Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Traffic is going to WAN qOthersDefault?

    Traffic Shaping
    3
    7
    1.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • K
      kripz
      last edited by

      Heres a quick traffic capture on the WAN interface:

      11:11:41.943715 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.944190 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101
11:11:41.952465 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.953709 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.954131 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101
11:11:41.961211 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.962458 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.962868 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101
11:11:41.974631 IP my.wan.ip.address.11137 > dunno.443: tcp 0
11:11:41.982340 IP dunno.443 > my.wan.ip.address.43826: tcp 233
11:11:41.982518 IP my.wan.ip.address.43826 > dunno.443: tcp 0
11:11:41.983585 IP dunno.443 > my.wan.ip.address.43826: tcp 46
11:11:41.983730 IP my.wan.ip.address.43826 > dunno.443: tcp 0
11:11:41.983846 IP my.wan.ip.address.43826 > dunno.443: tcp 46
11:11:41.985865 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101
11:11:41.986207 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.987468 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.987596 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:41.988631 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101
11:11:42.019965 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:42.022456 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:42.022843 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101
11:11:42.023719 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:42.024960 IP vpn.provider.ip.address.53 > my.wan.ip.address.29897: UDP, length 1445
11:11:42.025329 IP my.wan.ip.address.29897 > vpn.provider.ip.address.53: UDP, length 101

      Looks like my VPN traffic to/from my local machine of ip 192.168.1.100 is being put into qOthersDefault when this traffic should be qP2P.
      I've just used the wizard with PRIQ on both interfaces.

      Heres is my rules (all default):

      1 Reply Last reply Reply Quote 0
      • N
        Nullity
        last edited by

        Remember the fundamentals; floating rules are last-matched applies, interface is first-match, and if you use NAT that outgoing/b] traffic on WAN will have switched to your WAN IP..

        Please correct any obvious misinformation in my posts.
        -Not a professional; an arrogant ignoramous.

        1 Reply Last reply Reply Quote 0
        • K
          kripz
          last edited by

          @Nullity:

          Remember the fundamentals; floating rules are last-matched applies, interface is first-match, and if you use NAT that **outgoing/b] traffic on WAN will have switched to your WAN IP..

          So i put my VPN hosts IP, udp port 53 as destination as a floating rule right down the bottom and it had no effect.

          Just to clarify, the WAN queue is uploads?**

          1 Reply Last reply Reply Quote 0
          • N
            Nullity
            last edited by

            @kripz:

            @Nullity:

            Remember the fundamentals; floating rules are last-matched applies, interface is first-match, and if you use NAT that **outgoing/b] traffic on WAN will have switched to your WAN IP..

            So i put my VPN hosts IP, udp port 53 as destination as a floating rule right down the bottom and it had no effect.

            Just to clarify, the WAN queue is uploads?

            I have no experience with a VPN or it's peculiarities, so I would just be guessing why your rules are non-functioning. :\

            WAN queue is usually upload, yeah.**

            Please correct any obvious misinformation in my posts.
            -Not a professional; an arrogant ignoramous.

            1 Reply Last reply Reply Quote 0
            • KOMK
              KOM
              last edited by

              The snippet you showed only has DNS and HTTPS traffic, and your rules have those set to go to qOthersHigh.  Something else is being sent to qOthersDefault.

              1 Reply Last reply Reply Quote 0
              • K
                kripz
                last edited by

                @KOM:

                The snippet you showed only has DNS and HTTPS traffic, and your rules have those set to go to qOthersHigh.  Something else is being sent to qOthersDefault.

                VPN server listens on port 53 and uses UDP, that was VPN traffic.
                HTTPS was just me looking at google i think, i cant remember where the ip pointed to.

                Is it possible to find out what is being sent to qOthersDefault?

                1 Reply Last reply Reply Quote 0
                • KOMK
                  KOM
                  last edited by

                  Keep sniffing while the queue is active and see which ports are triggering the rule.

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post