What is the biggest attack in GBPS you stopped

Supermule

Snort is not the issue since it didnt matter if it was there or not.

I wanted Snort on the testbox because its nice and I wanted to test it to see if it did somthing bad/good in regards to the overall load on the box.

When one core hits 100% its gone….

firewalluser

Well lots of possibilities but imo until we can get Dtrace working on a pfsense machine its going to be guess work for now.

Supermule

EDIT: Rant over…

firewalluser

Any reason why?

Perhaps they feel Dtrace is not the best tool for the job?
Maybe too busy in the short term?
Some other reason?

It still doesnt stop us from having a go though does it?

tim.mcmanus

@Supermule:

Yes and the dev's dont want to help at all.

Devs have helped.

almabes

@tim.mcmanus:

@Supermule:

Yes and the dev's dont want to help at all.

Devs have helped.

I agree with Tim, here. I started a conversation with the Devs last week. Not going into it completely on this thread though.
Long and the short of it was:

A) We have a mismatch of problem and solution (DoS attack and Stateful packet filtering device)
B) We need to recreate the problem on FreeBSD 10.1-RELEASE. (Something I am working on with Supermule)
C) DTrace will help locate the issue, and the quickest way to get it going is on a stock FreeBSD box.

The message from devs was also educational as to the architecture of BSD in general, and FreeBSD specifically.

When we isolate the issue, I will release documentation. Keep your pants on. If you can help with tracing or logging, or configuring pf then help me. It'll help the community get the desired results (pfSense more resistant to nefarious scripts) much quicker.

Supermule

https://forum.pfsense.org/index.php?topic=24337.0

Very interesting thread!

Do we have any that have something else than em driver nics on the boxes?

tim.mcmanus

@Supermule:

https://forum.pfsense.org/index.php?topic=24337.0

Very interesting thread!

Do we have any that have something else than em driver nics on the boxes?

So it's a driver and an OS issue, you don't say? ;D

Supermule

We dont know yet since we have tuned the damn thing hence a lot of numbers dont add up in the default settings in pfsense.

So we are working on it :D

tim.mcmanus

I do think the last link you posted was excellent with a lot of good discussion, and it might be worth testing non-em boxes. All of my interfaces are em's, so I won't be able to help.

firewalluser

I've got a usb2 10/100 plugable.com usb nic currently on my wan interface which I can swap with a gigabit usb3 plugable.com usb nic if need be as well as a sole onboard intel nic built into my little Intel D847 dual core celeron with 8Gb of ram and 30Gb msata ssd, so I can test all 3 formats to see how the different network drivers work on the same system by reassigning the wan interface. Avg CPU load is between 30-40% since installing the latest version of snort on it the other day so it should fall over quite quickly without any system tuning if this thread is anything to go by.

I can do it tomorrow later on in the morning as have appointments first thing as I've now found about about dangling states which was holding me up.

tim.mcmanus

@firewalluser:

I've got a usb2 10/100 plugable.com usb nic currently on my wan interface which I can swap with a gigabit usb3 plugable.com usb nic if need be as well as a sole onboard intel nic built into my little Intel D847 dual core celeron with 8Gb of ram and 30Gb msata ssd, so I can test all 3 formats to see how the different network drivers work on the same system by reassigning the wan interface. Avg CPU load is between 30-40% since installing the latest version of snort on it the other day so it should fall over quite quickly without any system tuning if this thread is anything to go by.

I can do it tomorrow later on in the morning as have appointments first thing as I've now found about about dangling states which was holding me up.

Make sure you know exactly which drivers are loading up to support the interface. Some commands to run in FreeBSD to help:


pciconf -lv

That will list the interfaces and classify them for you. Also go to /var/log/dmesg.boot to see your last boot log. You'll see a section in there that will look something like this:


em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0xf060-0xf07f mem 0xf7c00000-0xf7c1ffff,0xf7c38000-0xf7c38fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
ehci0: <intel panther="" point="" usb="" 2.0="" controller="">mem 0xf7c37000-0xf7c373ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <intel panther="" point="" hda="" controller="">mem 0xf7c30000-0xf7c33fff irq 22 at device 27.0 on pci0
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
em1: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0xe000-0xe01f mem 0xf7bc0000-0xf7bdffff,0xf7b00000-0xf7b7ffff,0xf7be0000-0xf7be3fff irq 16 at device 0.0 on pci1
em1: Using MSIX interrupts with 3 vectors
pcib2: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0
pci2: <acpi pci="" bus="">on pcib2
em2: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0xd000-0xd01f mem 0xf7ac0000-0xf7adffff,0xf7a00000-0xf7a7ffff,0xf7ae0000-0xf7ae3fff irq 16 at device 0.0 on pci2
em2: Using MSIX interrupts with 3 vectors
pcib3: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0
pci3: <acpi pci="" bus="">on pcib3
em3: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0xc000-0xc01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 18 at device 0.0 on pci3
em3: Using MSIX interrupts with 3 vectors</intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel></intel></intel(r)>

And of course the ever popular ifconfig.

