Need some help with LSI 7404EP-LC
-
Hi i have a LSI7404EP-LC but it if i install it i get a error see link https://www.dropbox.com/sh/v35w4t512vxvvsj/AAB5QaassxxyZeniosn9OXsZa?dl=0
how can i fix this i really want a 4 channel fiber card i got now a 2 channel fiber cart it runs on a Dell R200
-
nobody who can help me :'( :'(
-
up :'( :'(
-
pfSense actually is based on FreeBSD 10.1, eventually you might be finding your controller named here on this
FreeBSD 10.1 hardware support listIf not listed there, it is likes all other OS and hardware, a driver must be there or it is not working.
-
ok thanks BlueKobold ;)
i have found out that i need the fusion mpt true the manual that i have found here http://www.advancedaudiorentals.com/docs/4gbit_ug.pdf
the mpt from freebsd
https://www.freebsd.org/cgi/man.cgi?query=mpt&sektion=4
now is the question how to install it ???
-
now is the question how to install it
Install FreeBSD 10.1, and then have a look what kind of driver is loaded and then copy this .ko file
over to your pfSense based also on FreeBSD 10.1 and then try to load it at the boot time by editing
the loader.conf file and edit it and then past in the following line:mpt_load="YES"Safe and close the loader.conf file and create a loader.conf.local and place there this line of code in again
after an update or upgrade all files will be written new, also the loader.conf and then this line will be lost!!!
But with the loader.conf.local your custom made things will survive.
Where you have to place the mpt file in you must find out by your self I really don´t know it.
But be careful only copy files from and to;- 32Bit - to 32Bit and 64Bit to 64bit OS
- FreeBSD 10.1 to FreeBSD 10.1 based