PfSense 2.2.x Daily Kernel Panic "kernel: arpresolve: can't allocate llinfo"



  • Does anyone know what is happening? Every day pfSense gives this error… Not sure what is causing it. I noticed it happened with 2.2.2 and 2.2.3 (It may have been happening before 2.2.2 as well but I am not sure).

    Log:

    	php-fpm[28444]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use VPNV4.
    6/29/2015 13:30	check_reload_status: Reloading filter
    6/29/2015 13:30	check_reload_status: Restarting OpenVPN tunnels/interfaces
    6/29/2015 13:30	check_reload_status: Restarting ipsec tunnels
    6/29/2015 13:30	check_reload_status: updating dyndns VPNV4
    6/29/2015 13:30	php-fpm[10960]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:30	check_reload_status: Starting packages
    6/29/2015 13:30	php-fpm[61354]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.108.xxx.xxx -> 10.182.xxx.xxx - Restarting packages.
    6/29/2015 13:30	php-fpm[61354]: /rc.newwanip: Creating rrd update script
    6/29/2015 13:30	php-fpm[61354]: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you d
    6/29/2015 13:30	php-fpm[61354]: /rc.newwanip: IP has changed, killing states on former IP 10.108.xxx.xxx.
    6/29/2015 13:30	php-fpm[61354]: /rc.newwanip: rc.newwanip: on (IP address: 10.182.xxx.xxx) (interface: VPN2[opt2]) (real interface: ovpnc2).
    6/29/2015 13:30	php-fpm[61354]: /rc.newwanip: rc.newwanip: Info: starting on ovpnc2.
    6/29/2015 13:30	check_reload_status: rc.newwanip starting ovpnc2
    6/29/2015 13:30	kernel: ovpnc2: link state changed to UP
    6/29/2015 13:30	php-fpm[61354]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:30	php-fpm[61354]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:30	check_reload_status: Reloading filter
    6/29/2015 13:30	check_reload_status: Reloading filter
    6/29/2015 13:30	kernel: ovpnc2: link state changed to DOWN
    6/29/2015 13:22	php-fpm[97974]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use #2_VPNV4.
    6/29/2015 13:22	php-fpm[97974]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use VPNV4.
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	check_reload_status: Restarting OpenVPN tunnels/interfaces
    6/29/2015 13:22	check_reload_status: Restarting ipsec tunnels
    6/29/2015 13:22	check_reload_status: updating dyndns #2_VPNV4
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	check_reload_status: Restarting OpenVPN tunnels/interfaces
    6/29/2015 13:22	check_reload_status: Restarting ipsec tunnels
    6/29/2015 13:22	check_reload_status: updating dyndns VPNV4
    6/29/2015 13:22	php-fpm[1991]: /index.php: Successful login for user 'xxxx' from: 192.168.xxx.xxx
    6/29/2015 13:22	php-fpm[1991]: /index.php: Successful login for user 'xxxx' from: 192.168.xxx.xxx
    6/29/2015 13:22	php-fpm[1991]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:22	check_reload_status: Starting packages
    6/29/2015 13:22	php-fpm[1991]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.180.xxx.xxx -> 10.108.xxx.xxx - Restarting packages.
    6/29/2015 13:22	php-fpm[1991]: /rc.newwanip: Creating rrd update script
    6/29/2015 13:22	php-fpm: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:22	php-fpm: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:22	php-fpm[1991]: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you di
    6/29/2015 13:22	check_reload_status: Starting packages
    6/29/2015 13:22	php-fpm: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.100.xxx.xxx -> 10.100.xxx.xxx - Restarting packages.
    6/29/2015 13:22	php-fpm: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.100.xxx.xxx -> 10.100.xxx.xxx - Restarting packages.
    6/29/2015 13:22	php-fpm[1991]: /rc.newwanip: IP has changed, killing states on former IP 10.180.xxx.xxx.
    6/29/2015 13:22	php-fpm[1991]: /rc.newwanip: rc.newwanip: on (IP address: 10.108.xxx.xxx) (interface: VPN2[opt2]) (real interface: ovpnc2).
    6/29/2015 13:22	php-fpm[1991]: /rc.newwanip: rc.newwanip: Info: starting on ovpnc2.
    6/29/2015 13:22	check_reload_status: rc.newwanip starting ovpnc2
    6/29/2015 13:22	kernel: ovpnc2: link state changed to UP
    6/29/2015 13:22	php-fpm[1991]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:22	php-fpm: /rc.newwanip: Creating rrd update script
    6/29/2015 13:22	php-fpm: /rc.newwanip: Creating rrd update script
    6/29/2015 13:22	check_reload_status: Starting packages
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.XXX.XXX0 -> 45.XXX.XXX.XXX - Restarting packages.
    6/29/2015 13:22	php-fpm: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get
    6/29/2015 13:22	php-fpm: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get
    6/29/2015 13:22	php-fpm[1991]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm: /rc.newwanip: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm: /rc.newwanip: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm: /rc.newwanip: rc.newwanip: on (IP address: 10.100.xxx.xxx) (interface: VPN1[opt3]) (real interface: ovpnc1).
    6/29/2015 13:22	php-fpm: /rc.newwanip: rc.newwanip: on (IP address: 10.100.xxx.xxx) (interface: VPN1[opt3]) (real interface: ovpnc1).
    6/29/2015 13:22	php-fpm: /rc.newwanip: rc.newwanip: Info: starting on ovpnc1.
    6/29/2015 13:22	php-fpm: /rc.newwanip: rc.newwanip: Info: starting on ovpnc1.
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: Creating rrd update script
