DHCP no free leases
-
That's how you have it set. That's how it should be working.
Note that those settings take effect when the lease is obtained so if you just changed it it will take some time to take effect.
Status > DHCP Leases shows you the current leases. Do they not look right?
-
It shows 423 online&active and same time I am getting same alarm :(.
Well when before this topic I cleaned dhcpd.leases file but it got filled with old data again.
-
What shows 423 online and active? The DHCP leases?
You have to account for the offline leases that haven't expired yet. As far as I know, Status > DHCP Leases shows a lease as offline if there is no corresponding ARP entry, meaning the IP has dropped off the network.
Obviously you need a bigger lease pool.
-
Thanks for info.
So I will change network range then.
Let's see what will happen. -
Hi all,
Very strange - CP shows me only 40 active users.
But I am getting same syslog again.Despite there are almost 1000 free IP addresses.
-
How do you know what addresses are free?
-
You mean, even though if CP will disconnect them, they will use IP address till lease time?
-
Of course. CP has nothing to do with DHCP. They have to play together nicely and be set up in a complementary fashion but one doesn't influence the other. Look into those dhcp status scripts I posted earlier.
-
Well my CP set for 59 minutes, so I should set DHCP lease time also 59 minutes.
Then I think lease/pool will be freed correctly.Yes I saw your post, I had difficulties installed in into pfSense, as there some library dependencies. I will try again :)
-
What CP is set for 59 minutes? In these matters specifics count.
-
And FWIW I didn't hassle trying to get the DHCP status running on pfSense - screw with your router as little as possible. I got it running on my Mac and scp'd the leases file over and ran it there occasionally until I was confident I had things right. If you don't have a Unix host to run things like this, install Linux, FreeBSD, or even pfSense on something else and install stuff on that.
-
Hi,
I changed DHCP lease time, you can see CP and DHCP configurations.
Seem I do not get same log, but I am getting another one now :)
See attachment syslog.jpg
-
Those happen. They appear harmless.
There is no use having an idle timeout of 59 with a hard timeout of 59. Are you sure your idle timeout of 59 isn't good enough? That means a user who is gone from your network for 59 minutes is logged out.
What are your goals for your captive portal?
-
Well I think my answer to this question will help "me" :)
I want user to login CP (with provided user/password), after 59 min user should disconnected. Also to release/free IP address which he took.
So maybe he will not re login after disconnect (59).Thanks for help.
-
Well I think my answer to this question will help "me" :)
I want user to login CP (with provided user/password), after 59 min user should disconnected.
The hard timeout will do that.
Also to release/free IP address which he took.
Captive portal happens after a DHCP lease has happened. Every device can get and keep a DHCP lease whether or not they even try to get on the internet or even look at the captive portal.
So maybe he will not re login after disconnect (59).
That is a function of whatever authentication backend you're using for captive portal. Not DHCP.
This is all assuming open, not WPA, Wi-Fi.
