Intel Mini-ITX Atom 8-core Hardware Build Recipe Available Here
-
AmaZing, much appreciated :D
-
@Justin0:
There seems to be a USB3 header on the motherboard. How do you connect it to the front panel USB 2 port?
Can't with the built in panel. However you could attach this to the front:
[http://www.picco.nl/catalog/images/A41865.jpg]http://www.picco.nl/catalog/product_info.php/cPath/534_542/products_id/5586
](http://www.picco.nl/catalog/product_info.php/cPath/534_542/products_id/5586[img)or
[http://www.bilder.delock.de/produkte/thumb/4f3d31bf45e482.11415395.jpg]http://www.delock.de/produkte/G_83095/merkmale.html?setLanguage=en
](http://www.delock.de/produkte/G_83095/merkmale.html?setLanguage=en<br)Don't think that extension cable would work. The motherboard and the panel are both male sockets, so a female to female cable is required. Is such a cable available?
-
Don't think that extension cable would work.
The blue end of the cable is connected to the board and the other end to the two USB port unit.
-
looks like this Delock USB 3.0 header is very available in EU, but I can't seem to find it on US internet shops.
-
I generally don't have a problem shipping from EU to US, but shipping costs may be prohibitive.
-
I've got one like this operating perfectly:
It extends only the USB2 part of the USB3 header on the motherboard. If you need USB3 speed on the front panel, you need to change sockets/board on the case - or better, buy a case with USB3 ports on the front panel.
-
I've got one like this operating perfectly:
It extends only the USB2 part of the USB3 header on the motherboard, forward to the cable going to the front panel. If you need USB3 speed on the front panel, you need to change sockets/board on the case - or better, buy a case with USB3 ports on the front panel.
-
@Justin0:
There seems to be a USB3 header on the motherboard. How do you connect it to the front panel USB 2 port?
Can't with the built in panel. However you could attach this to the front:
[http://www.picco.nl/catalog/images/A41865.jpg]http://www.picco.nl/catalog/product_info.php/cPath/534_542/products_id/5586](http://www.picco.nl/catalog/product_info.php/cPath/534_542/products_id/5586[img)or
[http://www.bilder.delock.de/produkte/thumb/4f3d31bf45e482.11415395.jpg]http://www.delock.de/produkte/G_83095/merkmale.html?setLanguage=en
](http://www.delock.de/produkte/G_83095/merkmale.html?setLanguage=en<br)The face plate on m350 also has a power button. Thus it is longer than the usb header you have posted. So this header is not a replacement for the original face plate.
-
Ah, you are right. Certainly don't want to lose the power button on the front.
-
A little more creativity guys! 8) Most usb wifi sticks are pretty short, most likely one can rig up the usb board via double side sticky tape, or drill and secure to the internal case yet have enough space. Or desolder the usb 2 on board, and wire up a usb 3.
-
Actually, there's no reason to use any USB3 feature with pfSense. There may be boot problems, for example, booting a memstick image from a USB3 stick in a USB3 port may lead to unpredictable results, since USB3 needs a special driver, which may not be available during boot… after all, pfSense is a network appliance, USB2 should be more than enough.
The adapter cable we just showed above is a perfectly elegant and cost effective solution to have USB2 ports extended to the front panel connectors. I am using it without any issues.
-
@rob Did you take off the usb face plate? Pictures?
-
No. Why would I?
The face plate has a cable with an 9-pin female plug hanging inside the box, waiting to be plugged into a USB2 header on the motherboard. This motherboard doesn't have such a header. It only has a USB3 (blue) header.
Pay close attention to this photo:
The blue end is female and plugs into the motherboard.
The smaller black end is unusually male, and plugs into the cable going towards the faceplate on the case. These two cables connect to each other. -
"The smaller black end is unusually male, and plugs into the cable going towards the faceplate on the case. These two cables connect to each other."
The above sentence was the key. Now it is clear!. You do use the original cable which shipped with the case.
-
Yes!
-
I have a very similar SuperMicro board (the A1SRM-2758F), which I use as a PBX and was uncomfortable with the CPU temps as I was using it in a 3u Chassis (for telephony cards). I found that the CPU cooler shape is roughly compatible with a "Socket G" whatever that is with a 51mmx51mm mounting pattern.
I found that the Dynatron I2 Cooling Fan fan fits perfectly on this board.
http://www.amazon.com/gp/product/B004WMCX2UIt's not perfect, but it works pretty well compared to the stock fan-less heatsink.
Even when load-testing this system the temperature never really rises anymore.Just wanted everyone to know that this cooler is more or less compatible.
-
How did you screw it on?
-
Just completed building the specified hardware and memtest ran fine. I am able to power the system on using IPMI, but I am unable to power it on using the M350 front panel button.
I have the cable labeled Power SW connected to the motherboard's Power Buttton header. The cable labeled Power LED connected to the motherboard's FP PWRLED header.
Does it matter which pin the black or red wires are connected? I tried both and I can't power the unit up using the M350 front panel button.
-
Not sure if this is the same problem I ran into, but when I built mine, I looked at the header picture on the printout, and I was looking at it upside down, or the picture is upside down to how I was looking at the motherboard. So I ended up with wiring everything wrong. It took me a while to realize my mistake (or the printout's mistake :-)).
-
@Sir:
Not sure if this is the same problem I ran into, but when I built mine, I looked at the header picture on the printout, and I was looking at it upside down, or the picture is upside down to how I was looking at the motherboard. So I ended up with wiring everything wrong. It took me a while to realize my mistake (or the printout's mistake :-)).
Thank you. That is exactly my mistake too. I assumed the manual's orientation is correct if I looked at my motherboard in the same way. It turned out the manual's diagram is upside down. Now that the wiring is correct, things are working as expected. I can never figure which pin goes to the red wire and which pin goes to the black.
I have 3 Evercool 40mmX15mm PWM fans installed with 16GB (2x8GB). The fans are loud at boot, but then settle down to a whisper quiet 3000rpm. Its funny the DIMMA1 is 8 degrees Celsius cooler than DIMMB1 because DIMMA1 is under a fan.
I am running memtest on the RAM and will get to installing pfSense 2.2.3 sometime this week.
