeout Jan 13 20:15:39 charon: 10[CFG] ignoring acquire, connection attempt pending Jan 13 20:15:39 charon: 16[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:15:37 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (108 bytes) Jan 13 20:15:37 charon: 16[IKE] sending retransmit 3 of request message ID 0, seq 3 Jan 13 20:15:37 charon: 16[IKE] <con1000|192> sending retransmit 3 of request message ID 0, seq 3 Jan 13 20:15:33 charon: 16[JOB] deleting half open IKE_SA after timeout Jan 13 20:15:24 charon: 12[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (108 bytes) Jan 13 20:15:24 charon: 12[IKE] sending retransmit 2 of request message ID 0, seq 3 Jan 13 20:15:24 charon: 12[IKE] <con1000|192> sending retransmit 2 of request message ID 0, seq 3 Jan 13 20:15:17 charon: 12[CFG] ignoring acquire, connection attempt pending Jan 13 20:15:17 charon: 16[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:15:17 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (108 bytes) Jan 13 20:15:17 charon: 16[IKE] sending retransmit 1 of request message ID 0, seq 3 Jan 13 20:15:17 charon: 16[IKE] <con1000|192> sending retransmit 1 of request message ID 0, seq 3 Jan 13 20:15:13 charon: 12[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (108 bytes) Jan 13 20:15:13 charon: 12[ENC] generating ID_PROT request 0 [ ID HASH N(INITIAL_CONTACT) ] Jan 13 20:15:13 charon: 12[ENC] parsed ID_PROT response 0 [ KE No ] Jan 13 20:15:13 charon: 12[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:15:13 charon: 12[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:15:13 charon: 12[ENC] generating ID_PROT request 0 [ KE No ] Jan 13 20:15:13 charon: 12[IKE] received FRAGMENTATION vendor ID Jan 13 20:15:13 charon: 12[IKE] <con1000|192> received FRAGMENTATION vendor ID Jan 13 20:15:13 charon: 12[IKE] received DPD vendor ID Jan 13 20:15:13 charon: 12[IKE] <con1000|192> received DPD vendor ID Jan 13 20:15:13 charon: 12[IKE] received XAuth vendor ID Jan 13 20:15:13 charon: 12[IKE] <con1000|192> received XAuth vendor ID Jan 13 20:15:13 charon: 12[ENC] parsed ID_PROT response 0 [ SA V V V ] Jan 13 20:15:13 charon: 12[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (144 bytes) Jan 13 20:15:13 charon: 12[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (184 bytes) Jan 13 20:15:13 charon: 12[ENC] generating ID_PROT request 0 [ SA V V V V V ] Jan 13 20:15:13 charon: 12[IKE] initiating Main Mode IKE_SA con1000[192] to 6.1.47.71 Jan 13 20:15:13 charon: 12[IKE] <con1000|192> initiating Main Mode IKE_SA con1000[192] to 6.1.47.71 Jan 13 20:15:13 charon: 12[IKE] peer not responding, trying again (3/3) Jan 13 20:15:13 charon: 12[IKE] <con1000|192> peer not responding, trying again (3/3) Jan 13 20:15:13 charon: 12[IKE] giving up after 5 retransmits Jan 13 20:15:13 charon: 12[IKE] <con1000|192> giving up after 5 retransmits Jan 13 20:15:12 charon: 12[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:15:12 charon: 12[ENC] generating ID_PROT response 0 [ KE No ] Jan 13 20:15:12 charon: 12[ENC] parsed ID_PROT request 0 [ KE No ] Jan 13 20:15:12 charon: 12[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:15:12 charon: 12[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (144 bytes) Jan 13 20:15:12 charon: 12[ENC] generating ID_PROT response 0 [ SA V V V ] Jan 13 20:15:12 charon: 12[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:15:12 charon: 12[IKE] <202> 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:15:12 charon: 12[IKE] received DPD vendor ID Jan 13 20:15:12 charon: 12[IKE] <202> received DPD vendor ID Jan 13 20:15:12 charon: 12[IKE] received FRAGMENTATION vendor ID Jan 13 20:15:12 charon: 12[IKE] <202> received FRAGMENTATION vendor ID Jan 13 20:15:12 charon: 12[ENC] parsed ID_PROT request 0 [ SA V V ] Jan 13 20:15:12 charon: 12[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (132 bytes) Jan 13 20:15:08 charon: 16[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {22} Jan 13 20:15:08 charon: 16[JOB] deleting half open IKE_SA after timeout Jan 13 20:15:03 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:15:03 charon: 16[ENC] generating ID_PROT response 0 [ KE No ] Jan 13 20:15:03 