Setup Serial Port

sebjsp

Hello,

Am having a problem on the passage in 2.2, I have a problem when I try to setup my case.

When I boot my CF card, Pfsense starts and wonder: Do you want to set up VLANs now [y | n] ?, not enter Y / N

I am logged in Serial> USB, and I can not confirm with Y or N, putty does not send the order, I tried with two different PCs, 11250 in speed and 9600, several different versions of the problem and Pfsense is always the same.

I tried with version: 2.1.5-RELEASE-pfSense-4g-i386-nanobsd.img, which was installed before, I have a similar case has ithttp://www.ebay.com/itm/Pfsense-2-1-5-Mini-ITX-Firewall-Router-1-WAN-3-LAN-60GB-Disk-Drive-/321647170254?pt=US_Firewall_VPN_Devices&hash=item4ae3aa52ce and I turn on W7.

NB: Before that, I have already connected via the console port and inserting text functioned

Have you ever encountered this problem?

Thank you in advance,
Sébastien.A

stephenw10

Which 2.2 image are you putting on the CF card exactly?

The 2.1.5 image booted OK?

Steve

sebjsp

I tried with the 2.2 and 2.1.5 versions.

Before I had version 2.1.5 which worked

![Snap 2015-01-28 at 12.51.44.png](/public/imported_attachments/1/Snap 2015-01-28 at 12.51.44.png)
![Snap 2015-01-28 at 12.51.44.png_thumb](/public/imported_attachments/1/Snap 2015-01-28 at 12.51.44.png_thumb)

stephenw10

The 2.2 image you tried was also the 32bit, 4GB Nano image?

sebjsp

Yes, pfSense-2.2-RELEASE-4g-i386-nanobsd .img and 2.1.5-RELEASE-pfSense-4g-i386-nanobsd.img