Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Pfsense + Wifi AP= Wifi only working if wired PC is turned on

    Scheduled Pinned Locked Moved General pfSense Questions
    2 Posts 2 Posters 777 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M Offline
      muelli
      last edited by

      Hi guys

      Some days ago I set up my very first pfsense. My pfsense is running on a APU Board. My network is set up as shown below:

      WAN – Modem -- pfsense -- Switch (Netgear) -- Asus Wifi AP

      There are also some wired connections to the switch (e.g. my PC). With the wired clients everything works fine, I have a 250mbps connection to the wan with these clients.

      But my wifi doesn't work. And now here comes the strange part (I am computer scientist and I've never seen something like this before). The Asus AP does only have connection to the pfsense if my wired PC is turned on. When I shut down my PC, the wifi won't work anymore.

      Switch is connected to the lan port of my pfsense. The lan interface is 192.168.1.200. The AP is connected to the switch. On the AP, I plugged the cable into the LAN Port. AP gets his LAN-Settings via DHCP (is all in same subnet). My DHCP is handled by pfsense, at Asus AP the DHCP Server is disabled.

      I can see my Wifi and I am able to connect to it with my laptop. But the AP does not find the way to the pfsense. There are a lot of ARP Request outgoing from my Notebook (who has 192.168.1.200? tell 192.168.1.18) but there is no answer.

      If I boot up my wired PC, my laptop gets immediatly a response (192.168.1.200 is at xx:xx:xx:xx:xx:xx). From now on my Wifi works well, I get 200mbps via 5ghz.

      But if I turn off my wired pc, after 1-2 minutes my wifi wont work anymore and all wifi clients are sending ARP Request again with "who as ...1.200" .

      So my Wifi AP can only connect to the pfsense if my wired pc is turned on.

      Does anyone have any guesses? I really don't know what to do, I've never had such a problem before..

      thanks in advance

      ps: please excuse my english

      1 Reply Last reply Reply Quote 0
      • M Offline
        muswellhillbilly
        last edited by

        I'm not familiar with the Negtear switch or the Asus AP, but I think it sounds a little odd that your AP is picking up it's IP via DHCP. In most cases you should set the IP on an access point statically, at least in my experience. Have a go at assigning a permanent IP to the Asus AP and see if that has any effect.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.