FreeBSD loads NIC drivers (I think) from the kernel, so it might take some hunting to determine which ones are being used.

fsansfil

Who can hit me with the attack? There are few scenarios I would like to see how they respond. Can someone PM or email with available timezone so we could try a few of them ?

F.

almabes

@fsansfil:

Who can hit me with the attack? There are few scenarios I would like to see how they respond. Can someone PM or email with available timezone so we could try a few of them ?

F.

Supermule can execute the attack. He's UTC + 1.

Supermule

My skype name is: kontaktnetsupply

Its a lot easier that way :)

firewalluser

Just be aware everything you give out over Skype will be investigated by MS as per the Skyper agreement before you installed Skype, which means any web addresses, private ip addresses will see at least the Bing bot turning up at.

Supermule

I know mate.

:)

Exactly the reason why I removed my webcam and microphone :D

The material shared over skype has nothing valuable in it.

firewalluser

@tim.mcmanus:

Make sure you know exactly which drivers are loading up to support the interface. Some commands to run in FreeBSD to help:
[b]pciconf -lv[/b]

em0@pci0:0:25:0: class=0x020000 card=0x20448086 chip=0x15038086 rev=0x04 hdr=0x00
class = network
subclass = ethernet

The usb nics are not visible only the USB hubs they are plugged into.

That will list the interfaces and classify them for you. Also go to /var/log/dmesg.boot to see your last boot log. You'll see a section in there that will look something like this:

Motherboard nic
em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0xf080-0xf09f mem 0xf7c00000-0xf7c1ffff,0xf7c29000-0xf7c29fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt

Usb nics ue0 to ue3 same as below have not plugged in the gigabit ones yet.

ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 16 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <usb ethernet="">on axe0

And of course the ever popular ifconfig.

FreeBSD loads NIC drivers (I think) from the kernel, so it might take some hunting to determine which ones are being used.

em0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
options=4209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso>ether
inet6 em0 prefixlen 64 scopeid 0x1
inet 192.168.37.1 netmask 0xffffff00 broadcast 192.168.37.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
ue0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
options=80008 <vlan_mtu,linkstate>ether
inet6 ue0 prefixlen 64 scopeid 0x6
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ue1: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
options=80008 <vlan_mtu,linkstate>ether
inet6 ue1 prefixlen 64 scopeid 0x7
inet 192.168.60.1 netmask 0xffffff00 broadcast 192.168.60.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ue2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
options=80008 <vlan_mtu,linkstate>ether
inet6 ue2 prefixlen 64 scopeid 0x8
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ue3: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
options=80008 <vlan_mtu,linkstate>ether
inet6 ue3 prefixlen 64 scopeid 0x9
inet 192.168.50.50 netmask 0xffffff00 broadcast 192.168.50.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active

If you need any other info let me know.

Supermule if you want to hit me up, my ip is currently 92.29.124.124, VMware is recording the dashboard so traffic graphs for the interfaces, system activity and Status: System logs: Firewall (Dynamic View), with packet capture running on wan. Current CPUP load is 41 as if with nothing really happening other than those browser windows running along with snort so off to make a cup of tea. ;)</full-duplex></performnud,auto_linklocal></vlan_mtu,linkstate></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></vlan_mtu,linkstate></up,broadcast,running,simplex,multicast></full-duplex></performnud,auto_linklocal></vlan_mtu,linkstate></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></vlan_mtu,linkstate></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></usb></generic></intel(r)>

firewalluser

Oh and whilst I remember, the wan interface is currently one of the USB nics, the EM0 (Intel nic) using the same drivers as you guys reporting problems is the lan interface so this first test will in effect be a driver test before I swap the wan on the EM0 nic.

Supermule

Hitting you up on port 80 :)

Is it pingable and NAT'ing to something behind it?