Creat a PPPOE server



  • hello all .
    I Installed the new pfsense
    I have

    ed0 = Lan     =>  192.168.70.1/24
                     DNS1 = 10.0.0.138
                     DNS2 = 11.0.0.138
                     DHCP = Yes

    Firewall Rules =>   Action = Pass ,
                             Interface = Lan ,
                             Protocol = Any ,
                             Source = LanSubnet ,
                             Destination = Any ,
                             Gateway = default ,

    The client computers have an internet on this interface

    –-----
    A new interface for PPPOE clients so I installed new interface

    ed1 = PPPOE   => 192.168.0.1/24
                       Gateway = blank (?)
                       Type      = Static
                       DHCP = NO

    This Interface for WAN 1

    rl0 = WAN1     => 11.0.0.1/24
                       Gateway = 11.0.0.138 (ROUTER-1)
                       Type      = Static

    This Interface for WAN 2

    rl1 = WAN2     => 12.0.0.1/24
                       Gateway = 12.0.0.138 (ROUTER-2)
                       Type      = Static


    The Question

    I enabled The PPPOE Server From services and I do this Configuration

    Interface = PPPOE (ed1)
    Subnet netmask = 24
    Server address = 192.168.3.254
    Remote address range = 192.168.3.0

    then I add A new user and give him an IP address = 192.168.3.2

    now from this interface I can Use the PPPOE Connection , BUT I DONT HAVE INTERNET CONNECTION

    what I ned to do to Have Internet connection On this interface with PPPOE server ???

    -----thanks



  • Add rules at firewall>rules, pppoe tab to allow traffic.


Locked