PfSense - Hurricane Electric - Tunnel Broker Setup
-
You don't want it on the LAN?
Is your client ipv4 address in HE matching your WAN IP?
I gave /64 to each physical interface (except WAN) and each openvpn interface for myself.
-
I dont understand what you mean by creating a Gateway? Are you talking about editing the gateway address for the existing 'HEIPV6_TUNNELV6' gateway?
Also the created interface for the tunnel is 'heIPv6' not opt1, are you referring to something else?
-
I didn't see you renamed it. Yes, assign the IPv6 static config to your HeIPv6 interface.
-
i have a google hangout if anyone wants to join to help out, https://plus.google.com/hangouts/_/guo7p5otgva35aq22jly7itrpqa
-
on the gateway you have as HEIPV6_TUNNELV6 change the address from dynamic to your interface ::1
-
done
-
You don't want it on the LAN?
Is your client ipv4 address in HE matching your WAN IP?
I gave /64 to each physical interface (except WAN) and each openvpn interface for myself.
We just need to get the tunnel and it's assigned interface up so he can ping his ::1 at hurricane. Then we can dole out /64s out of his shiny new /48 to his local interfaces.
-
on the gateway you have as HEIPV6_TUNNELV6 change the address from dynamic to your interface ::1
received an error…
-
What did you do on the interface then? Needs to be the ::2 /64
-
-
That shouldn't be complaining.
Is the tunnel up? Can you ping6 your ::1? It'll only work from pfSense itself.
-
Back in 45 minutes. Gotta roll.
-
That shouldn't be complaining.
Is the tunnel up? Can you ping6 your ::1? It'll only work from pfSense itself.
-
In System: Gateways: Edit gateway > gateway, I have no IP. Its set to dynamic
In my HE IPV6 interface, I have none and none for my IPv4 and IPV6 configuration.
I'm still interested to know… Is the client IP at the HE website the same as your current WAN IP?
-
In System: Gateways: Edit gateway > gateway, I have no IP. Its set to dynamic
In my HE IPV6 interface, I have none and none for my IPv4 and IPV6 configuration.
I'm still interested to know… Is the client IP at the HE website the same as your current WAN IP?
Yes, the HE client ipv4 address is my WAN ipv4 address.
-
Reboot and see if things change/
-
-
Mine is also a /48 - Never did a /64
I also have RADVD configured.
-
You still can't set the gateway to 2001:470:1f0e:d8e::1 ?
If not something is confused. Maybe delete the IPv6 interface and reconfig it or maybe restart.
-
Mine is also a /48 - Never did a /64
I also have RADVD configured.
I think it's automatic. I have a /64 I'm not using and can't give back. I figure he might as well config a /48 from the get-go. It don't cost nothin'.