charon: 16[ENC] parsed ID_PROT request 0 [ KE No ] Jan 13 20:15:03 charon: 16[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:15:03 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (144 bytes) Jan 13 20:15:03 charon: 16[ENC] generating ID_PROT response 0 [ SA V V V ] Jan 13 20:15:03 charon: 16[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:15:03 charon: 16[IKE] <201> 6.1.47.71 is initiating a Main Mode IKE_SA Jan 13 20:15:03 charon: 16[IKE] received DPD vendor ID Jan 13 20:15:03 charon: 16[IKE] <201> received DPD vendor ID Jan 13 20:15:03 charon: 16[IKE] received FRAGMENTATION vendor ID Jan 13 20:15:03 charon: 16[IKE] <201> received FRAGMENTATION vendor ID Jan 13 20:15:03 charon: 16[ENC] parsed ID_PROT request 0 [ SA V V ] Jan 13 20:15:03 charon: 16[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (132 bytes) Jan 13 20:15:03 charon: 08[CFG] ignoring acquire, connection attempt pending Jan 13 20:15:03 charon: 08[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:14:51 charon: 08[CFG] ignoring acquire, connection attempt pending Jan 13 20:14:51 charon: 16[KNL] creating acquire job for policy 9.1.180.214/32|/0 === 6.1.47.71/32|/0 with reqid {21} Jan 13 20:14:38 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (196 bytes) Jan 13 20:14:38 charon: 16[ENC] generating ID_PROT response 0 [ KE No ] Jan 13 20:14:38 charon: 16[ENC] parsed ID_PROT request 0 [ KE No ] Jan 13 20:14:38 charon: 16[NET] received packet: from 6.1.47.71[500] to 9.1.180.214[500] (180 bytes) Jan 13 20:14:38 charon: 16[NET] sending packet: from 9.1.180.214[500] to 6.1.47.71[500] (144 bytes) Jan 13 20:14:38 charon: 16[ENC] generating ID_PROT response 0 [ SA V V V ] Jan 13 20:14:38 charon: 16[IKE] 6.1.47.71 is initiating a Main Mode IKE_SA</con1000|192></con1000|192></con1000|192></con1000|192></con1000|192></con1000|192></con1000|192></con1000|192></con1000|192></con1000|192></con1000|192>This is a more complete excerpt from charon.
But I don't know which error levels need to be set in the IPsec debug section, please advice.TIA
Marc -
Just changed my outbound NAT to
In the IPsec status I continuously see
inetra_LAN-DMZ net.dyndns.org 9.1.180.214 Port: 500 Any identifier 6.1.47.71 Port: 500 IKEv1 initiator AES_CBC:256 HMAC_SHA1_96:0 PRF_HMAC_SHA1 MODP_1024 connectingbut at the same time I see a another line with responder coming in…
And no, I checked thoroughly that the profiles match.
Some more questions on the settings:
How should they be set to ensure compatibility between 2.1.5 and 2.2 ?
Prefer older IPsec SAs
Enable IPCompression
Accept unencrypted ID and HASH payloads in IKEv1 Main Mode -
Please upgrade to the next coming snapshot and re-test.
-
I did:
2.2-RC (amd64)
built on Tue Jan 13 09:02:41 CST 2015but still same issue.
-
This is the latest one that you should be on actually.
built on Tue Jan 13 14:58:02 CST 2015But can you be more detailed on what is not working.
-
It is still all the same errors as documented in the above posts.
What else can I deliver you ?netstat -f inet -sp esp
esp: 0 packets shorter than header shows 0 packets dropped; protocol family not supported 0 packets dropped; no TDB 0 packets dropped; bad KCR 0 packets dropped; queue full 0 packets dropped; no transform 0 packets dropped; bad ilen 0 replay counter wraps 0 packets dropped; bad encryption detected 0 packets dropped; bad authentication detected 0 possible replay packets detected 0 packets in 0 packets out 0 packets dropped; invalid TDB 0 bytes in 0 bytes out 0 packets dropped; larger than IP_MAXPACKET 0 packets blocked due to policy 0 crypto processing failures 0 tunnel sanity check failures -
If there's nothing else I can do, I would switch back to 2.1.5 :(
-
we switched back to strongswan 5.2.1 yesterday after some issues with 5.2.2 (the change to which coincides with the date of the problems you're seeing). Upgrade to the latest available now and let us know.
-
thanks again for you hard work !
Updated on:
built on Thu Jan 15 12:12:32 CST 2015But still seeing half open connections deleted and no tunnels are connected.
-
Can you post your rules.debug and ipsec.conf?
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.