TUNNEL Established but no connection using assigned IP.



  • Hello All,

    Am experiencing an issue ,its as follows a VPN Tunnel was established between a cisco device and pfSense ,but the IP that is to be used for connection via another device e.g P.O.S Terminal is not connecting using an assigned IP. Natting the IP have been done on the pfSense and all port were made available. Pls will appreciate any useful suggestion to assist in this regard.



  • Is an IPsec tunel? if so, have you add firewall rules on IPsec interfaces?
    You can monitoring with tcpdump to see if the packets are going to each end.
    (tcpdump -nni [interface])


Log in to reply