    6/29/2015 13:22	check_reload_status: rc.newwanip starting ovpnc1
    6/29/2015 13:22	kernel: ovpnc1: link state changed to UP
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: OpenVPN ID client2 PID 56047 still running, killing.
    6/29/2015 13:22	php-fpm: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: OpenVPN ID client1 PID 55300 still running, killing.
    6/29/2015 13:22	php-fpm[41366]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:22	php-fpm[41366]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm[41366]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:22	check_reload_status: Starting packages
    6/29/2015 13:22	php-fpm[19720]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 10.2X.XX.XX - Restarting packages.
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	php-fpm[19720]: /rc.newwanip: rc.newwanip: on (IP address: 10.2X.XX.XX) (interface: []) (real interface: ovpns4).
    6/29/2015 13:22	php-fpm[19720]: /rc.newwanip: rc.newwanip: Info: starting on ovpns4.
    6/29/2015 13:22	check_reload_status: Starting packages
    6/29/2015 13:22	php-fpm[19720]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 10.1X.XX.XX - Restarting packages.
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	php-fpm[19720]: /rc.newwanip: rc.newwanip: on (IP address: 10.1X.XX.XX) (interface: []) (real interface: ovpns3).
    6/29/2015 13:22	php-fpm[19720]: /rc.newwanip: rc.newwanip: Info: starting on ovpns3.
    6/29/2015 13:22	php-fpm[41366]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm[19720]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	check_reload_status: rc.newwanip starting ovpns4
    6/29/2015 13:22	kernel: ovpns4: link state changed to UP
    6/29/2015 13:22	kernel: ovpns4: link state changed to DOWN
    6/29/2015 13:22	check_reload_status: rc.newwanip starting ovpns3
    6/29/2015 13:22	kernel: ovpns3: link state changed to UP
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	check_reload_status: Reloading filter
    6/29/2015 13:22	kernel: ovpns3: link state changed to DOWN
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you d
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: ROUTING: setting default route to 45.XXX.XXX.XXX
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: IP has changed, killing states on former IP 192.168.XXX.XXX0.
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: rc.newwanip: on (IP address: 45.XXX.XXX.XXX) (interface: WAN[wan]) (real interface: em1).
    6/29/2015 13:22	php-fpm[73590]: /rc.newwanip: rc.newwanip: Info: starting on em1.
    6/29/2015 13:22	kernel: arpresolve: can't allocate llinfo for 192.168.XXX.XXX on em1
    6/29/2015 13:22	check_reload_status: rc.newwanip starting em1
    6/29/2015 13:22	kernel: arpresolve: can't allocate llinfo for 192.168.XXX.XXX on em1
    6/29/2015 13:22	kernel: arpresolve: can't allocate llinfo for 192.168.XXX.XXX on em1
    6/29/2015 13:21	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:21	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:21	rtsold[33716]: <sendpacket>sendmsg on em1: Operation not permitted
    6/29/2015 13:21	php-fpm[73590]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:21	php-fpm[37265]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:21	check_reload_status: Starting packages
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.XXX.XXX0 -> 192.168.XXX.XXX0 - Restarting packages.
    6/29/2015 13:21	php-fpm[73590]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:21	check_reload_status: Starting packages
    6/29/2015 13:21	php-fpm[73590]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 10.2X.XX.XX - Restarting packages.
    6/29/2015 13:21	check_reload_status: Reloading filter
    6/29/2015 13:21	php-fpm[73590]: /rc.newwanip: rc.newwanip: on (IP address: 10.2X.XX.XX) (interface: []) (real interface: ovpns4).
    6/29/2015 13:21	php-fpm[73590]: /rc.newwanip: rc.newwanip: Info: starting on ovpns4.
    6/29/2015 13:21	check_reload_status: Starting packages
    6/29/2015 13:21	php-fpm[73590]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 10.1X.XX.XX - Restarting packages.
    6/29/2015 13:21	check_reload_status: Reloading filter
    6/29/2015 13:21	php-fpm[73590]: /rc.newwanip: rc.newwanip: on (IP address: 10.1X.XX.XX) (interface: []) (real interface: ovpns3).
    6/29/2015 13:21	php-fpm[73590]: /rc.newwanip: rc.newwanip: Info: starting on ovpns3.
    6/29/2015 13:21	php-fpm[44798]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:21	php-fpm[44798]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:21	rtsold[33716]: <sendpacket>sendmsg on em1: Operation not permitted
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: Creating rrd update script
    6/29/2015 13:21	check_reload_status: rc.newwanip starting ovpns4
    6/29/2015 13:21	kernel: ovpns4: link state changed to UP
    6/29/2015 13:21	kernel: ovpns4: link state changed to DOWN
    6/29/2015 13:21	check_reload_status: rc.newwanip starting ovpns3
    6/29/2015 13:21	kernel: ovpns3: link state changed to UP
    6/29/2015 13:21	check_reload_status: Reloading filter
    6/29/2015 13:21	check_reload_status: Reloading filter
    6/29/2015 13:21	kernel: ovpns3: link state changed to DOWN
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
    6/29/2015 13:21	check_reload_status: updating dyndns wan
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you d
