Astro Security Gateway 220 LCM-162 LCDProc config?



  • I have an ASG 220 that has an LCD module controlled by an LCM-162.

    Does anyone know how to configure this?

    There is a very old post about getting this working on FBSD but it requires compiling from source ( http://www.tecnowledge.net/2009/06/getting-lcdproc-to-work-with-an-lcm-162-freebsd/ ). With it being so old I didn't know how relative it was to the current LCDproc.

    I get backlighting but no display and the service terminates after a second or two killing the backlight with these settings:

    
    [server]
    DriverPath=/usr/local/lib/lcdproc/
    Driver=lcdm001
    Bind=127.0.0.1
    Port=13666
    ReportLevel=3
    ReportToSyslog=yes
    User=nobody
    Foreground=no
    ServerScreen=no
    GoodBye="Thanks for using"
    GoodBye="    pfSense     "
    WaitTime=5
    ToggleRotateKey=Enter
    PrevScreenKey=Left
    NextScreenKey=Right
    ScrollUpKey=Up
    ScrollDownKey=Down
    [menu]
    MenuKey=Escape
    EnterKey=Enter
    UpKey=Up
    DownKey=Down
    [lcdm001]
    Device=/dev/lpt0