L2tp + IPsec on PFsense 2.2

d-ron23

I seen that there was another topic out there but reading through it I was unable to fix my problem.

Okay so I setup a L2TP + IPsec VPN following the documentation posted on the main website. When I go to connect with any device, It will connect and show in the logs that it is connecting, then just disconnect. I attached the log in a text file so that you can maybe interpret it better than me. My firewall does have outbound rules configured for the VPN just for more info.
[Connect Disconnect log.txt](/public/imported_attachments/1/Connect Disconnect log.txt)

ajeeb

am not that pro ! but I have already stable IPsec VPN !
but my q. maybe u forget this rule ?
and as a start try revert everything and try 1st IPSEC … and check if it's works then next ! step by step :D

![Screen Shot 2015-02-07 at 17.32.39.png](/public/imported_attachments/1/Screen Shot 2015-02-07 at 17.32.39.png)
![Screen Shot 2015-02-07 at 17.32.39.png_thumb](/public/imported_attachments/1/Screen Shot 2015-02-07 at 17.32.39.png_thumb)

d-ron23

What are your l2tp IP settings like? as far as server ip and remote address range