Problem with squid after 2.1.5 fresh install

firefox · Feb 3, 2015, 3:36 PM

After that pfsense 2.2
Did not work right

I removed it and installed 2.1.5

I reinstalled the packages that I had

Everything works well
Apart from squid

For some reason
Works on and off

:( :( :(

All settings are identical to previous
I used the backup tool

config-home.plex-20141227195341

marcelloc · Feb 4, 2015, 2:34 AM

No info, just a doesn't work? ???

This way is almost impossible to help.

firefox · Feb 4, 2015, 4:25 AM

You're right
Sorry

But what information to give ?
This new installation

Maybe this will help

firefox · Feb 5, 2015, 4:33 AM

@marcelloc:

No info, just a doesn't work? ???

This way is almost impossible to help.

What information is needed ?

Tell me and I will write

How do I arrange it

It should work exactly the same settings as before formatting

I used a backup option

Before formatting everything worked well

If it's the same settings
Even now everything should work well
But not

KOM · Feb 5, 2015, 2:07 PM

Go to System - Packages. Go to the entry for Squid that you have installed. Click the small PKG button to reinstall it. It should now work.

firefox · Feb 5, 2015, 3:12 PM

I tried this option
It is the same situation
No change

KOM · Feb 5, 2015, 3:17 PM

Sorry, thought you were still on 2.2.

What information is needed ? Tell me and I will write

Transparent or standard mode? How does it not work, exactly? Are there any error messages? Did you change any options on any of the Squid tabs? How are you testing? Which browser are you using?

firefox · Feb 5, 2015, 4:12 PM

Which browser are you using?

I use Fire Fox

Transparent or standard mode ?

Transparent

Are there any error messages?

where can i see error messages ?

Did you change any options on any of the Squid tabs?

no
It's just like the picture
Just like before formatting when it worked

How are you testing?

I did not understand this question

KOM · Feb 5, 2015, 5:57 PM

where can i see error messages ?

Status - System logs - General

Also, look at the Squid logs that you can find in /var/squid/logs. Do you have anything of note in either cache.log or access.log?

