Cannot get incoming email to mail server
-
Incoming email not getting to mail server - I reset states nothing hits the FW - I do not see anything in Logs for destination WAN or internal IP of mail server destination. Any ideas? I can send.
1:1 NAT of mail server
WAN 59.59.x.x 192.168.5.220 192.168.5.220 Email NAT
Port Forwarding for mail server
WAN TCP * 443 (HTTPS) WAN_email 443 (HTTPS) 192.168.5.220 443 (HTTPS) Mail HTTPS
WAN TCP * 993 (IMAP/S) WAN_email 993 (IMAP/S) 192.168.5.220 993 (IMAP/S) Mail IMAP/S
WAN TCP * 465 (SMTP/S) WAN_email 465 (SMTP/S) 192.168.5.220 465 (SMTP/S) Mail SMTP/S
WAN TCP * 25 (SMTP) WAN_email 25 (SMTP) 192.168.5.220 25 (SMTP) Mail SMTP
WAN TCP * 40809 WAN_email 40809 192.168.5.220 40809 Mail SSHPort forwarding configured w/ PureNat - and rules were automatically added to WAN INT on FW
These rules on on my WAN INT but they have internal IP added as Destination (rules were added automatically from PortForwarding)
IPv4 TCP * 443 (HTTPS) 192.168.5.220 443 (HTTPS) * none NAT Mail HTTPS
IPv4 TCP * 993 (IMAP/S) 192.168.5.220 993 (IMAP/S) * none NAT Mail IMAP/S
IPv4 TCP * 465 (SMTP/S) 192.168.5.220 465 (SMTP/S) * none NAT Mail SMTP/S
IPv4 TCP * 40809 192.168.5.220 40809 * none NAT Mail SSH
IPv4 TCP * 25 (SMTP) 192.168.5.220 25 (SMTP) * noneWhy can I not receive incoming email to my server with these settings - what am I missing.
-
No idea what are you trying to port-forward with 1:1 NAT. Makes no sense. Sounds like you never got the 1:1 NAT working: https://forum.pfsense.org/index.php?topic=94809.0 - not really sure what's the point in starting a new thread.
-
so i dont need to use port forwarding if using 1:1 NAT?
Just setup the NAT and then the firewall rules?
-
https://doc.pfsense.org/index.php/1:1_NAT
1:1 NAT, aka one-to-one NAT or binat, binds a specific internal address (or subnet) to a specific external address (or subnet). Incoming traffic from the Internet to the specified IP will be directed toward the associated internal IP. Outgoing traffic to the Internet from the specified internal IP will originate from the associated external IP.
-
yes I know what NAT does just not sure if
1 - I have to use port forwarding w/. NAT or just NAT w/ FW rules.
Can you delete this post - I will follow up with the other one - just posted screen shots there of my settings
-
Did you actually read at least the quoted part!? 1:1 NAT already sends all traffic to the configured host/subnet. Set up the 1:1 NAT and move on! (In fact, you are overriding the 1:1 NAT with port forwards, and screwing things up.)