    6/29/2015 13:21	php-fpm[37067]: /rc.linkup: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.8 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 13 leases to leases file. Listening on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Sending on BPF/em0/00:15:xx:xx:xx:xx/192.168.xxx.xxx/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server. If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: ROUTING: setting default route to 192.168.XXX.XXX
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.XXX.XXX0) (interface: WAN[wan]) (real interface: em1).
    6/29/2015 13:21	php-fpm[37265]: /rc.newwanip: rc.newwanip: Info: starting on em1.
    6/29/2015 13:21	rtsold[33716]: <sendpacket>sendmsg on em1: Operation not permitted
    6/29/2015 13:21	check_reload_status: Restarting ipsec tunnels
    6/29/2015 13:21	php-fpm[37067]: /rc.linkup: ROUTING: setting default route to 192.168.XXX.XXX
    6/29/2015 13:21	php-fpm[37067]: /rc.linkup: Accept router advertisements on interface em1
    6/29/2015 13:21	check_reload_status: rc.newwanip starting em1
    6/29/2015 13:21	php-fpm[37067]: /rc.linkup: HOTPLUG: Configuring interface wan
    6/29/2015 13:21	php-fpm[37067]: /rc.linkup: DEVD Ethernet attached event for wan
    6/29/2015 13:21	php-fpm[36696]: /rc.linkup: Shutting down Router Advertisment daemon cleanly
    6/29/2015 13:20	php-fpm[37265]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:20	rtsold[42689]: <sendpacket>sendmsg on em1: Operation not permitted
    6/29/2015 13:20	check_reload_status: Starting packages
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 45.XXX.XXX.XXX -> 192.168.XXX.XXX0 - Restarting packages.
    6/29/2015 13:20	php-fpm[30206]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:20	php-fpm[30206]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:20	php-fpm[30206]: /rc.start_packages: Restarting/Starting all packages.
    6/29/2015 13:20	php-fpm[30206]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:20	check_reload_status: Starting packages
    6/29/2015 13:20	php-fpm[30206]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 10.2X.XX.XX - Restarting packages.
    6/29/2015 13:20	check_reload_status: Reloading filter
    6/29/2015 13:20	php-fpm[30206]: /rc.newwanip: rc.newwanip: on (IP address: 10.2X.XX.XX) (interface: []) (real interface: ovpns4).
    6/29/2015 13:20	php-fpm[30206]: /rc.newwanip: rc.newwanip: Info: starting on ovpns4.
    6/29/2015 13:20	check_reload_status: Starting packages
    6/29/2015 13:20	php-fpm[30206]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 10.1X.XX.XX - Restarting packages.
    6/29/2015 13:20	check_reload_status: Reloading filter
    6/29/2015 13:20	php-fpm[30206]: /rc.newwanip: rc.newwanip: on (IP address: 10.1X.XX.XX) (interface: []) (real interface: ovpns3).
    6/29/2015 13:20	php-fpm[30206]: /rc.newwanip: rc.newwanip: Info: starting on ovpns3.
    6/29/2015 13:20	php-fpm[30206]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:20	php-fpm[30206]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt2).
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: Creating rrd update script
    6/29/2015 13:20	check_reload_status: Reloading filter
    6/29/2015 13:20	kernel: ovpnc2: link state changed to DOWN
    6/29/2015 13:20	check_reload_status: Reloading filter
    6/29/2015 13:20	php-fpm[36696]: /rc.linkup: DEVD Ethernet detached event for wan
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: The command '/usr/local/sbin/radvd -p /var/run/radvd.pid -C /var/etc/radvd.conf -m syslog' returned exit code '1', the output was ''
    6/29/2015 13:20	kernel: ovpnc1: link state changed to DOWN
    6/29/2015 13:20	kernel: ovpns4: link state changed to UP
    6/29/2015 13:20	kernel: ovpns4: link state changed to DOWN
    6/29/2015 13:20	kernel: ovpns3: link state changed to UP
    6/29/2015 13:20	kernel: ovpns3: link state changed to DOWN
    6/29/2015 13:20	kernel: id get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-bugs at isc.org mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate mailing list as described in the README file. exiting.'
    6/29/2015 13:20	kernel: please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-bugs at isc.org mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate mailing list as described in the README file. exiting.'
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: ROUTING: setting default route to 192.168.XXX.XXX
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: IP has changed, killing states on former IP 45.XXX.XXX.XXX.
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.XXX.XXX0) (interface: WAN[wan]) (real interface: em1).
    6/29/2015 13:20	php-fpm[37265]: /rc.newwanip: rc.newwanip: Info: starting on em1.
    6/29/2015 13:20	rtsold[42689]: <sendpacket>sendmsg on em1: Operation not permitted
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	check_reload_status: Restarting ipsec tunnels
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	php-fpm[30206]: /rc.linkup: ROUTING: setting default route to 192.168.XXX.XXX
    6/29/2015 13:20	php-fpm[30206]: /rc.linkup: Accept router advertisements on interface em1
    6/29/2015 13:20	check_reload_status: rc.newwanip starting em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1
    6/29/2015 13:20	kernel: arpresolve: can't allocate llinfo for 45.XXX.XXX.XXX on em1</sendpacket></sendpacket></sendpacket></sendpacket></sendpacket> 
    