firefox · Feb 5, 2015, 6:09 PM

Feb 5 20:01:59 	php: /diag_logs.php: Successful login for user 'admin' from: 192.168.0.2
Feb 5 20:01:59 	php: /diag_logs.php: Successful login for user 'admin' from: 192.168.0.2
Feb 5 20:01:39 	squid[54001]: Exiting due to repeated, frequent failures
Feb 5 20:01:39 	kernel: pid 88906 (squid), uid 62: exited on signal 6
Feb 5 20:01:39 	squid[54001]: Squid Parent: child process 88906 exited due to signal 6
Feb 5 20:01:39 	squid[88906]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:01:38 	squid[54001]: Squid Parent: child process 88906 started
Feb 5 20:01:35 	squid[54001]: Squid Parent: child process 88492 exited due to signal 6
Feb 5 20:01:36 	kernel: pid 88492 (squid), uid 62: exited on signal 6
Feb 5 20:01:35 	squid[88492]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:01:35 	squid[54001]: Squid Parent: child process 88492 started
Feb 5 20:01:34 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:01:34 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:01:34 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:01:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:01:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:01:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:01:32 	kernel: pid 76606 (squid), uid 62: exited on signal 6
Feb 5 20:01:32 	squid[54001]: Squid Parent: child process 76606 exited due to signal 6
Feb 5 20:01:32 	squid[76606]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:01:32 	squid[54001]: Squid Parent: child process 76606 started
Feb 5 20:01:30 	check_reload_status: Reloading filter
Feb 5 20:01:29 	Squid_Alarm[72921]: Squid has resumed. Reconfiguring filter.
Feb 5 20:01:29 	kernel: pid 71236 (squid), uid 62: exited on signal 6
Feb 5 20:01:29 	squid[54001]: Squid Parent: child process 71236 exited due to signal 6
Feb 5 20:01:29 	squid[71236]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:01:29 	check_reload_status: Reloading filter
Feb 5 20:01:29 	squid[54001]: Squid Parent: child process 71236 started
Feb 5 20:01:28 	Squid_Alarm[70911]: Reconfiguring filter...
Feb 5 20:01:26 	kernel: pid 54327 (squid), uid 62: exited on signal 6
Feb 5 20:01:26 	squid[54001]: Squid Parent: child process 54327 exited due to signal 6
Feb 5 20:01:26 	squid[54327]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:01:25 	squid[54001]: Squid Parent: child process 54327 started
Feb 5 20:01:25 	Squid_Alarm[52781]: Attempting restart...
Feb 5 20:01:25 	Squid_Alarm[52575]: Squid has exited. Reconfiguring filter.
Feb 5 20:00:39 	squid[17360]: Exiting due to repeated, frequent failures
Feb 5 20:00:39 	kernel: pid 50065 (squid), uid 62: exited on signal 6
Feb 5 20:00:39 	squid[17360]: Squid Parent: child process 50065 exited due to signal 6
Feb 5 20:00:39 	squid[50065]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:00:39 	squid[17360]: Squid Parent: child process 50065 started
Feb 5 20:00:36 	kernel: pid 49654 (squid), uid 62: exited on signal 6
Feb 5 20:00:36 	squid[17360]: Squid Parent: child process 49654 exited due to signal 6
Feb 5 20:00:36 	squid[49654]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:00:36 	squid[17360]: Squid Parent: child process 49654 started
Feb 5 20:00:35 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:00:35 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:00:35 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:00:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:00:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:00:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 20:00:33 	kernel: pid 39792 (squid), uid 62: exited on signal 6
Feb 5 20:00:33 	squid[17360]: Squid Parent: child process 39792 exited due to signal 6
Feb 5 20:00:33 	squid[39792]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:00:32 	squid[17360]: Squid Parent: child process 39792 started
Feb 5 20:00:30 	check_reload_status: Reloading filter
Feb 5 20:00:29 	kernel: pid 37034 (squid), uid 62: exited on signal 6
Feb 5 20:00:29 	squid[17360]: Squid Parent: child process 37034 exited due to signal 6
Feb 5 20:00:29 	squid[37034]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:00:29 	Squid_Alarm[38910]: Squid has resumed. Reconfiguring filter.
Feb 5 20:00:29 	squid[17360]: Squid Parent: child process 37034 started
Feb 5 20:00:28 	check_reload_status: Reloading filter
Feb 5 20:00:28 	Squid_Alarm[36468]: Reconfiguring filter...
Feb 5 20:00:25 	kernel: pid 17722 (squid), uid 62: exited on signal 6
Feb 5 20:00:25 	squid[17360]: Squid Parent: child process 17722 exited due to signal 6
Feb 5 20:00:25 	squid[17722]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 20:00:25 	squid[17360]: Squid Parent: child process 17722 started
Feb 5 20:00:25 	Squid_Alarm[16292]: Attempting restart...
Feb 5 20:00:25 	Squid_Alarm[15926]: Squid has exited. Reconfiguring filter.
Feb 5 20:00:02 	php: sarg.php: The command 'export LC_ALL=C && /usr/pbi/sarg-i386/bin/sarg ' returned exit code '1', the output was 'SARG: File not found: /var/log/squid/access.log'
Feb 5 20:00:01 	php: sarg.php: Sarg: force refresh now with args, compress(on) and none action after sarg finish.
Feb 5 19:59:38 	squid[91148]: Exiting due to repeated, frequent failures
Feb 5 19:59:38 	kernel: pid 8568 (squid), uid 62: exited on signal 6
Feb 5 19:59:38 	squid[91148]: Squid Parent: child process 8568 exited due to signal 6
Feb 5 19:59:38 	squid[8568]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 19:59:38 	squid[91148]: Squid Parent: child process 8568 started
Feb 5 19:59:35 	kernel: pid 7864 (squid), uid 62: exited on signal 6
Feb 5 19:59:35 	squid[91148]: Squid Parent: child process 7864 exited due to signal 6
Feb 5 19:59:35 	squid[7864]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 19:59:35 	squid[91148]: Squid Parent: child process 7864 started
Feb 5 19:59:34 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 19:59:34 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 19:59:34 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 19:59:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 19:59:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 19:59:33 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Feb 5 19:59:32 	kernel: pid 98141 (squid), uid 62: exited on signal 6
Feb 5 19:59:32 	squid[91148]: Squid Parent: child process 98141 exited due to signal 6
Feb 5 19:59:32 	squid[98141]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 19:59:31 	squid[91148]: Squid Parent: child process 98141 started
Feb 5 19:59:30 	check_reload_status: Reloading filter
Feb 5 19:59:29 	Squid_Alarm[96538]: Squid has resumed. Reconfiguring filter.
Feb 5 19:59:28 	kernel: pid 95045 (squid), uid 62: exited on signal 6
Feb 5 19:59:28 	squid[91148]: Squid Parent: child process 95045 exited due to signal 6
Feb 5 19:59:28 	squid[95045]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 5 19:59:28 	check_reload_status: Reloading filter
Feb 5 19:59:28 	squid[91148]: Squid Parent: child process 95045 started
Feb 5 19:59:28 	Squid_Alarm[94263]: Reconfiguring filter...
Feb 5 19:59:25 	kernel: pid 91391 (squid), uid 62: exited on signal 6
Feb 5 19:59:25 	squid[91148]: Squid Parent: child process 91391 exited due to signal 6
Feb 5 19:59:25 	squid[91391]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.

look at the Squid logs that you can find in /var/squid/logs. Do you have anything of note in either cache.log or access.log?

how do i see this ?

KOM · Feb 5, 2015, 6:30 PM

Feb 5 19:59:32 squid[98141]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.

how do i see this ?

pfSense is built on FreeeBSD. Use the 8) Shell option from the console to get to a command prompt. Never mind access.log and cache.log for now. What happens when you shell in and run squid -z?

marcelloc · Feb 5, 2015, 6:54 PM

First screenshots show a running squid and havp stopped.

I suggest you testing a daemon/package at a time.

firefox · Feb 5, 2015, 7:00 PM

@KOM:

Feb 5 19:59:32 squid[98141]: Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.

how do i see this ?

pfSense is built on FreeeBSD. Use the 8) Shell option from the console to get to a command prompt. Never mind access.log and cache.log for now. What happens when you shell in and run squid -z?

it worked
I remember this command
To my knowledge
I used the command after power failure

@marcelloc:

First screenshots show a running squid and havp stopped.

I suggest you testing a daemon/package at a time.

after i used```
squid -z

firefox · Feb 5, 2015, 7:02 PM

@marcelloc:

First screenshots show a running squid and havp stopped.

I suggest you testing a daemon/package at a time.

how do i do that ?

marcelloc · Feb 5, 2015, 7:05 PM

@firefox:

how do i do that ?

Disable HAVP integration and test squid package only.

Once you get it working, test havp.

firefox · Feb 5, 2015, 7:35 PM

@marcelloc:

@firefox:

how do i do that ?

Disable HAVP integration and test squid package only.

Once you get it working, test havp.

I guess I've done it
That's the only way I had Internet access
Only I did not know
The test is done like this

thank you both