  • The "arpresolve: can't allocate llinfo" is what happens when the gateway IP logged there isn't reachable, most often because the NIC loses link, or when the gateway IP is no longer on any locally-attached subnet. Both of those is what's happening there. "rc.linkup: DEVD Ethernet attached event for wan". Also looks to be pulling a private IP when it re-gains link, where you had a public IP previously.

    I'm guessing what's happening is your modem is rebooting, when it comes back up the modem itself starts handing out 192.168.x.x IPs because it's lost its uplink. Using "Reject Leases From" for 192.168.0.0/16 on WAN should help with part of that, where you're probably staying down for longer than necessary because you're picking up the IP from the modem. The fact the modem is apparently rebooting is another problem entirely though, and outside the firewall.



  • Hmmm interesting. Would running pfSense as a KVM virtual machine be a possible issue or are you pretty sure its the modem?



  • That might change things, since it complicates the networking portion. Depends on your host's networking config as to whether bringing down the physical interface (modem reboot) will bring down the NIC within the VM. The problem could be within KVM or its host OS in that case, though it sounds so much like the circumstance where your modem reboots that it seems still likely it's along the lines of what I described above. Try unplugging your modem and see if the VM loses link. If not, then it's more than just the modem and likely something within KVM or its host OS. If WAN does lose link when you do that, then it probably is what I described above.



  • @cmb:

    The "arpresolve: can't allocate llinfo" is what happens when the gateway IP logged there isn't reachable, most often because the NIC loses link, or when the gateway IP is no longer on any locally-attached subnet. Both of those is what's happening there. "rc.linkup: DEVD Ethernet attached event for wan". Also looks to be pulling a private IP when it re-gains link, where you had a public IP previously.

    I'm guessing what's happening is your modem is rebooting, when it comes back up the modem itself starts handing out 192.168.x.x IPs because it's lost its uplink. Using "Reject Leases From" for 192.168.0.0/16 on WAN should help with part of that, where you're probably staying down for longer than necessary because you're picking up the IP from the modem. The fact the modem is apparently rebooting is another problem entirely though, and outside the firewall.

    @cmb, you are correct, the modem is rebooting. I was finally able to witness this tonight. It does this multiple times each day. Any ideas on why the modem keeps rebooting? Hoping I don't need to purchase a new modem but I suppose if it fixes the rebooting I would look into it.